Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Product Type
- Technologies
Features & Benefits
- Labeling Claims
- Ready-to-Use Product Features
- Specific Features
- Primerless adhesion to most substrates
- Resistant to tracking and erosion
- Self-leveling
Applications & Uses
- Markets
- Cure Method
- Plastics & Elastomers End Uses
- Application Details
Repair material for silicone rubber sheds and housings of longrod and hollow core insulators, arresters and bushings.
Processing
- POWERSIL® INSULATOR FINISH shows good primerless adhesion to cured silicone rubber and many substrates. We recommend to run preliminary tests to optimize conditions for the paricular application.
- Applications
Insulators
Properties
- Cured Properties
- Uncured Properties
- Properties
- Acetic acid-curing system
- Very good resistance to weathering and air pollution
- Note
Curing conditions: 2 mm, 14d / 23°C / 50% RH
| Value | Units | Test Method / Conditions | |
| Density (in water, at 23°C) | 1.09 | g/cm³ | DIN EN ISO 1183-1 A |
| Dielectric Strength | 20 | kV/mm | IEC 60243-1 |
| Elongation (at break) | 500 | % | ISO 37 Type 1 |
| Permittivity (at 50Hz) | 3 | — | IEC 62631-2-1 |
| Shore Hardness A | 20 | — | DIN ISO 48-4 |
| Tensile Strength | 1.4 | N/mm² | ISO 37 Type 1 |
| Tracking Resistance | 1A 3.5 | — | IEC 60587 |
| Volume Resistivity | 1 x 10¹⁵ | Ohm-cm | IEC 62631-3-1 |
| Value | Units | Test Method / Conditions | |
| Curing Time (at 23°C, 50 %r.h) | 12 | hour/mm | — |
| Dynamic Viscosity | 200000 | mPa·s | DIN EN ISO 3219 |
| Skin Formating Time (at 23°C, 50% r.h) | 10 - 30 | minutes | — |
Regulatory & Compliance
- Certifications & Compliance
- Chemical Inventories
- Quality Standards
Packaging & Availability
- Country Availability
- Regional Availability