Knowde Enhanced TDS
Identification & Functionality
- Product Type
- Technologies
- Product Families
Features & Benefits
- Ready-to-Use Product Features
Applications & Uses
- Markets
- Application Area
- Cure Method
- Applications
- Bonding & Sealing
- Cured-In-Place-Gaskets (Dry Type)
- Application Details
- The platinum catalyst is contained in Component A. Only components A and B that have the same lot number may be processed together! Mixing of the components To ensure both optimum flow and, in case a Pigment Paste FL was added, also full homogeneity of the material by uniformly dispersing any pigment that might have settled during storage, the components should be stirred thoroughly before they are removed from or processed in their containers.
- It is absolutely imperative that any equipment, such as mixing vesses, spatulas and stirrers, that is used to process Component A (which contains the platinum catalyst) or the mixture of both components does not come in contact with Component B (which contains the crosslinker).Therefore, all equipment should be clearly labeled. - silicone rubber for temperature sensitive sealing applications - particularly suitable for fuel cell seals.
Properties
- Catalyst Properties
- Cured Properties
- Uncured Properties
- Properties
- High tear resistance
- Long potlife at ambient temperature
- High reactivity already at 100 °C
- Outstanding compression set
- Suitable for film process
- Cure at low mold temperature possible
- High resistance to fuel cell environment
- Note
Cure conditions: 5 min / 165 °C in press for cured properties.
| Value | Units | Test Method / Conditions | |
| Dynamic Viscosity (at 23°C, Shear rate 25 s⁻¹) | 30000 | mPa·s | ISO 3219 |
| Dynamic Viscosity (Component B, at 23°C) | 50000 | mPa·s | ISO 3219 |
| Kick-Off Temperature | 95 | °C | ISO 6502 |
| Mix Ratio (A:B) | 1:1 | parts by weight | — |
| Pot Life (at 23°C) | 24 | hours | — |
| T20 (at 110°C) | 30 | seconds | — |
| T90 (at 110°C) | 60 | seconds | ISO 6502 |
| Value | Units | Test Method / Conditions | |
| Coefficient of Linear Expansion (0.0 - 150.0°C) | 2.82 x 10⁻⁴ | m/mK | — |
| Compression Set (at 22 hours, 120°C) | 4 | % | DIN ISO 815-1 type B method A |
| Density (in water, at 23°C) | 1.07 | g/cm³ | DIN EN ISO 1183-1 A |
| Elongation (at break) | 300 | % | ISO 37 Type 1 |
| Shore Hardness A | 40 | — | DIN ISO 48-4 |
| Tear Strength | min. 14 | N/mm | ASTM D 624 B |
| Tensile Strength | 5 | N/mm² | ISO 37 Type 1 |
| Value | Units | Test Method / Conditions | |
| Density (at 23°C, Componenet A) | 1.07 | g/cm³ | DIN EN ISO 2811-1 |
| Density (at 23°C, Componenet B) | 1.07 | g/cm³ | DIN EN ISO 2811-1 |
| Dynamic Viscosity (Component A, at 23°C, Shear rate 0.5 s⁻¹) | 60000 | mPa·s | ISO 3219 |
| Dynamic Viscosity (Component B, at 23°C, Shear rate 0.5 s⁻¹) | 30000 | mPa·s | ISO 3219 |
Regulatory & Compliance
- Certifications & Compliance
Packaging & Availability
- Country Availability
- Regional Availability