Products results

Acrylic Conformal Coating 419D is a 1-part acrylic conformal coating that cures to a durable, flexible and smooth finish. It is easy to apply and can be handled in 10 minutes. It may be removed with appropriate strippers, or soldered through for repair or rework. 419D creates a robust moisture barrier that protects printed circuit boards in humid environments. It protects effectively against moisture, corrosion, fungus, dirt, dust, thermal shock, short circuits, high voltage arcing, and static discharge.

Super Shield™ Nickel Conductive Paint 841AR is a conductive paint that consists of a 1-part, solvent-based acrylic lacquer, pigmented with a highly conductive nickel flake. It is smooth, hard, and abrasion resistant. It can be easily applied by brush or spray. It has a quick dry time, with no heat cure necessary. It adheres strongly to most injection molded plastics, such as ABS, PBT, PVA and ABS/PC blend. It also provides strong corrosion resistance and is suitable for use in marine environments. 841AR provides a conductive coating for the interior of plastic electronic enclosures that

4223F is a 1-part, heat curing, UL 746E certified, thermoset polyurethane conformal coating. It cures to a durable, flexible, scratch resistant, and smooth finish. It is easy to apply and can be handled in 15 minutes. It cures in only 2 hours at 100 °C (212 °F). It may be removed with appropriate strippers, or soldered through for repair or rework. 4223F protects printed circuit boards in chemically challenging environments. It provides strong protection against aggressive chemicals, corrosion, moisture, fungus, dirt, dust, thermal shock, abrasion, short circuit, high-voltage arcing, and static discharge.

Curran® Reef, Barrier Coating is a coating for paper and cardboard packaging. The product is free from fluorine and can be recycled . With REEF: 2 coating as a single coat ( or topcoat) ,barrier coatings with excellent water repellency and very good grease proof properties towards grease and oil can be achieved. The REEF :2 coatings are heat-sealable and improved oxygen barrier.

Super Gloss Finishing

Circa 1850® NU-LUSTRE-55 cures to a thick, high gloss coat in about 24 hours. One coat is usually all that is needed to produce the desired finish. Additional coats may be applied after previous coats have cured for a minimum of 24 hours, lightly sanding in between coats. NU-LUSTRE-55 may be applied over almost any surface, rough or smooth. It may be applied over leather, wood, varnish, ceramics, rocks, stones, dried flowers, shells, and many others. It is ideal as a gap/cavity/crack filler. If in doubt, test a small sample of the item you wish to cover. NU-LUSTRE-55 will NOT ADHERE to silicone or wax. Before starting on your project, we strongly suggest you do a TEST PIECE to help you become familiar with this type of product, and for you to decide whether this will be the right product for the type of project you are doing.

Circa 1850® DEX Brown Wood Preservative is a paintable wood preservative that provides a brown finish. It is developed exclusively for exterior, above ground use. It provides paintable protection against rot and mildew and is designed for projects where a brown change is desired. It is ideal for the protection of decks, fences, doors, sashes, window frames, outdoor furniture and millwork.

Circa 1850® DEX Green Wood Preservative is a paintable wood preservative that provides a soft green finish. It is developed exclusively for exterior, above ground use. It provides paintable protection against rot and mildew. It is ideal for the protection of decks, fences, door sashes window frames and millwork.

Circa 1850® DEX Brown End Cut Wood Preservative is a paintable wood preservative that provides a brown finish. It is developed exclusively for exterior, above ground use. It provides paintable protection for cut or drilled pressure treated wood against rot and mildew and is designed for projects where a brown change is desired. It is ideal for the protection of decks, fences, doors, sashes, window frames, outdoor furniture and millwork.

Circa 1850® NU-LUSTRE-27 cures to a thick, high gloss coat in about 24 hours. One coat is usually all that is needed to produce the desired finish. Additional coats may be applied after previous coats have cured for a minimum of 24 hours, lightly sanding in between coats. NU-LUSTRE-27 may be applied over almost any surface, rough or smooth. It may be applied over leather, wood, varnish, ceramics, rocks, stones, dried flowers, shells, and many others. It is ideal as a gap/cavity/crack filler. If in doubt, test a small sample of the item you wish to cover. NU-LUSTRE-27 will NOT ADHERE to silicone or wax. Before starting on your project, we strongly suggest you do a TEST PIECE to help you become familiar with this type of product, and for you to decide whether this will be the right product for the type of project you are doing.

Circa 1850® NU-LUSTRE-57 cures to a thick, high gloss coat in about 24 hours. One coat is usually all that is needed to produce the desired finish. Additional coats may be applied after previous coats have cured for a minimum of 24 hours, lightly sanding in between coats. NU-LUSTRE-57 may be applied over almost any surface, rough or smooth. It may be applied over leather, wood, varnish, ceramics, rocks, stones, dried flowers, shells, and many others. It is ideal as a gap/cavity/crack filler. If in doubt, test a small sample of the item you wish to cover. NU-LUSTRE-57 will NOT ADHERE to silicone or wax. Before starting on your project, we strongly suggest you do a TEST PIECE to help you become familiar with this type of product, and for you to decide whether this will be the right product for the type of project you are doing.

EurikaCoat9455 is afully recyclable water-based coating based on vegetable waxes which provides specific barrier properties, such as a very low MVTR, very good OGR and very low Cobb values. It is specially designed for environmentally friendly fiber-based packagings and wraps. In addition, it also offers excellent release properties.

ClearClad DV-755 is engineered to meet lowest VOC limits. It is a latest generation e-coat with high performance& low VOC.

Circa 1850® DEX Below Grade End Cut Wood Preservative is a paintable wood preservative that provides a soft green finish. It is developed exclusively for exterior, above ground and below grade use. Use below grade when treating cuts, holes and injuries to pressure treated lumber. Circa 1850® DEX Below Grade End Cut Wood Preservative provides paintable protection for cut or drilled wood against rot and mildew. It is ideal for the protection of decks, fences, door sashes, window frames, cut ends of pressure treated wood and millwork. Circa 1850® DEX Below Grade End Cut Wood Preservative meets CSA standards for permanent wood foundations (PWF).

Circa 1850® NU-LUSTRE-66 cures to a thick, high gloss coat in about 24 hours. One coat is usually all that is needed to produce the desired finish. Additional coats may be applied after previous coats have cured for a minimum of 24 hours, lightly sanding in between coats. NU-LUSTRE-66 may be applied over almost any surface, rough or smooth. It may be applied over leather, wood, varnish, ceramics, rocks, stones, dried flowers, shells, and many others. It is ideal as a gap/cavity/crack filler. If in doubt, test a small sample of the item you wish to cover. NU-LUSTRE-66 will NOT ADHERE to silicone or wax. Before starting on your project, we strongly suggest you do a TEST PIECE to help you become familiar with this type of product, and for you to decide whether this will be the right product for the type of project you are doing.

ClearClad LC(408) is best in imaging coating, with its ultra-clear deposit it is a great fit for high polished surfaces where cosmetics are critical.

Circa 1850® Fine Wood Stain is designed to provide uniform staining on all unfinished interior wood surfaces. As a true oil-based stain, it highlights the natural grain of wood without causing any grain raise. As a "water-wash", Circa 1850® Fine Wood Stain is formulated to clean up easily with water. Circa 1850® Fine Wood Stain is available in 13 wood tones.

118-02 is a flexible, electrically insulating coating suitable for application by pad printing, spraying, dipping and syringe dispensing. This product features excellent adhesion to Kapton, Mylar, glass, and a variety of other surfaces. Unlike conventional insulating materials, this product is very resistant to flexing and creasing. Some applications for 118-02 include, but are not limited to, ribbon cables, polyimide flexible circuits, polymer thick film circuitry, and membrane switches.Features Flexible Epoxy dielectric

Detectable powder coating

POLURENE 6308 is recommended for the formulation of one component and two component barrier coatings for oily wood. It is very suitable for one component barrier coatings for wood with high vegetables fats content. Due to its aromatic content, POLURENE 6308 can be used for indoor and outdoor coatings, when a good yellowing resistance is not requested.

Along with special effect materials, ChemTech offers high-performance water-based varnish for wallpaper industry produced in-house and sourced from leading manufacturers. They are suitable for gravure, flexographic and rotary screen printing on paper, fleece and vinyl printing materials. Products are lightfast, highly thermally stable, wash-resistant, suitable for hot-embossing on vinyl and inhibitor printing. Water-based varnish is available with different performance and optical properties, which can be customized when requested.

An odorless, water based solution of potassium methyl siliconate developed to effectively treat a wide range of natural stone and masonry surfaces. CP-1000 provides long-lasting protection without altering the natural appearance of the substrate.

Along with special effect materials, ChemTech offers high-performance water-based varnish for wallpaper industry produced in-house and sourced from leading manufacturers. They are suitable for gravure, flexographic and rotary screen printing on paper, fleece and vinyl printing materials. Products are lightfast, highly thermally stable, wash-resistant, suitable for hot-embossing on vinyl and inhibitor printing. Water-based varnish is available with different performance and optical properties, which can be customized when requested.

HeBoCoat® PL-E 125 is a Boron Nitride coating in an ethanol base with the addition of an inorganic binder. The high temperature adhesive properties of the coating to metallic substrates, glass, ceramics and graphite are excellent.

HeBoCoat® EL-W 300 is a highly-concentrated, water-based, boron nitride suspension which was developed especially as an additive for galvanic baths. The extremely fine boron nitride particles ensure good suspension stability and a high storage rate during the electroplating process.

HeBoCoat® SL-E 200 is a Boron Nitride spray supplied in a practical aerosol can. Its ethanol base enables quick drying and good substrate wetting. The organic binder ensures excellent adhesion. The use of fine Boron Nitride powder particles provides good lubricating and release properties, also at high temperatures.

HeBoCoat® PL-E 200 is a Boron Nitride coating in an ethanol base with the addition of organic binders. Because of its excellent release and lubricating properties it is frequently used in the sintering of diamond tools.

HeBoCoat®EL-W 250 is a highly concentrated water-based Boron Nitride coating for use in the aluminum casting industry and in the finishing of fiber glass.

HeBoCoat® PL-W 130 is a pure, water-based and ready-to-use Boron Nitride coating with inorganic binders for high temperature processes. It is particulary suited for use in aluminum casting processes.

HeBoCoat ® SL-E 125* is a boron nitride spray supplied in an easy-to-use aerosol can. The use of an ethanol base ensures good surface wetting of the coated substrate as well as quick drying. The inorganic binders ensure very good adhesion to metals, glass, ceramics and graphite, especially at high temperatures. The proportion of fine boron nitride particles endow the resultant coating with good release and lubricating properties. HeBoCoat® SL-E 125 is a Boron Nitride spray supplied in a practical aerosol can. Its ethanol base enables good substrate wetting and quick drying. The high temperature adhesive properties of the coating to metallic substrates, glass, ceramics and graphite are excellent.

HeBoCoat® EL-W 100 is a water-based, ready-to-use boron nitride suspension that has been developed especially as a high-temperature release layer for forming processes. Thanks to the inorganic binder system, the product offers the optimum compromise between good substrate adhesion and a very good lubricating and release effect.

HeBoCoat® PL-W 200 is a pure, water-based Boron Nitride coating with organic binder, resulting in excellent surface wetting and adhesion.

RAMPAGE™ is an environmentally friendly, user safe, hard-shell, water base coating. A protectant from rust, corrosion, oxidation, paint discolor, wire damaging, and metals on ready mix trucks. Product quantity sold in 5 Gallons, 15 Gallons, 30 Gallons, 55 Gallons, 275 Gallons.

Circa 1850® Stain'n Varnish is both a wood stain and a varnish finish in one. Its unique gel formulation maintains a consistent blend of stain and varnish throughout the can, so there's no mixing or stirring required. As a result, you ensure uniformity from the beginning of your project to the end. And because it's a gel, it goes on without runs, drips or brush marks. Stain'n Varnish can be used on virtually any surface including wood furniture, molding, paneling and floors, pottery, metal, plastic, fiberglass, masonite and composites (or composite doors). Stain'n Varnish comes in 22 pre-mixed colors (and about a million custom-tinted colors) to suit any decor.

Circa 1850® DEX Clear Wood Preservative is a paintable wood preservative that provides a clear finish. It is developed exclusively for exterior, above ground use. It provides paintable protection against rot and mildew and is designed for projects where no color change is desired. It is ideal for the protection of decks, fences, doors, sashes, window frames, outdoor furniture and millwork.

Circa 1850® AQUA Water-Based Varnish is a clear, tough coating that protects and beautifies wood. Its low odor and non-yellowing formula makes it an ideal finish for all interior wood surfaces. Circa 1850® Aqua Water-Based Varnish can be recoated in as little as 2 hours. It brings out the natural warmth of the wood and is formulated to clean up easily with water. Its micro-formulation permits clog-free spray application. Available in GLOSS, SEMI-GLOSS and SATIN.