Products

PEX-W100KP is a mixture of mono- and di-Phosphate Ester(s). It imparts benefits like: Anti-Corrosion properties and Surface Tension reduction. It is a Phosphate Ester of an Oxo-Alcoholethoxylate with Potassium Hydrogen Phosphate in water.

ADDAPT BioWet 150R is a solvent free, ready biodegradable wetting agent which improves the Wet-Edge (open time) and Water Retention. It is a Polyhydroxy - Amide. The product is EINECS registered.

ADDAPT Anticor A40 is a water-soluble multi-metal anti-corrosion additive. It is a proprietary blend of PolyHydroxy Amides. All constituents are EINECS registered and comply with the FDA regulation.

ADDAPT_x0001_ PolySurF HPm is a solvent free UV-curable additive. It can also act as a co-polymerisable anionic surfactant and/or adhesion promoter with flame retardant properties. It is a proprietary mixture of Acrylated mono-and di-Phosphate ester; where the reactive Acrylate group is Methacrylate. It has a higher mono-content compared to PolySurF HP

ADDAPT PolySurF HP is a solvent free UV-curable additive. It can also act as a co-polymerisable anionic surfactant and/or adhesion promoter with flame retardant properties. It is a proprietary mixture of Acrylated mono-and di-Phosphate ester; where the reactive Acrylate group is Methacrylate.

ADDAPT Foamstop WS 17 is a highly effective, complete water-soluble Foam Control Agent. It is a proprietary blend of Polyalkyleneglycols and surface-active components. FDA-no - 21 CFR and 173.340

ADDAPTOL™ DB is a non-VOC oxygenated solvent for use as a coalescing agent in waterborne systems and tail solvent in Solvent borne systems. It is a proprietary mixture of branched esters of dibasic acids.

ADDAPT WaxMul WM 120 is a wax emulsion based on a balanced blend of Polyethylene and Paraffin waxes giving buffable films with excellent gloss and water repellent properties. It is an emulsion of Polyethylene and Paraffin waxes in water.

ADDAPT BioWet 75 is a biodegradable wetting and leveling agent for water based systems such as fountain solutions and water based lacquers. The product shows excellent static as well as dynamic surface tension values. It is a Polyhydroxy – Amide in water. The product is EINECS registered.

ADDAPT BioWet 45 is a solvent free, ready biodegradable wetting/leveling agent for aqueous systems such as cleaning agents and coatings/lacquers on glass substrates. ADDAPT BioWet 45 exhibits good dynamic and static surface tension values. A blend of PolyAlkylene Glycols and Polyhydroxy - Amide. The ingredients are EINECS registered.

ADDAPT Foamstop VF 35N is a highly effective Foam Control Agent for low VOCphysical Emulsion systems based on PVAC, Styrene/Acrylics or pure Acrylics. It is a proprietary blend of oils with PAG’s and surface active components - MOSH/MOAH free - All constituents comply with the FDA regulation (incidental contact with foodstuff). FDA regulation: #173.340

ADDAPT BioWet 60 is a solvent free, ready biodegradable Glass Adhesion promoter and Glass Corrosion inhibitor for aqueous systems on glass substrates. A proprietary blend of PolyAlkylene Glycols and Polyhydroxy – Amide. All constituents are EINECS registered and comply with the FDA regulation (incidental contact with foodstuff).

ADDAPT PolySurF HPH is a solvent-free UV-curable additive. It can also act as a polymerisable hydrophilic non-ionic surfactant and/or co-polymerisable plasticizer. It is a proprietary mixture of Acrylated mono- and di-Phosphate ester; the mono-Phosphate ester being O-(EO)n>10-CH3 modified; where the reactive Acrylate group is Methacrylate

ADDAPT WaxMul C 325 is a wax emulsion based on refined Type 3-Carnauba wax. This Carnauba wax gives excellent Scratch Resistance, Lubrication, Release & Anti-Block. It is an emulsion based on T3-type Carnauba wax in water. FDA Status - approved under 21 CFR 175.105, 175.300, 175.320, 176.170 and 176.180

ADDAPT WaxMul WM 45 is a very high melting point PP-wax emulsion giving excellent surface hardness and blocking resistance. It is an emulsion of Polypropylene wax in water.

ADDAPT BioWet 175R is a solvent free, biodegradable wetting/leveling agent which improves Open time and Flow in Textured masonry coatings and Plasters. It is a Polyhydroxy - Amide. The product is EINECS registered.

ADDAPT® Anticor A65N is a water-soluble multi-metal anti-corrosion additive. It is a proprietary blend of Organic Acids Salts and Silanes. All constituents are EINECS registered and comply with the FDA regulation.

ADDAPT CODIS 95 is an effective Co-Dispersant for (mineral) pigments and fillers. It is also suitable for colorants and solvent based Alkyd paints. ADDAPT CODIS 95 is a proprietary blend of Alkanol-amines in water. All constituents are EINECS registered and in compliance with the detergent directive EG/648/2004

ADDAPT WaxMul WM 15 is a high melting point PE-wax emulsion with excellent resistance to yellowing. It is an emulsion of Polyethylene wax in water.

ADDAPT BioWet 35 is a solvent free, ready biodegradable wetting/leveling agent for aqueous systems such as cleaning agents and coatings/lacquers on wood substrates. ADDAPT BioWet 35 exhibits good dynamic and static surface tension values. A blend of PolyAlkylene Glycols, dispersants and Polyhydroxy - Amide. The ingredients are EINECS registered.

ADDAPT Anticor P is a phosphorous based corrosion inhibitor. It acts as a multi metal corrosion inhibitor with emulsifying properties. It is a proprietary mixture of mono-and di-Phosphate ester and surface active ingredients.

ADDAPT Foamstop 666K is a water soluble Foam Control Agent. It is a proprietary blend of Polyalkyleneglycols and surface-active components. All constituents are EINECS registered and comply with the FDA regulation. (incidental contact with foodstuff). FDA-no: 21 CFR and 173.340.

BioWet PC is a non-VOC polymeric coalescent for use as a process aid in Waterborne Systems to improve film forming properties. Proprietary polymeric composition and amphoteric component emulsified in water.

ADDAPT BioWet 450C is a VOC free, ready biodegradable wetting agent for aqueous systems such as cleaning agents and (paper) coatings. It is a proprietary blend off Polyalkylene glycols in water and surface active compounds

ADDAPT WaxMul WM 110 is a wax emulsion based on a balanced blend of Polyethylene and Paraffin waxes giving water repellent properties as well as a matting effect. It is an emulsion of Polyethylene and Paraffin waxes in water.

ADDAPT® Anticor A3N is a water free aluminum anti-corrosion additive. It can also be used for multi-metal protection of Copper/Brass and Ferrous substrates. It is a proprietary blend of phosphonates and organic silicates. All constituents comply with the FDA regulation

ADDAPT WaxMul C 125 is a wax emulsion based on refined Type 1-Carnauba wax. This Carnauba wax gives excellent Scratch Resistance, Lubrication, Release & Anti- Block. It is an emulsion based on T1-type Carnauba wax in water. FDA Status - approved under 21 CFR 175.105, 175.300, 175.320, 176.170 and 176.180

ADDAPT WaxMul WM 25 is a high melting point PE-wax emulsion giving excellent abrasion resistance and also improves the (wet) scrub resistance of Paints and Inks. It is an emulsion of Polyethylene wax in water.

ADDAPT PolySurF HPL is a solvent-free UV-curable additive. It can also act as a polymerisable lipophilic non-ionic surfactant and/or polymerisable plasticizer. It is a proprietary mixture of Acrylated mono-and di-Phosphate ester: the mono-Phosphate ester being O-C12-C14 modified; where the reactive Acrylate group is Methacrylate.

ADDAPT SILSTAB L 50 is a solvent free, Potassium Silicate solution for aqueous systems such as Plasters (Putz) and Coatings It is a stabilized Potassium Silicate solution.

ADDAPT PolySurF ACE is a solvent free polymerisable additive. It imparts benefits like: acid resistance, high gloss, excellent pigment wetting, water repellence, film appearance, UV stability and improved adhesion to thermoplastics. It is the Acrylic Acid adduct of the epoxy ester of Versatic Acid.

ESTER 20DA is a solvent free pigment dispersing agent for both solvent based and water based systems. It is especially recommended as dispersing agent for Carbon Black. ADDAPT® ESTER 20DA is a synthetic ester

ADDAPT Foamstop SL 30 is a highly effective and versatile Foam Control Agent. It is extremely stable both on storage and in the final system. It is a Silicone Emulsion containing minerals and fatty acid based emulsifiers

ADDAPT® Anticor L 4783 is a water-soluble multi-metal anti-corrosion additive. It is a proprietary blend of PolyHydroxycarbonate and Silanes. All constituents comply with the FDA regulation.

ADDAPT Foamstop 400F is a highly effective universal Foam Control Agent for water-based and solvent-based systems. Proprietary blend of Poly-Alkylene Glycols and Surface-Active components.

ADDAPT AS 400 is a Hydrophobe Modified Alkali Soluble Emulsion rheology modifier. It is an acrylic copolymer based emulsion in water