Products

ADM Native Starch 200 I is extracted from selected French wheat. It is used in the paper industry at three main stages of papermaking. Firstly, it is used in the mass that bonds cellulose-starch-cellulose in order to increase the mechanical strength of the paper. Secondly, it is used at the size press to strengthen the cohesion of the fiber surface and avoid bobbing. Finally, it is used in coating products to hide the irregularities of the surface and replace the natural macroporosity, giving an appropriate artificial microporosity for writing or printing.

Clin-Cat 810 Cationic Corn Starch #028810 is specifically prepared to produce a superior starch for the internal sizing of paper. This product can improve the retention of fillers such as titanium dioxide, calcium carbonate, and clay. It can also improve the retention of fine fibers and sheet strength (i.e., burst strength and Scott bond). This cationic corn starch is derivatized using a quaternary amine. Since its cationic charge is observed over a wide pH range, it can be suitable for either acidic or alkaline papermaking systems.

Clin-Cat 829 Cationic Corn Starch #028829 is specifically prepared with the addition of adipic acid to produce a superior starch for the internal sizing of paper. This product can improve the retention of fillers such as titanium dioxide, calcium carbonate, and clay. It can also improve the retention of fine fibers and sheet strength (i.e., burst strength and Scott bond). This cationic corn starch is derivatized using a quaternary amine. Since its cationic charge is observed over a wide pH range, it can be suitable for either acidic or alkaline papermaking systems.

ADM Industrial Crosslinked 180 is a modified maize starch that is hot water-soluble and well-suited for various industrial applications, especially in the papermaking industry. It is a non-GMO product and complies with the regulations set by the Food and Drug Administration under 21 CFR 175.105.

ADM Cationic Starch 163 is a cationic, hot water-soluble maize starch ideal for various industrial applications, especially in paper wet-end applications. It is a non-GMO product that complies with the regulations set by the Food and Drug Administration under 21 CFR 175.105.

Clin-Cat 870 Cationic Corn Starch LW #028870 is specifically prepared to produce a superior starch for the internal sizing of paper. As an industrial starch, this product can be used for ASA-size emulsification. It is a water-soluble polymer with the advantage of rapid hydration without increasing the temperature. With low shear mixing, this product can be mixed at different solid levels up to 25% in cold water.

Clinton 430 Oxidized Corn Starch #028430 is specifically processed to produce a superior converting starch that is well suited to the thermal converting techniques used in paper mill operations. When jet-cooked, the resulting paste displays a low viscosity and a clear appearance. It maintains desirable characteristics with a low setback rate, such as the white color and minimal residue. When dried, this starch forms clear, strong films that withstand the physical tests characteristic of the paper industry, such as the tensile, Mullen, and wax pick tests.

ADM Cationic Starch 146 is a cationic, hot water-soluble maize starch that is well-suited for a wide range of industrial applications, with a particular focus on paper wet-end applications. This non-GMO product is fully compliant with the regulations set by the Food and Drug Administration under 21 CFR 175.105.

Clinton 104 Corn Starch #028104 is one of a series of unmodified starches manufactured by ADM. This product has a high viscosity with a good body at both high and low solids. It is exceptionally well suited for use in thermal or chemical conversion processes. This starch product displays properties typical of unmodified, thick, boiling starches as well. As a converted starch paste, it maintains strong adhesive properties that can be used very efficiently in the surface sizing of paper.

ADM Cationic Starch 172 is a cationic maize starch that is hot water-soluble and well-suited for various industrial applications, especially paper surface treatment. Native starches are known for improving texture and tenderness, and ADM Cationic Starch 172 provides a clean and neutral flavor that won't interfere with the taste of the final product. Additionally, it is versatile and delivers textural benefits in a wide range of applications, including filled cakes, tortillas, and cereals.

ADM Cationic Starch 174 is a cationic maize starch that is hot water-soluble and well-suited for various industrial applications, especially paper surface treatment. It is a native starch that improves texture and tenderness, providing a clean and neutral flavor that won't interfere with the taste of the final product. Additionally, ADM Cationic Starch 174 is versatile and delivers textural benefits in a wide range of applications, including filled cakes, tortillas, and cereals.

ADM Cationic Starch 168 is a cationic, hot water-soluble maize starch ideal for various industrial applications, especially in paper wet-end applications. It is a non-GMO product that complies with the regulations set by the Food and Drug Administration under 21 CFR 175.105.

Clinton 131 Corn Starch #028131 is an enzyme-converting starch containing an effective buffer system for optimum pH control that helps maintain efficient utilization of the enzyme during the conversion process. This ADM starch has been designed to be equally suitable for surface sizing and coating adhesive applications. For surface sizing operations, the enzyme-converted starch pastes are translucent and white and can be readily diluted to any desired concentration at the size press to produce the needed viscosity. For coating color adhesive operations, this product (with the appropriate enzyme dose) can produce a thin viscosity and consistently convert to the same viscosity each time. The resulting paste does not have an excessive reaction to plasticizers normally used in coating formulations. Therefore, good control of the final coating color viscosity is maintained. The resulting pastes of this product from both low and high solid enzyme conversion cycles have strong adhesive properties, which are suitable for mills making different grades of surface-sized or coated paper.

ADM Native Starch 120 I is a hot water-soluble native maize starch suited for various industrial applications, especially paper surface treatment. It improves texture and tenderness, providing a clean, neutral flavor that won’t interfere with the finished product’s taste. Additionally, it also delivers textural benefits in a variety of applications, including filled cakes, tortillas, and cereals.

Clin-Cat 825 Cationic Corn Starch #028825 is specifically prepared to produce a superior starch for the internal sizing of paper. This product can improve the retention of fillers such as titanium dioxide, calcium carbonate, and clay and can be used for ASA-size emulsification. It also exhibits improved retention of fine fibers and sheet strength (i.e., burst strength and Scott bond) and is suitable for use at any paper furnish pH.

ADM Cationic Starch 165 is a cationic, hot water-soluble maize starch ideal for various industrial applications, especially in paper wet-end applications. It is a non-GMO product that complies with the regulations set by the Food and Drug Administration under 21 CFR 175.105.

ADM Modified Starch 160 I is a hot water-soluble maize starch preparation suited for various industrial applications, especially paper surface treatment. It is a non-GMO product that complies with the regulations set by the Food and Drug Administration under 21 CFR 175.105.

ADM Cationic Starch 166 is a cationic, hot water-soluble maize starch ideal for various industrial applications, especially in paper wet-end applications. It is a non-GMO product that complies with the regulations set by the Food and Drug Administration under 21 CFR 175.105.

Clin-Cat 880 Cationic Corn Starch HW #028880 is specifically prepared to produce a superior starch for the internal sizing of paper. As an industrial starch, this product can be used for ASA-size emulsification. It is a water-soluble polymer with the advantage of rapid hydration without increasing the temperature. With low shear mixing, this product can be mixed at different solid levels up to 25% in cold water.

Clin-Cat 840 Cationic Corn Starch #028840 is specifically prepared to produce a superior starch for the internal sizing of paper. This product can improve the retention of fillers such as titanium dioxide, calcium carbonate, and clay and can be used for ASA-size emulsification. It also exhibits improved retention of fine fibers and sheet strength (i.e., burst strength and Scott bond) and is suitable for use at any paper furnish pH.

Clinton 439 Oxidized Corn Starch #028439 is specifically processed to produce a superior converting starch that is well suited to the thermal converting techniques used in paper mill operations. When jet-cooked, the resulting paste displays a low viscosity and a clear appearance. It maintains desirable characteristics with a low setback rate, such as the white color and minimal residue. When dried, this starch forms clear, strong films that withstand the physical tests characteristic of the paper industry, such as the tensile, Mullen, and wax pick tests.

ADM Cationic Starch 167 is a cationic, hot water-soluble maize starch ideal for various industrial applications, especially in paper wet-end applications. It is a non-GMO product that complies with the regulations set by the Food and Drug Administration under 21 CFR 175.105.

ADM Native Starch 170 I is a hot water-soluble native maize starch suited for various industrial applications, especially paper surface treatment. It improves texture and tenderness, providing a clean, neutral flavor that won’t interfere with the finished product’s taste. Additionally, it also delivers textural benefits in a variety of applications, including filled cakes, tortillas, and cereals.

ADM Native Starch 182 I is a non-GMO native maize starch slurry that is obtained through physical extraction and is well-suited for various industrial applications. The use of native starches provides a clean and neutral flavor without interfering with the taste of the finished product. Additionally, native starches are versatile and can deliver textural benefits in a wide range of applications, including filled cakes, tortillas, and cereals, improving the texture and tenderness of the final product.

ADM Cationic Starch 155 is a hot water-soluble maize starch modified cationically to be used in various industrial applications, particularly in paper wet-end applications. This non-GMO product meets the regulatory requirements set by the Food and Drug Administration under 21 CFR 175.105.

Clinton 115 Corn Starch #028115 is one of a series of unmodified starches manufactured by ADM. This product is exceptionally well suited for use in thermal or chemical conversion processes. It has a high viscosity with a good body at both high and low solids. This starch product displays properties typical of unmodified, thick, boiling starches as well. As a converted starch paste, it maintains strong adhesive properties that can be used very efficiently in the surface sizing of paper.

ADM Cationic Starch 142 is a cationic maize starch that is hot water-soluble and well-suited for various industrial applications, especially paper surface treatment. Native starches are known for improving texture and tenderness, and ADM Cationic Starch 142 is no exception. It provides a clean and neutral flavor that won't interfere with the taste of the final product. The versatility of native starches is also evident with ADM Cationic Starch 142, as it delivers textural benefits in a wide range of applications, including filled cakes, tortillas, and cereals.