Products

Slip additive for solvent-borne coating systems. SCHWEGO mar 8304 is suitable for solvent-based systems as: air drying alkyds, alkyd/melamine combinations, self crosslinking and co-reacting polyacrylates, polyurethanes, nitrocellulose, acid curing melamine and urea systems, oil-free polyesters.

Highly effective wetting additive for solvent borne and water-based coating systems, free of PFOS & PFOA, based on environmental compliant C4, C6 technology. SCHWEGO fluor 6536 is suitable for solvent borne and water-based coating systems. Typical applications are:Reduction of surface tension; Prevention of floating and flooding effects; Prevention of cratering; Coating of edges; Co-wetting additive for pigment pastes.

Slip and leveling additive for water-based and UV-curing coating systems with wetting additive. SCHWEGO mar 6542 is mainly used in UV curing coating systems.

Wetting and dispersing additive for water-based coating systems, biodegradable, VOC-free. SCHWEGO wett 6295 shows excellent dispersing properties, preferred application during dispersion of organic and inorganic pigments in high solid content or systems of high PVC. SCHWEGO wett 6295 is intended for use in all water-based air drying, stoving and 2K-systems. It is compatible with the following binders:Alkyd resins, PE-systems, Epoxy esters, Acrylates, Styrene acrylates, PU-systems. SCHWEGO wett 6295 maintains the moisture level and can therefore also be used as humactant (advantageous when using e.g. PEG 400).

Defoamer and deaerator for water-based coating systems, silicone free. BLISTER FREE 55 has an excellent defoaming effect in all types of water-based alkyd systems, for instance in alkyd emulsions with and without co-solvents. There are also very good defoaming effects in modified alkyds and alkyd/acrylic hybrids.

Rheological additive for water-based coating systems, free of VOC, APEO and organotin. SCHWEGO pur 8025 is suitable for interior and exterior wall paints as well as for synthetic resin renderings and trowelling compounds or paste fillers based on polyacrylics, styrene copolymers, PU-dispersions or water thinnable alkyd systems. The high gloss retention is shown to particular advantage in glossy emulsion paints when compared with acrylic or cellulose based thickening additives.

Wetting and dispersing additive for solvent borne coating systems. SCHWEGO wett 6248 is especially suitable for enamels and industrial-, wood-, furniture coatings and pigment preparatios. The application in pigment preparations is recommended.

Multifunctional additive for water-based and solvent borne coating systems, free of ketoxime and aromates, biodegradable. ANTIGEL KF-D can be used in almost all water-based and solvent borne coating systems.

Highly effective wetting additive for solvent borne, water-based and high solid coating systems, free of PFOS & PFOA, based on environmental compliant C4, C6 technology. SCHWEGO fluor 6543 is suitable for solvent borne and water-based coating systems. Typical applications are:Reduction of surface tension; Prevention of floating and flooding effects; Prevention of cratering; Coating of edges; Co-wetting additive for pigment pastes.

Defoamer for solvent borne and water-based coating systems, silicone free. BLISTER FREE 75 shows very good defoaming properties in solvent borne: NC-systems and NC-combinations, AC- and epoxy-systems, PU and air drying acrylic systems, BLISTER FREE 75 has very good defoaming effect in water-based coating systems based on the following binders: Long oil alkyds, Medium oil alkyds, Acrylate/medium oil alkyds, Acrylate/long oil alkyds, Epoxides.

Multifunctional additive with good wetting and dispersing properties for solvent-based and water borne coating systems, biodegradable. ANTIGEL is mainly used in solvent containing systems based on alkyds, alkyd/melamine, nitrocellulose combinations and polyesters. The above mentioned properties of ANTIGEL are also suitable for coating systems based on alkyds, alkyd/acrylic and other systems.

Slip additive for water-based and solvent borne coating systems, VOC-free. SCHWEGO mar 8311 is mainly used in solvent borne air drying and stoving coating systems. SCHWEGO mar 8311 can be used in most binder systems except some with hydroxyl groups.

Levelling additive for water-based coating systems, VOC-free. SCHWEGO flow 8058 can be used in virtually all water thinnable coating systems. SCHWEGO flow 8058 contains water as the only volatile component, which makes it especially suitable for solvent free water thinnable systems.

Deaerating additive for solvent borne, water-based and solvent free coating systems, silicone free. SCHWEGO foam 6351 is suitable for almost all solvent-based and solvent free coating systems. It is particularly effective in hammer tone finishes and structural coatings, reactive thick film systems, heavily pigmented coating systems and formulations, suitable for airless spraying. SCHWEGO foam 6351 is also effective in aqueous industrial finishes (alkyd/melamine systems).

Wetting and dispersing additive for solvent borne and water-based coating systems, anionic, biodegradable, VOC-free. SCHWEGO wett 6267 is especially suitable for enamels and industrial-, wood-, furniture coatings and pigment preparations. The application in pigment preparations is recommended.

Defoamer and deaerating additive for water-based coating systems, VOC- and silicone free. SCHWEGO foam 8333 is especially suitable to defoam systems based on polyurethane, polyester and their hybrids. It is effective as defoamer and as de-aerating additive.

Slip additive for water-based coating systems. SCHWEGO mar 8305 is suitable for water borne systems such as: air drying alkyd resins, alkyd/melamine combinations, self and foreign crosslinking polyacrylic resins, polyurethanes, nitrocellulose systems, acid curing melamine and urea systems, oil-free polyesters.

Defoamer for solvent borne and water-based coating systems, VOC-free. SCHWEGO foam 6354 is effective in almost all water-based and solvent borne 1K- and 2K-coating systems composed of: Air drying and stoving alkyds, Epoxy systems, PU-systems, Acrylics, Special areas of application are thick film systems, printing inks and coil coating systems.

Defoamer for water-based coating systems, silicone free. SCHWEGO foam 8013 is a highly effective defoamer suitable for water- based systems and adhesives especially for those based on polyurethane and acrylate.

Rheological additive against settling for solvent borne coatings, biodegradable. NO SED is suitable for solvent borne coatings based on alkyde (oven and air drying), acrylic, epoxy, polyester, chlorinated rubber, automotive and industrial coatings as well as road marking paints and zinc dust primers.

Levelling additive for water-based coating systems. SCHWEGO flow 6533 is recommended for aqueous coatings, printing inks and overprint varnishes.

Defoamer and deaerator for water-based coating systems. SCHWEGO foam 6305 is suitable in most water-based systems. Main application field of SCHWEGO foam 6305 are coating systems with low pigment content and clear coats. Using area are wood coatings, high gloss paints, parquet floorings, industrial coatings and adhesives.

Wetting additive for water-based coating systems. SCHWEGO wett 6237 can be used in all types of water-based systems such as:Dispersionen, Emulsions, Hybrids, Neutralization systems. SCHWEGO wett 6237 is suitable for organic and inorganic pigments.

Wetting and dispersing additive for solvent borne coating systems, biodegradable, VOC-free. SCHWEGO wett 6264 can be used to disperse inorganic and organic pigments or carbon black. It is especially suitable for the production of universal pastes and highly filled systems.

Slip and leveling additive for solvent borne coating systems. SCHWEGO mar 6506 is suitable for solvent borne systems as:air drying alkyds, alkyd/melamine combinations, self crosslinking and co-reacting polyacrylates, polyurethanes, nitrocellulose, acid curing melamine and urea systems, oil-free polyesters.

Wetting and dispersing additive for solvent borne coating systems, biodegradable. WETT AGENT 8023 is intended for use in all solvent borne air drying, stoving and 2K- systems. It is compatible with the following binders:alkyd resins, epoxy esters, polyurethane, acrylic resins, bitumen, epoxy resins, chlorinated rubber, nitrocellulose, PVC mixed polymers.

Wetting and dispersing additive for solvent borne coating systems, biodegradable. WETT AGENT is intended for use in all solvent borne air drying, stoving and 2K- systems. It is compatible with the following binders:acrylic resins, alkyd resins, bitumen, chlorinated rubber, epoxy esters, epoxy resins, nitrocellulose, polyurethane, PVC mixed polymers.

Wetting and dispersing additive for solvent borne coating systems. SCHWEGO wett 6249 is especially suitable for enamels and industrial-, wood-, furniture coatings and pigment preparatios. The application in pigment preparations is recommended.

Multifunctional additive with good wetting and dispersing properties for solvent borne and water-based coating systems. ANTIGEL 6217 is mainly used in solvent containing systems based on alkyds, alkyd/melamine, nitrocellulose combinations and polyesters. The above mentioned properties of ANTIGEL 6217 are also suitable for coating systems based on alkyds, alkyd/acrylic and other systems.

Wetting and dispersing additive for solvent borne coating systems, biodegradable. SCHWEGO wett 8081 can be used in almost all conventional industrial coatings, especially in alkyd, one-component epoxy coatings and pigment pastes. SCHWEGO wett 8081 is generally not suitable for air-drying acrylate coatings.

Bernd Schwegmann BLISTER FREE 3 is a defoamer and deaerator for solvent borne and water-based coating systems, silicone-free. BLISTER FREE 3 can be used in solvent borne and water-based systems. In solvent borne systems BLISTER FREE 3 is particularly effective as deaerating and partially also as leveling additive. BLISTER FREE 3 is especially suitable for systems based on:Alkyd, Alkyd/polyester, Unsaturated polyester, PU, Acrylates. BLISTER FREE 3 is also very effective in water-based coating systems, particulary if they are based on:Alkyd/acrylics, Saturated polyesters, Epoxy systems.

Slip additive for solvent-borne coating systems. SCHWEGO mar 8300 is mainly used in solvent-based air drying and stoving coating systems. SCHWEGO mar 8300 can be used in most binder systems except some with hydroxyl groups.

Defoamer for water-based coating systems, free of VOC. SCHWEGO foam 8339 can be used in all aqueous coating formulations. Main application field are non- or low- pigmented systems as parquet floorings, furniture coatings, high gloss emulsion paints, wood coatings, industrial coatings and printing inks based on fine size acrylic emulsions, polyurethane emulsions, hybrid formulations, alkyd emulsions, aqueous two pack polyurethane emulsions and UV-dispersions.

Rheological additive for water-based coating systems, free of VOC, APEO and organotin. SCHWEGO pur 8350 is suitable for interior and exterior wall paints, water-based coatings and anticorrosive coatings, modified resin plasters and fillers based on fine size Polyacrylates, Styrene copolymers, Vinylacetate- or PUR-dispersions. SCHWEGO pur 8350 shows a high gloss retention in glossy emulsion paints compared to acrylic and cellulosic thickening additives.

Defoamer for water-based coating systems, VOC-free, biodegradable. SCHWEGO foam 8336 defoams very well in all kinds of clear coatings and slightly pigmented systems, printing inks and UV-curing systems, especially those based on acrylics. The defoaming effect is also very good in wood varnishes and adhesives.

Defoamer for solvent borne coating systems, biodegradable. MITTEL S is suitable for nearly all solvent-based systems. MITTEL S is very efficient in alkyd (air drying), alkyd/polyester (heat stoving), chlorinated rubbers, epoxide, polyurethane, thermoplastic acrylic and reactive acrylics systems.