Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- CASE Ingredients Functions
- Technologies
Features & Benefits
- Labeling Claims
- CASE Ingredients Features
- Product Highlights
- Enhances Chemical Resistance
- Provides Thermal Resistance
- Low Diluted Viscosity
- Rapid Cure
- Abrasion & Scratch Resistant
- Low Shrinkage
- Low Oxygen Inhibition
- Tin Free
Applications & Uses
- Applications
- Coating Type
- Recommended Application
- Hard, Protective Coatings
- Overprint Varnishes
- Printing Inks
Properties
- Uncured Properties
| Value | Units | Test Method / Conditions | |
| Refractive Index (20°C) | 1.510 | — | — |
| Density (25°C) | 1.15 | g/cm3 | — |
| Viscosity (25°C) | 50,000 | cP | — |
| Color | max. 50 | APHA | — |
Technical Details & Test Data
- Typical Formulations
Adhesion Properties Substrate I30 I50 TM50 TP50 H50 HE30 ABS XXX XXX XXX XXX XXX XXX Aluminum X X X Cold Rolled Steel
X XX XX XXX Glass X XXX HDPE PET XXX X XXX XXX XXX XXX PMMA X X XXX XXX XXX XXX Polycarbonate XXX XXX XXX XXX XXX X Polypropylene PVC XXX XXX XXX XXX XX Stainless Steel X X X X X Recommended XX Highly Recommended XXX Strongly Recommended
Typical Formulations Test Formulation Name 130 150 TM50 TP50 H50 HE30 BR-742M 70 50 50 50 50 70 IBOA 30 50 TMPTA 50 TPGDA 50 HDDA 50 HEMA 30 Omnirad 184 2 2 2 2 2 2 Viscosity, 25°C* 3,600 ‖ 3,400 700 300 1,400 * Brookfield – CAP 2000+ @ 25°C.
Cured Mechanical Properties Property I30 I50 TM50 TP50 H50 HE30 Tensile Strength, psi**
4,000 ‖ 3,200 3,600 2,600 2,000 Elongation, 6** 6.7 ‖ 1 5 2 17 Elastic Modulus, ksi*
160 ‖ 250 140 170 40 Durometer Hardness
84D ‖ 88D 82D 80D 810 Water Absorption, 96 (24 hrs)
0.19 ‖ 0 0.38 0.29 1 MEK Double Rubs (#)
>200 ‖ >200 >200 >200 >200 Tg(DMA)=54°C; Peak tan delta; cured with 2 phr of Omnirad® 184 ** Per ASTM D882 – Not Tested || Incompatible X Unable to Measure
- Viscosity Reduction with Reactive Diluents
Safety & Health
- General Information
This product is intended for industrial use only. Keep out of the reach of children. Avoid breathing vapors. Avoid contact with skin, eyes, and clothing. Wear impervious gloves. Repeated or continuous skin contact with uncured material may cause irritation. Remove material from skin with soap and water. Never use organic solvents to remove material from skin and eyes. For more information on the safe handling of this material, please refer to the Safety Data Sheet before use.