Products

Cutrite 2100 is a semi-synthetic fluid for light to moderate duty machining and grinding of ferrous and non-ferrous alloys. Cutrite 2100’s emulsifier system is designed to remain stable even in very hard water and yet properly balanced to minimize foam in softer water. Cutrite 2100 is a clean product that provides dependable rancidity control when used in machining centers with individual sumps.

Hercules EP 2 is an extreme pressure industrial gear oil fulfills the requirements of DIN 51517-3 for CLP type gear oils and U.S. Steel 224 performance. Hercules EP 2 offers good wear protection, safety against scuffing, aging resistance and a high thermal endurance. In addition, the product behave neutral towards conventional seals and bearing metals.

Vulgrind 7410 is a chlorine-free high performance grinding oil based on specially selected, thermally stable base oils. This allows Vulgrind 7410 to provide a consistent level of grinding performance as well as ensuring excellent wetting, lubrication and cooling.

Hercules EP 1 is an extreme pressure industrial gear oil fulfills the requirements of DIN 51517-3 for CLP type gear oils and U.S. Steel 224 performance. Hercules EP 1 offers good wear protection, safety against scuffing, aging resistance and a high thermal endurance. In addition, the product behave neutral towards conventional seals and bearing metals.

Orion 1025 is a high performance cutting and grinding fluid for ferrous alloys. This oil-rejecting fluid outperforms conventional coolants in difficult operations. Orion 1025 provides excellent bimetallic corrosion protection to keep parts and machine tools free from in-process rust. In hard or soft water, Orion 1025 forms a stable solution that will not foam. Orion 1025 is a clean fluid that runs with trouble-free dependability.

Honing Oil 8579 is a low viscosity neat cutting oil designed for honing and superfinishing of ferrous metals.

Vuldra 5580 is a water soluble drawing and stamping fluid based on natural and synthetic ester technology. It was designed to replace neat oils used to draw and stamp carbon and stainless steel alloys. The unique combination of boundary lubrication and non-chlorinated extreme pressure additives provides excellent surface finishes even in the most demanding operations. Vuldra 5580 is a clean product that is easily removed by both mildly alkaline and alkaline cleaners.

Hercules EP 8 is an extreme pressure industrial gear oil fulfills the requirements of DIN 51517-3 for CLP type gear oils and U.S. Steel 224 performance. Hercules EP 8 offers good wear protection, safety against scuffing, aging resistance and a high thermal endurance. In addition, the product behave neutral towards conventional seals and bearing metals.

Vuldra 8525 is a water soluble drawing and stamping fluid based on vegetable oil technology. It was designed to replace neat oils used to draw and stamp carbon and stainless steel alloys. The unique combination of boundary lubrication and non-chlorinated extreme pressure additives provides excellent surface finishes even in the most demanding operations. Vuldra 8525 is a clean product that is easily removed by both mildly alkaline and alkaline cleaners.

J-Cut 4560 is a high performance cutting oil designed for mist and spray lubricators. The non-chlorinated lubricants provide excellent surface finishes on even the most difficult metals without staining.

GHO-5555 is medium viscosity high performance shaving and hobbing oil. GHO-5555 contains an oiliness additive for additional performance, especially on draggy, soft metals. It is designed primarily for gear hobbing, form grinding, and gear cutting where pressurized coolant systems are used.

Hercules EP 4 is an extreme pressure industrial gear oil fulfills the requirements of DIN 51517-3 for CLP type gear oils and U.S. Steel 224 performance. Hercules EP 4 offers good wear protection, safety against scuffing, aging resistance and a high thermal endurance. In addition, the product behave neutral towards conventional seals and bearing metals.

Cutrite 3398 is a high performance micro emulsion metalworking fluid for machining and grinding of ferrous and non-ferrous alloys including cast aluminum, titanium and nickel-chromium alloys. It is ideally suited for manufacturing plants desiring a single fluid to perform well on a variety of metals and operations. The use of innovative technology allows Cutrite 3398 to provide excellent sump life while the reliable, low maintenance qualities make it an ideal choice for individual sumps and central systems applications.

Cutrite 3399 is a high performance micro-emulsion metalworking fluid for machining and grinding of ferrous and non-ferrous alloys. It is ideally suited for manufacturing plants desiring a single fluid to perform well on a variety of metals and operations. The use of innovative technology allows Cutrite 3399 to provide excellent sump life while the reliable, low maintenance make it an ideal choice for individual sumps and central systems applications.

Vuldra 516 is a heavy duty drawing and stamping fluid for ferrous and non-ferrous alloys. Vuldra 516 is also very effective in light to medium gage tube bending operations. The high viscosity base oils, in conjunction with non-chlorinated ep additives provide excellent surface finishes even in the most demanding operations. Vuldra 516 can be used neat or diluted with water.

Hercules EP 7 is an extreme pressure industrial gear oil fulfills the requirements of DIN 51517-3 for CLP type gear oils and U.S. Steel 224 performance. Hercules EP 7 offers good wear protection, safety against scuffing, aging resistance and a high thermal endurance. In addition, the product behave neutral towards conventional seals and bearing metals.

DuraSyn Grind is a chlorine-free, high performance grinding oil based on synthetic base oil. It provides a consistent level of grinding performance as well as ensuring excellent wetting, lubrication and cooling. DuraSyn Grind is highly effective for grinding tooling made from tungsten carbide, high speed steel, ceramics, CBN and other materials as wells as parts made from hardened steels, stainless steel and exotic metals with no surface cracking.

J-Cut NCL-20 is a heavy duty cutting oil developed to machine difficult metals without the need for chlorinated additives. The extreme pressure lubricants are balanced to provide ease of cut with minimal tool wear. An effective anti-mist additive is incorporated into the J-Cut NCL-20 to reduce misting of the cutting oil during high speed machining operations.

Cutrite 2650 is a semi-synthetic fluid for light to moderate duty machining and grinding of ferrous and non-ferrous alloys. Cutrite 2650’s emulsifier system is designed to remain stable even in very hard water and yet properly balanced to minimize foam in softer water. Cutrite 2650 is a clean product that provides dependable rancidity control when used in machining centers with individual sumps.

Hercules EP 3 is an extreme pressure industrial gear oil fulfills the requirements of DIN 51517-3 for CLP type gear oils and U.S. Steel 224 performance. Hercules EP 3 offers good wear protection, safety against scuffing, aging resistance and a high thermal endurance. In addition, the product behave neutral towards conventional seals and bearing metals.

Hercules EP 6 is an extreme pressure industrial gear oil fulfills the requirements of DIN 51517-3 for CLP type gear oils and U.S. Steel 224 performance. Hercules EP 6 offers good wear protection, safety against scuffing, aging resistance and a high thermal endurance. In addition, the product behave neutral towards conventional seals and bearing metals.

Cutrite 3900 is a micro emulsion fluid engineered for machining and grinding a wide variety of metals including cast iron, steel, stainless steel and most aluminum alloys. It is ideally suited for manufacturing plants desiring a single fluid to perform well on a variety of metals and operations. The use of innovative technology allows Cutrite 3900 to provide excellent sump life while the reliable, low maintenance qualities make it an ideal choice for individual sumps and central systems applications.

J-Cut 9187 was specifically developed for Swiss type high performance screw machines. The low viscosity of J-Cut 9187 allows it to effectively penetrate between the tool and work piece interface providing excellent surface finishes and tool life. This product is extremely high performance and is easily capable of performing gun drilling and form tapping on stainless as well as carbon steel.

J-Cut NCL-18 is a moderate to heavy duty dual purpose cutting oil developed to machine a wide variety of metals without the need for chlorinated additives. The extreme pressure lubricants are balanced to provide ease of cut with minimal tool wear. An effective anti-mist additive is incorporated into the J-Cut NCL-18 to reduce misting of the cutting oil during high speed machining operations.

Cutrite 6500 is a micro emulsion fluid engineered for machining and grinding cast iron, steel, stainless steel and cast aluminum. It is ideally suited for manufacturing plants desiring a single fluid to perform well on a variety of metals and operations. The use of innovative technology allows Cutrite 6500 to provide excellent sump life while the reliable, low maintenance qualities make it an ideal choice for individual sumps and central systems applications.

J-Cut 21 is a premium quality multi-purpose, non-staining product formulated with a chlorinated performance additive. J-Cut 21 also contains an oiliness additive for additional performance, especially on draggy, soft metals. It gives excellent performance on high speed heavy duty operations on most types of steels and non-ferrous metals. This product can also be used as gear oil, hydraulic oil, and general machine oil.

Hercules EP 8A is an extreme pressure industrial gear oil fulfills the requirements of DIN 51517-3 for CLP type gear oils and U.S. Steel 224 performance. Hercules EP 8A offers good wear protection, safety against scuffing, aging resistance and a high thermal endurance. In addition, the product behave neutral towards conventional seals and bearing metals.

J-CUT 450 is a heavily additized, high performance oil developed for use in difficult machining operations such as helical broaching. J-CUT 450 contains an oiliness additive for additional performance, especially on draggy, soft metals.

J-Cut 5542 was developed to meet the demands generated by high performance screw machines. J-Cut 5542 effectively penetrates the tool and work piece interface providing excellent surface finishes and tool life. This product is extremely high performance and is easily capable of performing gun drilling and form tapping on stainless and other difficult to machine alloys without the use of additional additives.

Cutrite 1113B is a semi-synthetic machining fluid used primarily for cutting and grinding of cast iron and low alloy steels. The versatility of the Cutrite 1113B allows it to be used for light to moderate duty applications by varying concentration. It machines clean and is suitable for both hard and soft waters. Its biogenic formulation provides outstanding sump life and remains mild to the skin.

Cutrite 3012H is formulated for light to moderate machining and grinding of ferrous metals including cast iron. Utilizing synthetic oils, it was engineered to impart maximum cooling and load carrying characteristics. Cutrite 3012H provides long lasting performance in both individual and central systems.

Hercules EP 5 is an extreme pressure industrial gear oil fulfills the requirements of DIN 51517-3 for CLP type gear oils and U.S. Steel 224 performance. Hercules EP 5 offers good wear protection, safety against scuffing, aging resistance and a high thermal endurance. In addition, the product behave neutral towards conventional seals and bearing metals.

Vuldra 6412 is a water soluble drawing and stamping fluid designed for use in a wide range of stamping and drawing applications including deep draws and light to heavy duty stamping and drawing operations. The unique combination of boundary lubrication and non-chlorinated extreme pressure additives provides excellent surface finishes even in the most demanding operations. Vuldra 6412 is a clean running product that is easily removed by both mildly alkaline and alkaline cleaners.

Vuldra 4915 is a heavy duty oil formulated for extrusion, deep drawing, fine blanking and difficult stamping operations on stainless steel, low carbon steel and exotic alloys. Parts are left clean with no varnishing even under high heat operations.

J-Cut MO-250-EP is a heavy duty lubricant formulated for the machining and sawing of ferrous and some non-ferrous metals. The high film strength of J-Cut MO-250-EP in conjunction with non-chlorinated extreme pressure additives, provides excellent performance on difficult to machine alloys such as stainless steel and exotic alloys. Based on renewable resources, J-Cut MO-250-EP is biodegradable and essentially non-toxic.

J-Cut 55 QT is a heavy duty dark cutting oil developed for difficult machining operations such as deep hole boring, gun drilling and trepanning. Extensive field experience has shown that J-Cut 55 QT gives exceptional production rates and extended tool life. The viscosity is designed to give maximum lubrication combined with the proper cooling and flushing of chips. J-Cut 55 QT does contain active sulfur and should not be used on non-ferrous metals because of staining.