Products

Poseidon 32 is a of rust and oxidation inhibited oils formulated with highly refined paraffinic base oils. It provides excellent oxidation and corrosion inhibition as well as foam and aeration suppression. It has excellent demulsibility characteristics.

J-Cut 5542 was developed to meet the demands generated by high performance screw machines. J-Cut 5542 effectively penetrates the tool and work piece interface providing excellent surface finishes and tool life. This product is extremely high performance and is easily capable of performing gun drilling and form tapping on stainless and other difficult to machine alloys without the use of additional additives.

Hercules EP 0 is an extreme pressure industrial gear oil fulfills the requirements of DIN 51517-3 for CLP type gear oils and U.S. Steel 224 performance. Hercules EP 0 offers good wear protection, safety against scuffing, aging resistance and a high thermal endurance. In addition, the product behave neutral towards conventional seals and bearing metals.

J-Cut MO-250-EP is a heavy duty lubricant formulated for the machining and sawing of ferrous and some non-ferrous metals. The high film strength of J-Cut MO-250-EP in conjunction with non-chlorinated extreme pressure additives, provides excellent performance on difficult to machine alloys such as stainless steel and exotic alloys. Based on renewable resources, J-Cut MO-250-EP is biodegradable and essentially non-toxic.

Athena 22 is a anti-wear hydraulic oils formulated with highly refined paraffinic base oils. It provides excellent anti-wear protection, oxidation and corrosion inhibition as well as foam and aeration suppression. It have excellent demulsibility characteristics.

Oxynul RP-710 is a general purpose solvent corrosion preventative with excellent dewatering properties. After evaporation, the solvent leaves and ultra-thin greasy protective film that provides excellent protection properties for medium to long-term storage.

Orion 1533G is an effective rust inhibited coolant formulated use in laser cutting and pressure testing equipment as well as general grinding applications. Orion 1533G forms a stable solution that will not foam. Orion 1533G a clean fluid that runs with trouble-free dependability.

Orion 7126 is a moderate pH fluid developed for the machining of low and high alloy steels, aluminum alloys, Inconel, hastelloy, and titanium. The unique proprietary lubricants in Orion 7126 were designed for high speeds and feed rates and provides extremely high lubricity in a variety of aluminum machining operations. This oil-rejecting fluid outperforms conventional coolants in difficult operations such as tapping and gun drilling. Orion 7126 provides excellent bimetallic corrosion protection to keep parts and machine tools free from in-process rust. In hard or soft water, Orion 7126 forms a stable solution that will not foam. Orion 7126 is a clean fluid that runs with trouble-free dependability.

Olympus 150 is a anti-wear hydraulic oils formulated with polyalphaolephin synthetic oils. It provides excellent anti-wear protection, oxidation and corrosion inhibition as well as foam and aeration suppression. It has excellent demulsibility characteristics. It is formulated to provide outstanding low- and high-temperature performance and equipment protection up to three times longer than comparable conventional products.

Citriclean is a D’limonene based cleaner developed to remove grease, oil and dirt deposits from metal parts. It leaves a clean surface with virtually no residue. Citriclean is compatible with all metals including aluminum, copper, stainless steel, brass, mild steel (1010, 1008) and silicone steel alloys.

Cutrite 6500 is a micro emulsion fluid engineered for machining and grinding cast iron, steel, stainless steel and cast aluminum. It is ideally suited for manufacturing plants desiring a single fluid to perform well on a variety of metals and operations. The use of innovative technology allows Cutrite 6500 to provide excellent sump life while the reliable, low maintenance qualities make it an ideal choice for individual sumps and central systems applications.

Cutrite 3012H is formulated for light to moderate machining and grinding of ferrous metals including cast iron. Utilizing synthetic oils, it was engineered to impart maximum cooling and load carrying characteristics. Cutrite 3012H provides long lasting performance in both individual and central systems.

Poseidon 460 is a of rust and oxidation inhibited oils formulated with highly refined paraffinic base oils. It provides excellent oxidation and corrosion inhibition as well as foam and aeration suppression. It has excellent demulsibility characteristics.

J-Cut NCL-18 is a moderate to heavy duty dual purpose cutting oil developed to machine a wide variety of metals without the need for chlorinated additives. The extreme pressure lubricants are balanced to provide ease of cut with minimal tool wear. An effective anti-mist additive is incorporated into the J-Cut NCL-18 to reduce misting of the cutting oil during high speed machining operations.

FBO 67LG is a heavy duty oil developed for fine blanking heavy gage steel and stainless steel alloys. The combination of boundary lubrication and extreme pressure additives extends die life and provides excellent surface finishes even in the most demanding operations. The low density of FBO 67LG allows it to work well with oil/water separators that are connected washer systems. The product is easily removed with alkaline and mildly alkaline cleaners

Synthetic EP 320 of synthetic industrial EP gear lubricants is specifically formulated to protect moderate to heavily loaded industrial gears and bearings. It provide excellent anti-wear and load carrying capability as well as strong rust inhibition and demulsibility performance. Synthetic EP 320 meets or exceeds the requirements of the industry standard U.S. Steel 224 and AGMA 250.04 EP gear lubricant specifications.

Pandora 5, formulated from select high-quality, low viscosity base oils and additives imparting excellent resistance to oxidation and corrosion, were developed specifically for the lubrication of high-speed and precision machine tool spindle bearings. They can also be used in some critical low pressure hydraulic and circulation systems where the appropriate viscosity grade is selected.

Vulgrind 7810B is a high performance precision grinding oil based on specially selected, thermally stable base oils. This allows Vulgrind 7810B to provide a consistent level of grinding performance as well as guaranteeing excellent wetting, lubrication and cooling.

FRH-200 is formulated with diethylene glycol and is designed to provide optimum performance in hydraulic systems where fire resistant fluids are required. Fortified with state-of-the-art additives, FRH-200 delivers improved lubricity, shear stability, excellent corrosion protection, and the overall performance demanded by today’s high-performance hydraulic systems. FRH-200 meets the fire resistance performance requirements of Factory Mutual.

Orion 1065 is our premier synthetic cutting and grinding fluid for ferrous alloys. The unique proprietary lubricants in Orion 1065 were designed for high speeds and feed rates and provides extremely high lubricity in a variety of ferrous machining operations. This oil-rejecting fluid outperforms conventional coolants in difficult operations such as gear hobbing and gun drilling. Orion 1065 provides excellent bimetallic corrosion protection to keep parts and machine tools free from in-process rust. In hard or soft water, Orion 1065 forms a stable solution that will not foam. Orion 1065 is a clean fluid that runs with trouble-free dependability.

Stearocling 300S Oils is formulated for the sliding ways of machine tools. It is formulated with high viscosity index base stocks combined with special extreme pressure friction modifiers that yield extremely low values in Cincinnati Milacron’s stick-slip test. As a result these oils are more stable to viscosity fluctuations and are able to overcome the slip-stick commonly associated with slow moving parts. Stearocling Way Oils also contain a package that eliminates the possibility of contamination through emulsification between the coolant and the way lube.

J-Cut MO-240-EP is a heavy duty lubricant formulated for the machining and sawing of ferrous and non-ferrous metals. The high film strength of J-Cut MO-240-EP in conjunction with non-chlorinated extreme pressure additives, provides excellent performance on difficult to machine alloys such as stainless steel and exotic alloys. Based on renewable resources, J-Cut MO-240-EP is biodegradable and essentially non-toxic.

Olympus 68 is a anti-wear hydraulic oils formulated with polyalphaolephin synthetic oils. It provides excellent anti-wear protection, oxidation and corrosion inhibition as well as foam and aeration suppression. It has excellent demulsibility characteristics. It is formulated to provide outstanding low- and high-temperature performance and equipment protection up to three times longer than comparable conventional products.

Stearocling 1000S Oils is formulated for the sliding ways of machine tools. It is formulated with high viscosity index base stocks combined with special extreme pressure friction modifiers that yield extremely low values in Cincinnati Milacron’s stick-slip test. As a result these oils are more stable to viscosity fluctuations and are able to overcome the slip-stick commonly associated with slow moving parts. Stearocling Way Oils also contain a package that eliminates the possibility of contamination through emulsification between the coolant and the way lube.

J-Cut 55 QT is a heavy duty dark cutting oil developed for difficult machining operations such as deep hole boring, gun drilling and trepanning. Extensive field experience has shown that J-Cut 55 QT gives exceptional production rates and extended tool life. The viscosity is designed to give maximum lubrication combined with the proper cooling and flushing of chips. J-Cut 55 QT does contain active sulfur and should not be used on non-ferrous metals because of staining.

Oxynul RP-5598 is a solvent-dispersed corrosion preventive. Oxynul RP-5598 displaces free standing water, and alkaline cleaners with a protective film that provides up to twelve months indoor protection. The thin, slightly greasy film suppresses fingerprints as well.

Poseidon 68 is a of rust and oxidation inhibited oils formulated with highly refined paraffinic base oils. It provides excellent oxidation and corrosion inhibition as well as foam and aeration suppression. It has excellent demulsibility characteristics.

Cutrite 3398 is a high performance micro emulsion metalworking fluid for machining and grinding of ferrous and non-ferrous alloys including cast aluminum, titanium and nickel-chromium alloys. It is ideally suited for manufacturing plants desiring a single fluid to perform well on a variety of metals and operations. The use of innovative technology allows Cutrite 3398 to provide excellent sump life while the reliable, low maintenance qualities make it an ideal choice for individual sumps and central systems applications.

Cutrite 3399 is a high performance micro-emulsion metalworking fluid for machining and grinding of ferrous and non-ferrous alloys. It is ideally suited for manufacturing plants desiring a single fluid to perform well on a variety of metals and operations. The use of innovative technology allows Cutrite 3399 to provide excellent sump life while the reliable, low maintenance make it an ideal choice for individual sumps and central systems applications.

Vulclean FC-5111 is an economical, low alkalinity, general maintenance cleaner specially designed without using strong alkalies, phosphates or objectionable solvents. Vulclean FC-5111 is recommended for use in mechanical floor scrubbing, hand wipe, steam gun, and pressure washer applications.

Oxynul RP-5722 is a general purpose solvent corrosion preventative with excellent dewatering properties. After evaporation, the solvent leaves and ultra-thin greasy protective film that provides excellent protection properties for medium to long-term storage.

Cutrite 1113B is a semi-synthetic machining fluid used primarily for cutting and grinding of cast iron and low alloy steels. The versatility of the Cutrite 1113B allows it to be used for light to moderate duty applications by varying concentration. It machines clean and is suitable for both hard and soft waters. Its biogenic formulation provides outstanding sump life and remains mild to the skin.

Vulclean SP-2050 is a mild alkaline, liquid cleaner, designed for the removal of shop soils, lubes, oils, coolants and chips from ferrous surfaces. It may also be used for tumbling operations. Vulclean SP-2050 contains anti-oxidants that provide excellent anti pitting and corrosion protection.

J-Cut 21 is a premium quality multi-purpose, non-staining product formulated with a chlorinated performance additive. J-Cut 21 also contains an oiliness additive for additional performance, especially on draggy, soft metals. It gives excellent performance on high speed heavy duty operations on most types of steels and non-ferrous metals. This product can also be used as gear oil, hydraulic oil, and general machine oil.

Vuldra 6412 is a water soluble drawing and stamping fluid designed for use in a wide range of stamping and drawing applications including deep draws and light to heavy duty stamping and drawing operations. The unique combination of boundary lubrication and non-chlorinated extreme pressure additives provides excellent surface finishes even in the most demanding operations. Vuldra 6412 is a clean running product that is easily removed by both mildly alkaline and alkaline cleaners.

Vulclean RP-13632 is a moderately alkaline cleaner and corrosion inhibitor engineered to remove shop soils, oils, and coolants from ferrous alloys. Parts cleaned with Vulclean RP-13632 exhibit excellent corrosion protection for indoor storage and covered transport.