company tower banner
Creative Materials Inc. Company Logo

Creative Materials 102-32NFC

102-32NFC is a flexible electrically conductive silicone adhesive. 102-32NFC features the highest degree of thermal and mechanical reliability over any other conductive adhesive technology and provides no failures during thermal cycling, heat aging, shocking or vibration due to the reliability from the elasticity of the product. Some applications for 102-32NFC include, but are not limited to, elastomeric conductive bridging and bonding, conductive bonding of low surface energy materials, conductive via filling and electrical attachments for stress sensitive devices. 102-32NFC is one of the few conductive adhesives that can bond to silicone substrates and surfaces. 102-32NFC is a non-flammable version of 102-32.

Features

  • High temperature
  • Flexible silicone adhesive
  • Non-flammable.

Product Type: Conductive Adhesive

Application Area: Electrical Components

Application Method: Injection

Chemical Family: Silicones

Technical Data Sheet
  • TypeDocument Name
View All Documents

Knowde Enhanced TDS

Identification & Functionality

Chemical Family

Features & Benefits

Labeling Claims

Applications & Uses

Application Area
Application Method

Properties

Typical Properties
ValueUnitsTest Method / Conditions
Pot LifeLatent
Conductivity0.0001
Typical Cured Properties
ValueUnitsTest Method / Conditions
Viscosity30000cps
FillerSilver
Percent Silver (cured)min. 78
Volume Resistancemax. 0.0001Ω-cm
Thermal Conductivity5.4W/m-K
Young's Modulus1700MPa
Tensile Strength5Mpa
Hardness55Shore A
Rear Strength12500N/m
Useful Temperature Range-70 to 260ºC
Thermal StabilityGood to 325°C

Regulatory & Compliance

Certifications & Compliance

Safety & Health

Safety & Handling
  • Use with adequate ventilation.
  • Keep away from sparks and open flames.
  • Avoid prolonged contact with skin and breathing of vapors.
  • Wash with soap and water to remove from skin.

Storage & Handling

Shelf Life
6 months at 5°C, 12 months at -20°C, 2 weeks at 25°C
Suggested Handling

Before using 102-32NFC should be stirred gently to ensure homogeneity. Further thinning may be accomplished by adding small amounts of toluene, xylene, or 127-05.

Suggested Bonding & Curing

Apply thin film of adhesive to both surfaces to be bonded. Good properties are achieved when cured for 60 minutes at 150°C but end user is advised to experimentally determine temperature and time best suited for individual applications. 102-32NFC is not recommended for applications that cannot cure above 100°C. End user is advised to experimentally determine temperature and time best suited for individual applications.

Storage

Shelf life: up to 2 weeks at 25°C; or 6 months at 5°C; or 12 months at -20°C. See syringe handling guidelines for recommendations on storage and maintaining homogeneity of material over long-term storage. *102-32NFC packaged in syringes must be kept frozen at -40°C