Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Technologies
- Product Families
Features & Benefits
- Ready-to-Use Product Features
Applications & Uses
- Applications
- Application Area
- Application Method
- Cure Method
- Application Method
- Syringe dispense
Properties
- Appearance
- Silver
- Typical Properties
- Component B
- Typical Cured Properties
Value | Units | Test Method / Conditions | |
Conductivity | 3.78 | ohms/sq/mil | — |
Viscosity: (CP-51 2.5 RPM, 25°C) | 30 - 40k | cps | — |
Pot Life | max. 4 days | — | — |
Value | Units | Test Method / Conditions | |
Mix Ratio (by weight) | 1 | — | — |
Value | Units | Test Method / Conditions | |
Volume Resistivity | max. 0.01 | Ω-cm | — |
Thermal Conductivity | min. 6.5 | W/m-K | — |
Glass Transition Temperature (Tg) | 120 | °C | — |
Die Shear Strength | min. 30 | Newtons | — |
Solvent Resistance | Excellent | — | — |
Specific Gravity | 3.49 | g/cc | — |
Useful Temperature Range | -55 to 200 | ºC | — |
Thermal Stability | Good to 300 | °C | — |
Regulatory & Compliance
- Certifications & Compliance
Technical Details & Test Data
- Mixing Ratio
Premix each part in their original containers prior to combining. Add Part B to Part A and mix until uniform.
Safety & Health
- Safety & Handling
- Use with adequate ventilation.
- Keep away from sparks and open flames.
- Avoid prolonged contact with skin and breathing of vapors.
- Wash with soap and water to remove from skin.
Storage & Handling
- Shelf Life
- 12 months at 25°C
- Curing Instructions
Best results are obtained when product is cured at one of the following schedules:
90 mins @ 85°C 15 mins @ 120°C 5 mins @ 150°C 45 secs @ 175°C