Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- CASE Ingredients Functions
- Industrial Additives Functions
Features & Benefits
- CASE Ingredients Features
- Industrial Additives Features
- Product Properties
AFCONA-4010 is a polymeric dispersant principally developed for stabilizing inorganic pigments such as TiO2, iron oxides, and matting agents. It can be used in almost all solvent - based coating systems, because AFCONA – 4010 has very good compatibility with almost all resins used in coatings.
The special properties and recommended systems for AFCONA – 4010 include:
- AFCONA – 4010 is a very good dispersant for TiO2 as it offers improved whiteness and hiding power.
- AFCONA – 4010 is widely used in the preparation of matting agent pastes. It gives better matting agent orientation, constant gloss level after storage and a soft feel matting appearance. A suggested formulation of matting agent paste is as follows:
- Resin (50-60% solid) 30 – 35%
- Matting agent 20 – 30%
- AFCONA 4010 4 – 6%
Solvents combination remainder
- AFCONA – 4010 may be used as a co-grinding dispersant in mill bases. It also can be post-added for the correction of flooding and floating effects.
- AFCONA – 4010 is most often used as a dispersant for inorganic pigments and some organic pigments. It is always possible to combine pigments stabilized with AFCONA-4010 together with organic pigments stabilized with higher molecular weight dispersants.
Note: AFCONA – 4010 will become slightly hazy at temperatures of 5°C and below, but this will not influence the performance of the product.
Applications & Uses
- Applications
- Compatible Polymers & Resins
- Compatible Substrates & Surfaces
- Cure Method
- Industrial Additives End Use
- Application Details
Addition and dosage: Add AFCONA-4010 according to the dosages listed below, which should be calculated based on the weight of pigment in the formula:
- Titanium dioxide : 2 - 4% (as supplied)
- Inorganic pigments : 5 - 10% (as supplied)
- Organic pigments : 20 - 40% (as supplied)
- Carbon blacks : 30 - 60% (as supplied)
Incorporation: AFCONA-4010 should be incorporated in the mill base before adding pigments.
Properties
- Appearance
- Clear to slight hazy, yellow liquid
- Specifications
Value | Units | Test Method / Conditions | |
Active Ingredients Content | 50 - 54 | % | — |
Solvents | Butylacetate / Methoxy Propyl Acetate/ Alkylbenzene / sec-Butanol | — | — |
Density (at 20°C) | 0.96 - 1.00 | g/cm³ | — |
Amine Value | 6 - 16 | mg KOH/g | — |
Acid Value | 8 - 18 | mg KOH/g | — |
Flash Point | 24.0 | °C | — |
Color | max.6 | — | — |
Packaging & Availability
- Regional Availability
- Packaging Information
55 lb and 419 lb non-returnable containers
Storage & Handling
- Shelf Life
- 5 years
- Storage Information
AFCONA-4010 should be stored in a cool, dry place. When kept in its original, unopened container, it will keep up to 5 years from the date of manufacture. The expiration date is indicated on the container.