Knowde Enhanced TDS
Identification & Functionality
- CASE Ingredients Functions
- Fluids & Lubricants Functions
- Industrial Additives Functions
Features & Benefits
- CASE Ingredients Features
- Industrial Additives Features
- Key Features
Pangel B10 is a rheological thickener recommended to provide strongly pseudoplastic characters, suspension and sagging- resistance properties to systems based on White Spirit type solvents and with a high solids content. In these low-to- intermediate polarity systems, Pangel B10 does not require the use of a polar activator for its dispersion. Use of Pangel B10 has the following advantages against other conventional additives:
- Coatings and paints: Prevents settling of pigments and fillers; controls sagging without aggravating leveling; transportation and storage.
- Printing inks: Improves consistency and prevents settling of pigments.
- Drilling mud: Increased dispersibility and stability at high temperatures; high thickening and suspension capacity.
- Asphalt coatings: Sagging control; improves dispersion and prevents settling of fillers; improves plastic behavior at extreme temperatures; slows aging, simplifies application and high stability during improves finish.
Applications & Uses
- Applications
- Applicable Processes
- Compatible Polymers & Resins
- Compatible Substrates & Surfaces
- Fluids & Lubricants Type
- Coating Type
- Fluids & Lubricants End Use
- Fields of Application
- Coatings and paints: Decorative enamels, alkyds, coatings for lower part of car, signaling, marine coatings, automobile priming, oven-cured enamels.
- Printing inks: Naphthenic and aromatic oils, vegetable oil, newspaper black ink, heat-set.
- Drilling mud: In mineral oils, in polyalphaolefins.
- Greases: In mineral oils.
- Sealants and joints: Rubber.
- Asphalt coatings
- Others: Putties, rubber, get-coat, emulsions.
To obtain a good dispersion:
Coatings and Paints 0.2% - 1.0% Inks 0.5% - 3.0% Drilling mud 1.0% - 2.0% Asphalt coatings 2.0% - 5.0%
Properties
- Dispersion Properties
- Physico-Chemical Properties
- Note
* - Suspension at 10% in White Spirit (Solvaran 600) solvent at high shear (18 m/s)
Value | Units | Test Method / Conditions | |
Asphalt Coatings | 2.0 - 5.0 | % | — |
Coatings and Paints | 0.2 - 1.0 | % | — |
Drilling Mud | 1.0 - 2.0 | % | — |
Inks | 0.5 - 3.0 | % | — |
Value | Units | Test Method / Conditions | |
Brookfield Viscosity (at 5 rpm)* | 147.00 | mPa.s | — |
Bulk Density | 238.0 | g/l | — |
Dry Sieving (retained in 75 micras mesh) | O.53 | % | — |
Moisture Content | 11.35 | % | — |
Packaging & Availability
- Regional Availability
- Packaging
- Sacks containing 15 kg
Storage & Handling
- Shelf Life
- 1 Year
- Storage Condition
Dry location, protected from humidity