Products

Pangel B42 is an organically modified sepiolite powdered additive with a high thickening and anti-settling capacity for high polarity systems, particularly recommended for systems based on alcohol, glycol and ketone type solvents, as well as in mixtures of those with water.

Pangel B40 is a powdered additive with a high thickening and anti-settling capacity for high-polarity systems. It is especially recommended for adding thixotropic, suspension, and sagging resistance properties to systems based on alcohol, glycol, and ketone solvents, as well as mixtures of those solvents with water.

Pangel OM8 is a rheological additive for low- to medium-polarity systems based upon highly purified bentonite clay. It is particularly recommended for systems based on resins such as polyurethanes, acrylics, polyesters, epoxy esters, and alkyds. Pangel OMD8 is an organobentonite that enhances thixotropic and pseudoplastic effects in systems with intermediate polarity.

Syntran® 1950C is based on Interpolymer Corporation's unique styrenated acrylic technology. This technology creates a film with a very high gloss and fast dry times. This technology also allows for excellent adhesion over multiple substrate types. This milky dispersion is used in floor finishes, household, label, board, and packaging coatings (OPV).

Syntran® PA-1475 is based on a patented acrylic-olefin graft technology. This unique incorporation of olefin onto the backbone of the acrylic increases the wear resistance and stability of the formulation without sacrificing the burnishability of the wax when used in a floor finish.

Syntran® 3211 is based on shell-core technology. This technology creates a film with very high gloss, block resistance, rub resistance, and printability with multiple ink types. This technology also allows for excellent adhesion over multiple substrate types. This milky dispersion is used in label, board, and packaging coatings (OPV).

Syntran® PA-1465 is based on a patented acrylic-olefin graft technology. This unique incorporation of olefin onto the backbone of the acrylic increases the wear resistance and stability of the formulation without sacrificing the burnishability of the wax when used in a floor finish.

Syntran® OP 1133 is based on Interpolymer Corporation's "opaque polymer" technology, which can be used to replace a percentage of the titanium dioxide used in white paints while maintaining the same or similar coverage. The ideal reduction level of titanium dioxide is approximately 15% when using this technology. Higher reductions of titanium dioxide levels can be achieved, but you may experience a slight loss in the coverage of the paint.

Syntran® 6209 is based on high-solids technology. This technology creates a film with very high flexibility, excellent water resistance, and excellent coverage. This technology also allows for excellent adhesion over multiple substrate types. This white emulsion is used in adhesives, textile and leather coatings, pigmented coatings and sealants, label, board, and packaging coatings (OPV).

Lo-Vel® 6200 belongs to PPG's synthetic precipitated silica product line, which reduces the gloss of coatings, varnishes, and other finishes. It offers high flatting efficiency, compatibility with various coating systems, and ease of redispersion. This product line delivers a balance of clarity and flatting for overprint varnish and topcoats. It can be used in solvent- or water-based coatings, high-solids, 100%-solids, and 2K systems, making it a versatile solution for a wide range of applications.

Hi-Sil® T-700 is a thickening agent that belongs to PPG's Hi-Sil® product line of synthetic, amorphous, precipitated silicas that are rheology modifiers and anti-sag/suspension agents. Hi-Sil® T-700 is a premium grade thixotrope designed specifically for adhesive and sealant applications. Its unique physical characteristics make Hi-Sil® T-700 thickening agent a more efficient and cost-effective alternative to fumed silica in certain applications.

ASCOTRAN® H30 is a ready-to-use, liquid-form flash rust inhibitor for waterborne coatings. It serves as a corrosion inhibitor for metal packaging protection, providing effective protection against flash rusting. This product can be used for waterborne neutral or alkaline paints or coatings and for industrial, professional, and do-it-yourself applications.

Synprint AC 5151 is an acrylic polymer based on multiphase technology. This is a proprietary process that combines two different types of polymers in the same polymer network. It allows a balanced combination and an overall improvement of the physical properties of the two polymers. Synprint AC 5151 forms a film with very high gloss, blocking resistance, rub resistance, and printability with various types of inks. It also exhibits excellent adhesion to various substrates.

Syntran® DR 7055 is an alkali-soluble acrylic polymer that is based on Interpolymer Corporation's polymeric surfactant technology. This technology was designed to improve wetting and incorporation of pigments or additives into water-based inks, pigment concentrates, and coatings. This product is used for wood coatings, concrete coatings, architectural coatings, etc.

Lo-Vel® HSF belongs to PPG's synthetic precipitated silica product line, which reduces the gloss of coatings, varnishes, and other finishes. It offers high flatting efficiency, compatibility with various coating systems, and ease of redispersion. This product line delivers a balance of clarity and flatting for overprint varnish and topcoats. It can be used in solvent- or water-based coatings, high-solids, 100%-solids, and 2K systems, making it a versatile solution for a wide range of applications.

Pergopak® M3 is a matting agent used in the paint and varnish industries. It has a low impact on rheology and improved scratch and abrasion resistance, along with improved adhesion and elasticity. On the other hand, Pergopak® M3 provides excellent weather resistance and gloss retention.

Dar-Tech Hauthane HD-4669 is a hard, co-solvent-free, aliphatic, aqueous polyurethane dispersion. It was designed for topcoat applications on a wide variety of substrates, including concrete, metal, plastic, and wood. This grade can be used as a sole vehicle or blended with acrylic emulsions for spray, dip, or rotogravure applications. It may be thickened with associative thickeners for alternative application methods.

Synprint AC 7150 is a water-based, alkali-solubilized styrene-acrylic copolymer used as an alkali-soluble resin in inks and overprint varnishes to improve gloss and leveling. It can also be used in pigment dispersions to improve color development and pigment dispersion gloss.

Dar-Tech Hauthane HD-2602 is an aliphatic, silicone-modified, polyester-based, waterborne polyurethane dispersion. It was designed primarily for topcoat applications where slip resistance and abrasion resistance are required. HD-2602 contains a non-fugitive silicone component that provides low surface tension characteristics on flexible and rigid substrates, including plastics, metals, and textiles.

Dar-Tech Hauthane L-3615 is a Dar-Tech Hauthane polyurethane dispersion that provides tough, chemically resistant, glossy coatings. The product has excellent flexibility and gloss retention characteristics. It may be applied to a variety of substrates, including concrete, metals, plastics, and wood materials. It is mainly used in architectural coatings, DIY brush varnishes, and wood furniture.

Hi-Sil® T-152 is a thickening agent that belongs to PPG's Hi-Sil® product line of synthetic, amorphous, precipitated silicas that are rheology modifiers and anti-sag/suspension agents. Hi-Sil® T-152 is a premium-grade thixotrope designed specifically for adhesive and sealant applications. Its unique physical characteristics make Hi-Sil® T-152 thickening agent a more efficient and cost-effective alternative to fumed silica in certain applications.

ASCOTRAN® H14 is a ready-to-use, liquid-form, anti flash-rust additive for waterborne coatings. It functions as a hydrophobic agent, providing protection for the almost dry film in severe ambient humidity conditions. Additionally, it serves as a corrosion inhibitor for metal packaging protection.

Pergopak® M5 is a matting agent used in the paint and varnish industries. It has a low impact on rheology and improved scratch and abrasion resistance, along with improved adhesion and elasticity. On the other hand, Pergopak® M5 provides excellent weather resistance and gloss retention.

Dar-Tech Hauthane HD-2107 DMM is a hard, NMP-free, APEO-free, aliphatic, polyester-based, aqueous polyurethane dispersion with an exceptional balance of properties. This product is a balance of toughness, abrasion resistance, and mar resistance, designed for topcoat applications on a wide variety of substrates, including concrete, metal, plastic, and wood.

ASCOTRAN® HPB is a ready-to-use, liquid-form flash rust inhibitor for waterborne coatings. It serves as a corrosion inhibitor for metal packaging protection, providing effective protection against flash rusting. This product can be used for waterborne neutral or alkaline paints or coatings and for professional and do-it-yourself applications.

Synprint AC 2910 is an inherently matte acrylic polymer. This technology produces a film with low gloss without the additional use of waxes or powders and brings flexibility and excellent stability while providing excellent adhesion to various substrate types. It is recommended to be fortified with another resin, such as Synprint AC 5151 or similar, to improve the overall film properties.

Syntran® DR 7015 is an alkali-soluble acrylic polymer that is based on Interpolymer Corporation's polymeric surfactant technology. This technology was designed to improve wetting and incorporation of pigments or additives into water-based inks and coatings. This product is used for wood coatings, concrete coatings, architectural coatings, etc.

Pergopak® M6 is a matting agent used in the paint and varnish industries. It has a low impact on rheology and improved scratch and abrasion resistance, along with improved adhesion and elasticity. On the other hand, Pergopak® M6 provides excellent weather resistance and gloss retention.

Lo-Vel® 27 belongs to PPG's synthetic precipitated silica product line, which reduces the gloss of coatings, varnishes, and other finishes. It offers high flatting efficiency, compatibility with various coating systems, and ease of redispersion. This product line delivers a balance of clarity and flatting for overprint varnish and topcoats. It can be used in solvent- or water-based coatings, high-solids, 100%-solids, and 2K systems, making it a versatile solution for a wide range of applications.

ASCOTRAN® H18 is a ready-to-use, liquid-form, flash rust inhibitor for waterborne coatings. It serves as a corrosion inhibitor for metal packaging protection, providing effective protection against flash rusting. This product can be used for waterborne neutral or alkaline paints or coatings and for industrial, professional, and do-it-yourself applications.

Pergopak® M4 is a matting agent used in the paint and varnish industries. It has a low impact on rheology and improved scratch and abrasion resistance, along with improved adhesion and elasticity. On the other hand, Pergopak® M4 provides excellent weather resistance and gloss retention.

Dar-Tech Hauthane HD-2139 is an aliphatic, polyester-based, aqueous urethane dispersion specifically developed for factory-coated PVC flooring. It was developed as a high-gloss, no-wax topcoat for expanded PVC flooring. Can be factory applied as a fused coating during PVC expansion. HD-2139 is ideally suited for PVC roll or sheet goods requiring a 180-degree reverse bend.

Lo-Vel® 66 belongs to PPG's synthetic precipitated silica product line, which reduces the gloss of coatings, varnishes, and other finishes. It offers high flatting efficiency, compatibility with various coating systems, and ease of redispersion. This product line delivers a balance of clarity and flatting for overprint varnish and topcoats. It can be used in solvent- or water-based coatings, high-solids, 100%-solids, and 2K systems, making it a versatile solution for a wide range of applications.

Dar-Tech Hauthane HD-2209 is an aliphatic, polyester-based, aqueous polyurethane dispersion designed to produce unequaled clarity and gloss. It was designed for wood finishing applications, but it can be used on a wide variety of both rigid and flexible substrates. Use wherever a high level of gloss and clarity is required.

Pangel OMD1 is a self-dispersing rheological additive for medium- to low-polarity systems. It is based on a highly purified bentonite clay and is recommended for both aliphatic solvents and mineral or synthetic oils. This product is an easy-to-disperse, self-activated organobentonite.

Pangel B20 is a powdered additive with a high thickening and anti-settling capacity for intermediate polarity systems, particularly recommended for systems based on aromatic and unsaturated polyester type solvents. It provides thixotropic, suspension and sagging-resistance properties to systems based on aromatic and unsaturated polyester type solvents, Pangel B20 does not require the use of a polar activator for its dispersion.