Products

JetFil® M550 is a high-purity, platy, ultra-fine talc, which is recommended for improving stiffness, HDT, and dimensional stability in polymers. It can be used in polyethylene, polypropylene, and PVC-based applications to achieve maximum stiffness at loading levels up to 40% or higher. JetFil® M550 is available in densified form to improve feeding, enhance extrusion throughput, and reduce dusting.

Nicron® 660 is an off-white, platy, high-purity, very fine talc, which is primarily used in paints and coatings. Nicron® 660 has excellent flatting characteristics, superior anti-settling properties, and is the product of choice in gel-coats. Nicron® 660 is used in rubber, wire, cable, and plastic applications.

Cimpact® 699 is an off-white, high-purity, platy, ultrafine talc with excellent top-size control. It is recommended for efficient crystal nucleation, as well as very good stiffness, HDT, dimensional stability, improved impact strength, and esthetics in high-performance plastics and plastic films.

Portaflame® SG10 S8 is a silane-treated grade made from carefully chosen synthetic aluminum hydroxide (ATH). The standardized quality of Portaflame® SG10 S8 is guaranteed by means of an ISO 9001-certified quality management plan. The chemical composition of the raw material and the finished product is closely monitored, and the particle size is kept within a narrow variation.

JetFil® H390 is an off-white talc recommended for improving stiffness, HDT, and dimensional stability in polymer applications. It is used in polypropylene applications to achieve maximum stiffness at loading levels as high as 20%, 40%, or higher. It is commonly used in wood-plastic composites (WPC).

Nicron® 665 is an off-white, high-purity, platy, ultrafine talc. It is a highly effective gloss control additive in paints and coatings. Nicron® 665 could be used in performance plastics and plastic films for excellent nucleation and very good stiffness, HDT, dimensional stability, and esthetics.

Nicron® 504 is a high-purity microcrystalline talc. The platy nature of Nicron® 504 enhances film strength and flexibility and provides barrier properties in architectural and industrial primers and topcoats to improve corrosion resistance and stain-blocking ability. Nicron® 504 is also used in paints to improve sag resistance and maximize prime pigment extension.

Nicron® 604 is a high-purity microcrystalline talc. The lamellar nature of Nicron® 604 enhances film strength and flexibility and provides barrier properties in architectural and industrial primers and topcoats to improve corrosion resistance and stain-blocking ability. Nicron® 604 is also used in paints to improve sag resistance and maximize prime pigment extension.

Nicron® 503 is a high purity, 5-Hegman microcrystalline talc product with minimal viscosity build. Nicron® 503 is part of the Engineered Series of Magris Talc products that offer unique particle size distributions for improved paint performance properties. Nicron® 503 is an excellent choice for modern protective coating applications due to its hydrophobic nature, very low mineral solubility, and proven anti-corrosion performance. Nicron® 503 disperses easily in high-solids and solventborne coatings and gives very good paint stability, rheology, and anti-settling properties.

JetFil® T290 is an off-white, extremely platy talc. This product is recommended for improving stiffness, HDT, and dimensional stability in general-purpose and commodity plastic applications, including wood-plastic composites. It could also help in achieving good long-term thermal stability (heat aging).

JetFil® M500 is a high-purity, platy, fine talc, which is recommended for improving stiffness, HDT, and dimensional stability in polymers. It is used in polyethylene, polypropylene, PVC, and other plastic-based applications to achieve maximum stiffness at loading levels of up to 40% or higher. JetFil® M500 is available in densified form to improve feeding, enhance extrusion throughput, and reduce dusting.

JetFil® T390 is an off-white, extremely platy talc. This product is recommended for improving stiffness, HDT, and dimensional stability in general-purpose and commodity plastic applications, including wood-plastic composites. It could also help in achieving good long-term thermal stability (heat aging).

Mistron® HYPERPLATE is produced using a proprietary delaminating process developed by Magris Talc which results in a highly lamellar talc compared with conventionally micronized grades. Mistron® HYPERPLATE enhances rubber compound barrier properties by restricting liquid and gas diffusion. It combines rubber reinforcement with processability, providing lower compound viscosity for improved flow in extrusion and molding applications. Mistron® HYPERPLATE is densified and has excellent flow properties for easy handling. It is a natural functional filler with a low environmental impact. 

Nicron® 554 is a high-purity microcrystalline talc. The lamellar nature of Nicron® 554 enhances film strength and flexibility and provides barrier properties in architectural and industrial primers and topcoats to improve corrosion resistance and stain-blocking ability. Nicron® 554 is also used in paints to improve sag resistance and maximize prime pigment extension.

MistroFoam is a lower-brightness, high-purity, platy, fine talc that is surface treated for improved dispersion and hydrophobicity, as well as die lubrication in plastics and rubber applications. Additionally, it is used for microcellar foam nucleation in polymeric foams and for improving water resistance and electrical properties in wire and cable applications.

Mistron® ZSC is an off-white, high-purity, platy, fine talc that is surface treated for improved dispersion and hydrophobicity, as well as die lubrication in plastics and rubber applications. Additionally, it is used for microcellar foam nucleation in polymeric foams and for improving water resistance and electrical properties in wire and cable applications.

JetFil® H290 is an off-white talc recommended for improving stiffness, HDT, and dimensional stability in polymer applications. It is used in polypropylene applications to achieve maximum stiffness at loading levels as high as 20%, 40%, or higher. It is commonly used in wood-plastic composites (WPC).

JetFil® M400 is a high-purity, platy, medium-size talc recommended for improving stiffness, HDT, and dimensional stability in polymer applications. It is used in polyethylene, polypropylene, PVC, and other plastic-based applications to achieve maximum stiffness at loading levels of up to 40% or higher. JetFil® M400 is available in densified form to improve feeding, enhance extrusion throughput, and reduce dusting.

JetFil® H590 is an off-white talc recommended for improving stiffness, HDT, and dimensional stability in polymer applications. It is used in polypropylene applications to achieve maximum stiffness at loading levels as high as 20%, 40%, or higher. It is commonly used in wood-plastic composites (WPC).