Products

Because of its cationic character and the extremely high polarity of Deuteron LE 100 LV, the electrical resistance is reduced considerably – even when using small quantities.Deuteron LE 100 LV is delivered with an active content of 100 %. The product is free of solvent and of low viscosity. It is characterized by ease of handling. Deuteron LE 100 LV can be processed at room temperature and below without melting or producing a master batch. That is why the product is particularly suitable for solvent free systems.Deuteron LE 100 LV can be used (among others) in PUR-foams (production of shoe-soles), UV- or electron-beam curing screen inks to avoid electrostatic charge. back

Deuteron MK-matting agents are suitable as exclusive matting agents for water-borne, solvent-borne and solvent-free systems, air-drying as well as stoving. They can also be used in printing inks, wood lacquers, UV-curing coatings, coil-coatings, lacquers on foils, aqueous wood- and furniture varnishes.The finer types are suitable where particularly thin dry films are applied or where very smooth surfaces have to be realized. The combination with inorganic matting agents is possible and leads to improved mechanical resistances. Scratch resistance and resistance against polishing will be increased.Deuteron MK matting agents are micro-ground resp. micronized powders. The fineness enables Deuteron MK-products to be used in a wide field of applications for producing satin-flat and satin-gloss coatings. The small binder demand of Deuteron MK only leads to a nonessential viscosity influence, which is important for UV-curing lacquers. Deuteron MK is resistant against solvents and chemicals which are customary in the paint industry. These products can also be used in exterior applications. Adjustments to specific requirements can easily be made due to the different particle sizes, available. back

Deuteron MK-matting agents are suitable as exclusive matting agents for water-borne, solvent-borne and solvent-free systems, air-drying as well as stoving. They can also be used in printing inks, wood lacquers, UV-curing coatings, coil-coatings, lacquers on foils, aqueous wood- and furniture varnishes.The finer types are suitable where particularly thin dry films are applied or where very smooth surfaces have to be realized. The combination with inorganic matting agents is possible and leads to improved mechanical resistances. Scratch resistance and resistance against polishing will be increased.Deuteron MK matting agents are micro-ground resp. micronized powders. The fineness enables Deuteron MK-products to be used in a wide field of applications for producing satin-flat and satin-gloss coatings. The small binder demand of Deuteron MK only leads to a nonessential viscosity influence, which is important for UV-curing lacquers. Deuteron MK is resistant against solvents and chemicals which are customary in the paint industry. These products can also be used in exterior applications. Adjustments to specific requirements can easily be made due to the different particle sizes, available. back

Deuteron SF 707 increases the smoothness and adds a pleasant grip to the surface. It includes neither waxes nor silicones. The matting effect is smooth, so that the haptic can be adjusted, without heavily influencing the gloss level.Deuteron SF 707 is suitable for systems where smoothness and pleasant haptic is desired in small dosages. Depending on the complete system Deuteron SF 707 can also be used to improve the mechanical resistance. back

Deuteron MM 684 is suited for all common coil-coating systems. This includes its utilization in conventional high-quality stove enamels. In addition, Deuteron MM 684 can be used in a variety of applications, preferably in pigmented paints and lacquers.Deuteron MM 684 is a mixture of finest-ground (micronized) materials that is well suited as a matting agent in paints and lacquers. Apart from the good matting effect, special importance is also attached to a low binder requirement in order not to affect the flow properties of the matted system considerably. This leads to a good formulation margin in the processing.Deuteron MM 684 does not contain any wax additives, thus coating layers equipped with it are not expected to cause any adhesion problems in multi-layer systems or repair coatings. back

Deuteron MM 677 can be used as a matting agent in various aqueous coating systems. These can be lacquers based on acrylic dispersion, wood glazings, wood- and fur­niture lacquers, printing inks and industrial finishes (air-drying and stoving enamels).In comparison with powdery matting agents Deuteron MM 677 particularly offers the advantage of dust-free handling. The product can be easily incorporated by all common dispersing processes. When producing clear varnish, only a small rate of shear is required to incorporate Deuteron MM 677. This prevents forming of micro foam in the production batch. Even when Deuteron MM 677 is added to the mill base or the dispersion-medium, overmilling is practically impossible due to its excellent shear stability.The matting liquid is kept free of wetting agent and binder. Their presence usually limits the compatibility. Waxes or similar products are not included either. This allows for the use of Deuteron MM 677 in a wide field of applications. Deuteron MM 677 causes little cloudiness and is therefore also suitable for the use in clear varnishes. back

Pergopak-matting agents are suitable as exclusive matting agents for water-borne, solvent-borne and solvent-free systems, air-drying as well as stoving. They can also be used in printing inks, wood lacquers, UV-curing coatings, coil-coatings, lacquers on foils, aqueous wood- and furniture varnishes.The finer types are suitable where particularly thin dry films are applied or where very smooth surfaces have to be realized. The combination with inorganic matting agents is possible and leads to improved mechanical resistances. Scratch resistance and resistance against polishing will be increased.Deuteron MK matting agents are micro-ground resp. micronized powders. The fineness enables Pergopak M-products to be used in a wide field of applications for producing satin-flat and satin-gloss coatings. The small binder demand of Pergopak M only leads to a nonessential viscosity influence, which is important for UV-curing lacquers. Deuteron MK is resistant against solvents and chemicals which are customary in the paint industry. These products can also be used in exterior applications. Adjustments to specific requirements can easily be made due to the different particle sizes, available. back

Deuteron-WAX A is a micronized polyamide wax characterized by a fine particle size distribution and good ease of dispersion.Deuteron-WAX A is used as a matting agent to produce a mat or silk finish in all types of furniture and wood lacquers. In metal decorating and coil applications Deuteron-WAX A can be used to improve water resistance, slip properties and mar resistance in a wide range of general and special, solvent-based and water-based coatings. In powder coatings the wax is used as a flattening agent.Deuteron-WAX A shows excellent heat stability, chemical resistance and hardness. It shows better recoatability compared to micronized waxes based on polyethylene or polypropylene. The dispersed wax shows resistance to settling. Additionally it retards the settling of pigments and fillers and assists in their redispersion. The product has been designed specifically for incorporation in lacquers and coatings using high speed stirring only. This makes the production process more economic. back

Deuteron-WAX PP is a micronized poly-propylene wax characterized by a fine particle size distribution and good ease of dispersion.It can be used in all solvent-based lacquer systems and printing inks; both air-drying and stoving. The use of Deuteron-WAX PP also leads to excellent results in powder coatings.The dispersed wax shows resistance to settling. Additionally it retards the settling of pigments and fillers and assists in their redispersion. Deuteron-WAX PP has been designed specifically for incorporation in lacquers and coatings using high speed stirring only. This makes the production process more economic. back

Deuteron-WAX TF has been designed specifically for incorporation in lacquers and coatings using high speed stirring only. This makes the production process more economic. Deuteron-WAX TF imparts excellent buff resistance and slip properties. It produces a durable, semi-gloss finish when used either alone or with silica.Application It can be used in all solvent-based lacquer systems and printing inks; both air-drying and stoving. The use of Deuteron-WAX TF also leads to excellent results in powder coatings. back

Deuteron ST texturing agents can be used in both solvent-based and water-based coating systems. Potential applications include coil-coating systems and coatings for plastic surfaces. Deuteron ST-x can be used to customize the haptical and optical surface properties. They can also be used as a functional additive to reduce the coefficient of sliding friction.Deuteron ST texturing agents are powders. They give coatings a surface texture. The nature and degree of texturing depends on the applied film thickness and the ratio of texturing agent to binder.The texturing agents have different particle size distributions. The coarser grade induces more intense texturing with good maintenance of gloss. The finer grade gives finer texturing. Depending on the specific formulation this can lead to a reduction in the degree of gloss. The coarser fractions are responsible for the texturing, whilst the finer particles can lead to matting. back

Deuteron MM 823 has been developed for use in solvent-based and solvent-free, non-aqueous coating systems, printing inks and powder coatings. The presence of PTFE in Deuteron MM 823 generally spoils wetting when the product is used in water.Deuteron MM 823 imparts coatings a high resistance to metal marking and abrasion. Scratch resistance will be improved. The product is non thermoplastic. Its use imparts good blocking stability. Increased dosage interferes with the coating‘s gloss. back

Deuteron PMH C (compact) is a micronized, pure thermoset with a compact particle structure. Due to its excellent fineness the product can be used as a matting additive in many applications in varnishes and coatings.Deuteron PMH C can be used as a matting agent in aqueous and solvent based coating systems. A suitable matting agent combination can be created for solvent free, radiation curing varnishes with the additional use of SiO2.With its favorable oil absorption value the product is predestinated for coatings with high flexibility, e.g. coil coatings and leather finishes. back

Deuteron ST texturing agents can be used in both solvent-based and water-based coating systems. Potential applications include coil-coating systems and coatings for plastic surfaces. Deuteron ST-x can be used to customize the haptical and optical surface properties. They can also be used as a functional additive to reduce the coefficient of sliding friction.Deuteron ST texturing agents are powders. They give coatings a surface texture. The nature and degree of texturing depends on the applied film thickness and the ratio of texturing agent to binder.The texturing agents have different particle size distributions. The coarser grade induces more intense texturing with good maintenance of gloss. The finer grade gives finer texturing. Depending on the specific formulation this can lead to a reduction in the degree of gloss. The coarser fractions are responsible for the texturing, whilst the finer particles can lead to matting. back

Deuteron ST texturing agents can be used in both solvent-based and water-based coating systems. Potential applications include coil-coating systems and coatings for plastic surfaces. Deuteron ST-x can be used to customize the haptical and optical surface properties. They can also be used as a functional additive to reduce the coefficient of sliding friction.Deuteron ST texturing agents are powders. They give coatings a surface texture. The nature and degree of texturing depends on the applied film thickness and the ratio of texturing agent to binder.The texturing agents have different particle size distributions. The coarser grade induces more intense texturing with good maintenance of gloss. The finer grade gives finer texturing. Depending on the specific formulation this can lead to a reduction in the degree of gloss. The coarser fractions are responsible for the texturing, whilst the finer particles can lead to matting. back

Deuteron MK-matting agents are suitable as exclusive matting agents for water-borne, solvent-borne and solvent-free systems, air-drying as well as stoving. They can also be used in printing inks, wood lacquers, UV-curing coatings, coil-coatings, lacquers on foils, aqueous wood- and furniture varnishes.The finer types are suitable where particularly thin dry films are applied or where very smooth surfaces have to be realized. The combination with inorganic matting agents is possible and leads to improved mechanical resistances. Scratch resistance and resistance against polishing will be increased.Deuteron MK matting agents are micro-ground resp. micronized powders. The fineness enables Deuteron MK-products to be used in a wide field of applications for producing satin-flat and satin-gloss coatings. The small binder demand of Deuteron MK only leads to a nonessential viscosity influence, which is important for UV-curing lacquers. Deuteron MK is resistant against solvents and chemicals which are customary in the paint industry. These products can also be used in exterior applications. Adjustments to specific requirements can easily be made due to the different particle sizes, available. back

Deuteron MM 669 reduces the gloss of organic coatings. At a higher dosage the viscosity will only be slightly increased. Good flow and processibility remain and allow for all usual application processes.When using Deuteron MM 669 in UV-curing binders no cloudiness has been noticed. The surfaces of coatings show excellent resistance to burnishing and mar resistance. Deuteron MM 669 imparts coatings with a soft touch. In general, the additional use of waxes, PTFE or similar products is not necessary. back

Pergopak-matting agents are suitable as exclusive matting agents for water-borne, solvent-borne and solvent-free systems, air-drying as well as stoving. They can also be used in printing inks, wood lacquers, UV-curing coatings, coil-coatings, lacquers on foils, aqueous wood- and furniture varnishes.The finer types are suitable where particularly thin dry films are applied or where very smooth surfaces have to be realized. The combination with inorganic matting agents is possible and leads to improved mechanical resistances. Scratch resistance and resistance against polishing will be increased.Deuteron MK matting agents are micro-ground resp. micronized powders. The fineness enables Pergopak M-products to be used in a wide field of applications for producing satin-flat and satin-gloss coatings. The small binder demand of Pergopak M only leads to a nonessential viscosity influence, which is important for UV-curing lacquers. Deuteron MK is resistant against solvents and chemicals which are customary in the paint industry. These products can also be used in exterior applications. Adjustments to specific requirements can easily be made due to the different particle sizes, available. back

Deuteron MM 680 is primarily recommended for use in solvent-based 2-component systems (polyurethane or epoxy-resin lacquers). Beyond that, the product is also suitable for other air- and oven-drying systems.Deuteron MM 680 is a mixture of finest-ground (micronized) materials that is well suited as a matting agent in paints and lacquers. Apart from the good matting effect, special importance is also attached to a low binder requirement in order not to affect the flow properties of the matted system considerably. This leads to a good formulation margin in the processing.Deuteron MM 680 does not contain any wax additives, thus coating layers equipped with it are not expected to cause any adhesion problems in multi-layer systems or repair coatings. back

Deuteron ST texturing agents can be used in both solvent-based and water-based coating systems. Potential applications include coil-coating systems and coatings for plastic surfaces. Deuteron ST-x can be used to customize the haptical and optical surface properties. They can also be used as a functional additive to reduce the coefficient of sliding friction.Deuteron ST texturing agents are powders. They give coatings a surface texture. The nature and degree of texturing depends on the applied film thickness and the ratio of texturing agent to binder.The texturing agents have different particle size distributions. The coarser grade induces more intense texturing with good maintenance of gloss. The finer grade gives finer texturing. Depending on the specific formulation this can lead to a reduction in the degree of gloss. The coarser fractions are responsible for the texturing, whilst the finer particles can lead to matting. back

Deuteron AP 348 is designed for the use in powder coatings.An important feature of Deuteron AP 348 is the low viscosity of the fusion. It is a non-polar polyethylene wax with good toughness in spite of the high hardness. Surfaces of powder coatings containing Deuteron AP 348 show a remarkable slip resistance. This effect is shown by only a few waxes.In some cases it has been noticed that the presence of Deuteron AP 348 in powder coatings improves their flow. This depends on the low softening respective melting point of this polyethylene wax and its limited compatibility with the used resins. back

Deuteron MM 659 reduces the gloss in above mentioned coating systems. At a higher dosage the viscosity will only be slightly increased. Good flow and processibility remain and allow for all usual application processes.Spoiling of the transparency in UV-curing lacquers is not possible due to the favorable composition of Deuteron MM 659. The obtained coating surfaces show excellent resistance regarding burnishing and mar resistance. The use of Deuteron MM 659 imparts coatings with a soft touch. In general, the additional use of waxes, PTFE or similar products is not necessary. A reaction between matting agent and lacquer system and therefore a spoiling of the storage stability has not been noticed. back

Deuteron ST texturing agents can be used in both solvent-based and water-based coating systems. Potential applications include coil-coating systems and coatings for plastic surfaces. Deuteron ST-x can be used to customize the haptical and optical surface properties. They can also be used as a functional additive to reduce the coefficient of sliding friction.Deuteron ST texturing agents are powders. They give coatings a surface texture. The nature and degree of texturing depends on the applied film thickness and the ratio of texturing agent to binder.The texturing agents have different particle size distributions. The coarser grade induces more intense texturing with good maintenance of gloss. The finer grade gives finer texturing. Depending on the specific formulation this can lead to a reduction in the degree of gloss. The coarser fractions are responsible for the texturing, whilst the finer particles can lead to matting. back