Products

Deuteron OG 8634 is based on polymethyl urea resin as an effective substance. The resin shows excellent hardness and abrasion resistance. It is resistant to most customary solvents and shows a good resistance to temperatures of up to 200 °C. When used as an additive in solvent-based paint systems, Deuteron OG 8634 improves properties regarding slip and static friction and provides increased mechanical resistance. Compared with wax based, Deuteron OG 8634 does not spoil the recoatability. The small particle size allows for its use in coating-systems which are applied in low film thickness. Deuteron OG 863x can reduce the gloss when used as a surface additive. This can be desired for certain applications. The gloss reduction is dependant on the type of employed binder, the applied film thickness and the selected dosage.Deuteron OG 8634 is designed for the use in aqueous and solvent-based lacquers and in coatings which are applied in low film thickness. Due to the good weather resistance and color fastness of the used polymer the product can also be used in coating systems for exterior applications. This additive is the alternative to wax dispersions with their well-known typical side-effects. back

Deuteron MK-matting agents are suitable as exclusive matting agents for water-borne, solvent-borne and solvent-free systems, air-drying as well as stoving. They can also be used in printing inks, wood lacquers, UV-curing coatings, coil-coatings, lacquers on foils, aqueous wood- and furniture varnishes.The finer types are suitable where particularly thin dry films are applied or where very smooth surfaces have to be realized. The combination with inorganic matting agents is possible and leads to improved mechanical resistances. Scratch resistance and resistance against polishing will be increased.Deuteron MK matting agents are micro-ground resp. micronized powders. The fineness enables Deuteron MK-products to be used in a wide field of applications for producing satin-flat and satin-gloss coatings. The small binder demand of Deuteron MK only leads to a nonessential viscosity influence, which is important for UV-curing lacquers. Deuteron MK is resistant against solvents and chemicals which are customary in the paint industry. These products can also be used in exterior applications. Adjustments to specific requirements can easily be made due to the different particle sizes, available. back

Deuteron MK-matting agents are suitable as exclusive matting agents for water-borne, solvent-borne and solvent-free systems, air-drying as well as stoving. They can also be used in printing inks, wood lacquers, UV-curing coatings, coil-coatings, lacquers on foils, aqueous wood- and furniture varnishes.The finer types are suitable where particularly thin dry films are applied or where very smooth surfaces have to be realized. The combination with inorganic matting agents is possible and leads to improved mechanical resistances. Scratch resistance and resistance against polishing will be increased.Deuteron MK matting agents are micro-ground resp. micronized powders. The fineness enables Deuteron MK-products to be used in a wide field of applications for producing satin-flat and satin-gloss coatings. The small binder demand of Deuteron MK only leads to a nonessential viscosity influence, which is important for UV-curing lacquers. Deuteron MK is resistant against solvents and chemicals which are customary in the paint industry. These products can also be used in exterior applications. Adjustments to specific requirements can easily be made due to the different particle sizes, available. back

Deuteron OG 8674 is based on polymethyl urea resin as an effective substance. The resin shows excellent hardness and abrasion resistance. It is resistant to most customary solvents and shows a good resistance to temperatures of up to 200 °C. When used as an additive in solvent-based paint systems, Deuteron OG 8674 improves properties regarding slip and static friction and provides increased mechanical resistance. Compared with wax-based additives Deuteron OG 8674 does not spoil the recoatability. The small particle size also allows for its use in coating systems which are applied in low film thickness. Deuteron OG 867x can reduce the gloss when used as a surface additive. This can be desired for certain applications. The gloss reduction is dependant on the type of employed binder, the applied film thickness and the selected dosage.Deuteron OG 8674 is designed for use in aqueous lacquers and in coatings which are applied in low film thickness. Due to the good weather resistance and color fastness of the used polymer the product can also be used in coating systems for exterior applications. This additive is the alternative to wax-dispersions with their well-known typical side-effects. back

Deuteron VT 920 is suitable for use as a thickener and stabilizing additive for all aqueous coating systems and technical applications such as waterthinnable lacquers, dispersion paints and plasters, glues, printing inks, silicon paints as well as pigments and filler preparations. Deuteron VT 920 prevents settling of pigments and fillers and separation of the liquid phase during storage. Application is made easier through pronounced structural viscosity. The viscosity sinks when the shear force is increased. It rapidly returns to the starting value when the shear force is removed. The product is compatible with most commonly used binders and thickeners used in the coating industry. back

Deuteron VT 930 is suitable for use as a thickener and stabilizing additive for all aqueous coating systems and technical applications such as waterthinnable lacquers, dispersion paints and plasters, glues, printing inks, silicon paints as well as pigments and filler preparations. Deuteron VT 930 prevents settling of pigments and fillers and separation of the liquid phase during storage. Application is made easier through pronounced structural viscosity. The viscosity sinks when the shear force is increased. It rapidly returns to the starting value when the shear force is removed. The product is compatible with most commonly used binders and thickeners used in the coating industry. back

Deuteron-WAX A is a micronized polyamide wax characterized by a fine particle size distribution and good ease of dispersion.Deuteron-WAX A is used as a matting agent to produce a mat or silk finish in all types of furniture and wood lacquers. In metal decorating and coil applications Deuteron-WAX A can be used to improve water resistance, slip properties and mar resistance in a wide range of general and special, solvent-based and water-based coatings. In powder coatings the wax is used as a flattening agent.Deuteron-WAX A shows excellent heat stability, chemical resistance and hardness. It shows better recoatability compared to micronized waxes based on polyethylene or polypropylene. The dispersed wax shows resistance to settling. Additionally it retards the settling of pigments and fillers and assists in their redispersion. The product has been designed specifically for incorporation in lacquers and coatings using high speed stirring only. This makes the production process more economic. back

For aqueous systems, such as dispersion paint, glue, dispersion plaster, water-dilutable lacquer, printing inks, silicate paint, aqueous pigment/filler preparations.Especially well suited for the building and do-it-yourself sectors. Wherever high viscosity and pseudoplastic behavior is required but high-performance stirring devices, such as dissolvers, are not available.In pigmented aqueous systems, such as dispersion paint and cast, the use of Deuteron VT 855 prevents a deposition of the pigments and fillers as well as a separation of the liquid phase during storage. The applicability of the coating materials is improved. The product is compatible with most of binding and thickening agents commonly used in the paint industry. When properly used, Deuteron VT 855 allows the preparation of highly viscous systems without technical help. back

Deuteron OG 8670 is based on polymethyl urea resin as an effective substance. The resin shows excellent hardness and abrasion resistance. It is resistant to most customary solvents and shows a good resistance to temperatures of up to 200 °C. When used as an additive in solvent-based paint systems, Deuteron OG 8670 improves properties regarding slip and static friction and provides increased mechanical resistance. Compared with wax-based additives Deuteron OG 8670 does not spoil the recoatability. The small particle size also allows for its use in coating systems which are applied in low film thickness. Deuteron OG 867x can reduce the gloss when used as a surface additive. This can be desired for certain applications. The gloss reduction is dependant on the type of employed binder, the applied film thickness and the selected dosage.Deuteron OG 8670 is designed for use in aqueous lacquers and in coatings which are applied in low film thickness. Due to the good weather resistance and color fastness of the used polymer the product can also be used in coating systems for exterior applications. This additive is the alternative to wax-dispersions with their well-known typical side-effects. back

Deuterol 201 E is a defoaming dispersing agent for fillers and pigments in water soluble and water miscible primers and lacquers. The wetting effect of Deuterol 201 E in primers and one-coat lacquers, which are applied to badly degreased metal substrates, considerably improves the adhesion of the coating film to the metal substrate. The product also shows a defoaming effect in the manufacture as well in the processing of water dilutable systems. back

Deuteron OG 8632 is based on polymethyl urea resin as an effective substance. The resin shows excellent hardness and abrasion resistance. It is resistant to most customary solvents and shows a good resistance to temperatures of up to 200 °C. When used as an additive in solvent-based paint systems, Deuteron OG 8632 improves properties regarding slip and static friction and provides increased mechanical resistance. Compared with wax based, Deuteron OG 8632 does not spoil the recoatability. The small particle size allows for its use in coating-systems which are applied in low film thickness. Deuteron OG 863x can reduce the gloss when used as a surface additive. This can be desired for certain applications. The gloss reduction is dependant on the type of employed binder, the applied film thickness and the selected dosage.Deuteron OG 8632 is designed for the use in aqueous and solvent-based lacquers and in coatings which are applied in low film thickness. Due to the good weather resistance and color fastness of the used polymer the product can also be used in coating systems for exterior applications. This additive is the alternative to wax dispersions with their well-known typical side-effects. back

Deuteron ND 953 helps to prevent the uncontrollable increase in viscosity which can arise in presence of certain pigments and fillers in heavily-filled aqueous systems. The required rheological properties of the paint or coating material can be obtained just through the character of the used binder or by addition of a suitable thickener.The presence of Deuteron ND 953 improves the storage stability. Unwelcome thickening during storage will be avoided or limited.Deuteron ND 953 is used in aqueous paints and coating materials, e.g. masonry paints, fillers, aqueous primers, water-based bituminous emulsions. The product is also suitable for use in water-based pigment preparations. It is most effective in presence of inorganic pigments and fillers. back

Deuteron MM 680 is primarily recommended for use in solvent-based 2-component systems (polyurethane or epoxy-resin lacquers). Beyond that, the product is also suitable for other air- and oven-drying systems.Deuteron MM 680 is a mixture of finest-ground (micronized) materials that is well suited as a matting agent in paints and lacquers. Apart from the good matting effect, special importance is also attached to a low binder requirement in order not to affect the flow properties of the matted system considerably. This leads to a good formulation margin in the processing.Deuteron MM 680 does not contain any wax additives, thus coating layers equipped with it are not expected to cause any adhesion problems in multi-layer systems or repair coatings. back

Deuteron OG 8612 is based on polymethyl urea resin as an effective substance. The resin shows excellent hardness and abrasion resistance. It is resistant to most customary solvents and shows a good resistance to temperatures of up to 200 °C. When used as an additive in solvent based paint systems, Deuteron OG 8612 improves properties regarding slip and static friction and provides increased mechanical resistance. Compared with wax-based additives, Deuteron OG 8612 does not spoil the recoatability. The small particle size allows for its use in coating-systems which are applied in low film thickness. Deuteron OG 861x can reduce the gloss when used as a surface additive. This can be desired for certain applications. The gloss reduction is dependant on the type of employed binder, the applied film thickness and the selected dosage.Deuteron OG 8612 is recommended for use in solvent based coatings which are applied in low film thickness, e.g. can-coatings. Due to the good weather resistance and color fastness of the used polymer the product can also be used in coating systems for exterior applications. This additive is the alternative to wax dispersions with their well-known typical side-effects. back

Deuteron OG 863 is based on polymethyl urea resin as an effective substance. The resin shows excellent hardness and abrasion resistance. It is resistant to most customary solvents and shows a good resistance to temperatures of up to 200 °C. When used as an additive in solvent-based paint systems, Deuteron OG 863 improves properties regarding slip and static friction and provides increased mechanical resistance. Compared with wax based, Deuteron OG 863 does not spoil the recoatability. The small particle size allows for its use in coating-systems which are applied in low film thickness. Deuteron OG 863x can reduce the gloss when used as a surface additive. This can be desired for certain applications. The gloss reduction is dependant on the type of employed binder, the applied film thickness and the selected dosage.Deuteron OG 863 is designed for the use in aqueous and solvent-based lacquers and in coatings which are applied in low film thickness. Due to the good weather resistance and color fastness of the used polymer the product can also be used in coating systems for exterior applications. This additive is the alternative to wax dispersions with their well-known typical side-effects. back

Deuteron SR 28 is soluble in water and forms firm gels when used in small quantities. The extremely high thixotropy avoids a breakdown of the solution even in small quantities.Deuteron SR 28 requires no heat for mixing. It can be stirred into cold water or a liquid agent. Using a higher shearing force would lead to a shorter mixing time and a maximum exploitation of the product respectively. A higher shearing force speeds up the dissolving process and leads to a faster final viscosity and thixotropy.Application All aqueous systems, such as dispersion paints (emulsion paints) and adhesives, emulsion plasters, aqueous insulating primers, glues, slurries, water soluble lacquers and printing inks. back

Deuteron VT 910 is suitable for use as a thickener and stabilizing additive for all aqueous coating systems and technical applications such as waterthinnable lacquers, dispersion paints and plasters, glues, printing inks, silicon paints as well as pigments and filler preparations. Deuteron VT 910 prevents settling of pigments and fillers and separation of the liquid phase during storage. Application is made easier through pronounced structural viscosity. The viscosity sinks when the shear force is increased. It rapidly returns to the starting value when the shear force is removed. The product is compatible with most commonly used binders and thickeners used in the coating industry. back

For aqueous systems, such as dispersion paint, glue, dispersion plaster, water-dilutable lacquer, printing inks, silicate paint, aqueous pigment/filler preparations.Especially well suited for the building and do-it-yourself sectors. Wherever high viscosity and pseudoplastic behavior are required but high-performance stirring devices, such as dissolvers, are not available.In pigmented aqueous systems, such as dispersion paint and cast, the use of Deuteron VT 856 prevents a deposition of the pigments and fillers as well as a separation of the liquid phase during storage. The applicability of the coating materials is improved. The product is compatible with most binding and thickening agents commonly used in the paint industry. When properly used, Deuteron VT 856 allows the preparation of highly viscous systems without technical help. back

Deuteron OG 8614 is based on polymethyl urea resin as an effective substance. The resin shows excellent hardness and abrasion resistance. It is resistant to most customary solvents and shows a good resistance to temperatures of up to 200 °C. When used as an additive in solvent based paint systems, Deuteron OG 8614 improves properties regarding slip and static friction and provides increased mechanical resistance. Compared with wax-based additives, Deuteron OG 8614 does not spoil the recoatability. The small particle size allows for its use in coating-systems which are applied in low film thickness. Deuteron OG 861x can reduce the gloss when used as a surface additive. This can be desired for certain applications. The gloss reduction is dependant on the type of employed binder, the applied film thickness and the selected dosage.Deuteron OG 8614 is recommended for use in solvent based coatings which are applied in low film thickness, e.g. can-coatings. Due to the good weather resistance and color fastness of the used polymer the product can also be used in coating systems for exterior applications. This additive is the alternative to wax dispersions with their well-known typical side-effects. back

Deuteron OG 8672 is based on polymethyl urea resin as an effective substance. The resin shows excellent hardness and abrasion resistance. It is resistant to most customary solvents and shows a good resistance to temperatures of up to 200 °C. When used as an additive in solvent-based paint systems, Deuteron OG 8672 improves properties regarding slip and static friction and provides increased mechanical resistance. Compared with wax-based additives Deuteron OG 8672 does not spoil the recoatability. The small particle size also allows for its use in coating systems which are applied in low film thickness. Deuteron OG 867x can reduce the gloss when used as a surface additive. This can be desired for certain applications. The gloss reduction is dependant on the type of employed binder, the applied film thickness and the selected dosage.Deuteron OG 8672 is designed for use in aqueous lacquers and in coatings which are applied in low film thickness. Due to the good weather resistance and color fastness of the used polymer the product can also be used in coating systems for exterior applications. This additive is the alternative to wax-dispersions with their well-known typical side-effects. back

Deuteron OG 861 is based on polymethyl urea resin as an effective substance. The resin shows excellent hardness and abrasion resistance. It is resistant to most customary solvents and shows a good resistance to temperatures of up to 200 °C. When used as an additive in solvent based paint systems, Deuteron OG 861 improves properties regarding slip and static friction and provides increased mechanical resistance. Compared with wax-based additives, Deuteron OG 861 does not spoil the recoatability. The small particle size allows for its use in coating-systems which are applied in low film thickness. Deuteron OG 861x can reduce the gloss when used as a surface additive. This can be desired for certain applications. The gloss reduction is dependant on the type of employed binder, the applied film thickness and the selected dosage.Deuteron OG 861 is recommended for use in solvent based coatings which are applied in low film thickness, e.g. can-coatings. Due to the good weather resistance and color fastness of the used polymer the product can also be used in coating systems for exterior applications. This additive is the alternative to wax dispersions with their well-known typical side-effects. back

The presence of Deuteron VT 819 prevents the settling of pigments/extenders and the separation of the liquid phases during the storage in aqueous systems such as emulsion paints and plasters. The applicability of the paints will be improved. Deuteron VT 819 is compatible with most binders and thickeners which are customary in the paint industry.Deuteron VT 819 is fully soluble in water and mixtures of organic liquids with a water proportion of at least 60 %. The product has no tendency to form lumps. Solutions can be produced with a simple stirrer. The use of a high shear rate is not necessary. The product‘s easy solubility is only given when it is incorporated into systems with a pH-value ranging between neutral and alkaline.When the solution is prepared, its pH-value can be adjusted towards an acidic pH-value.Application Aqueous primers, emulsions paints, adhesives, dispersion plasters, printing inks, silicate paints, aqueous preparations of pigments and fillers. back

In aqueous systems, such as emulsion paints and plasters, the use of Deuteron XG prevents a deposition of the pigments and extenders as well as a separation of the liquid phase during storage. The applicability of the paints is improved. Deuteron XG is compatible with most binders and thickeners which are customary in the paint industry.Deuteron XG is insoluble in most organic liquids. The product is fully soluble in water and mixtures of organic liquids with a water proportion of at least 60 %. Pre-wetting of Deuteron XG with glycols at a ratio of 1 : 1 accelerates the swelling- and dissolution process. Aqueous solutions of Deuteron XG show a high pseudoplasticity. High rate of shear lowers the viscosity. Reducing the shear rate increases viscosity again. Solutions of Deuteron XG are stable regarding the pH-value and temperature. There is almost no change in stability from pH 2 – 12. The temperature hardly has any influence on the viscosity of a preparation with Deuteron XG.Application All aqueous systems, such as dispersion paints (emulsion paints) and adhesives, emulsion plasters, aqueous insulating primers, glues, slurries, water soluble lacquers and printing inks. back