Products

Ebalta MG 703 / Z 400 is a 2-components polyurethane material, which is cured thermically and used for prototypes. The four mentioned formulations differ in being filled or non-filled and their mechanical properties. The B-components Z 400 (potlife 8-12 min.) and Z 460 (potlife 60-70 min.) are identical and can be mixed with each other to control the reactivity, e.g. potlife. These combinations of Z 400 and Z 460 comp. B can be made any way as long as the totally required quantity of comp. B is observed (for each system).

Ebalta AH 100 is a very thin, unfilled epoxy resin, which can be used with different hardeners. Depending on the application the suitable hardener can be mixed with the resin AH 100. This resin/hardener-mixture is inexpensive and therefore suitable as binder for silica sand auxiliary negatives.

Ebalta AH 110 / TGL is an unfilled epoxy resin with high strength values and dimensional stability, even at increased temperature. It can be used as casting resin with powdered fillers as aluminum powder, laminating resin with glass fabric and binder with grainy fillers as aluminum granules. Depending on application the suitable hardener can be mixed with the resin. AH 110/TGL is suitable as laminating resin for big surfaces at a temperature range until 110 °C.

Ebalta AH 110 / TGS is a non-filled epoxy resin with high strength and dimensional stability, even at increasing temperature. It also can be used as casting resin with powder fillers as aluminum powder, as laminating resin with glass fabrics and as binding resin with granular fillers as aluminum granules. Depending on the application if just needs to use a different hardener for the mixture. As laminating resin AH 110 / TGS is suitable for thin high solid laminates.

Ebalta AH 100 is a very thin, unfilled epoxy resin, which can be used with different hardeners. Depending on the application the suitable hardener can be mixed with the resin AH 100. Due to its almost odorless skinfriendly hardener GL this mixture is also suitable as laminating resin. The good wetting properties allow fast laminating and lead to high glass contents of the laminate. This way you get solid and dimensionally stable parts.

Ebalta AH 110 / TG is a High strength general purpose resin.

Ebalta AH 100 is a very thin, unfilled epoxy resin, which can be used with different hardeners. Depending on the application the suitable hardener can be mixed with the resin AH 100. The fast hardener TGS is used for thin laminates and small-volume back fillings.

Ebalta MG 707 / Z 400 is a 2-components polyurethane material, which is cured thermically and used for prototypes. The four mentioned formulations differ in being filled or non-filled and their mechanical properties. The B-components Z 400 (potlife 8-12 min.) and Z 460 (potlife 60-70 min.) are identical and can be mixed with each other to control the reactivity, e.g. potlife. These combinations of Z 400 and Z 460 comp. B can be made any way as long as the totally required quantity of comp. B is observed (for each system). The total amount of Z 400 and Z 460 always has to be 30 g for 100 g comp. A

Ebalta AH 140 / LI 130-2 is a general purpose resin.

Ebalta AH 100 is a very thin, unfilled epoxy resin, which can be used with different hardeners. Depending on the application the suitable hardener can be mixed with the resin AH 100. AH 100 / TGL is preferentially used for big volume backfillings.

AH 110/GL is an epoxy resin with high strength even on elevated temperatures. It can be used as a casting resin with powdery fillers like aluminum powder, as a laminating resin with fiber glass cloth and as a bonding resin for granular fillers like aluminum granules. Depending on the application you can choose from a variety of hardeners. AH 100/GL is suitable as laminating resin for large area parts and thick laminates. Due to its almost odourles skin friendly hardener GL, this mixture is especially applicable as laminating resin. With a mixing ratio of 100:39 you reach an about 15°C higher TG, slightly stiffer laminates as well as better impact resistance. The laminate thickness should not exceed 6-7 mm.

SILASTIC™ RTV-3120 are pourable rubber bases that become firm, flexible silicone rubber when cured. There is a choice of three catalysts to select from in order to tailor your working times and cure rates.

Ebalta AH 140 / LI 20 is a general purpose resin.

Ebalta AH 100 / D is a universal general purpose resin.