Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Polymer Name
- Plastics & Elastomers Functions
- Technologies
Features & Benefits
- Materials Features
Applications & Uses
- Markets
- Plastics & Elastomers End Uses
- Plastics & Elastomers Processing Methods
- Wound Dressings Application Data
Details
In “Hansaplast Aqua Protect” plaster a film made of Arnitel® PM381 is being used. The Arnitel film can keep the water and bacteria outside while being breathable at the same time.Benefits
Arnitel® Care allows for reliable solutions due its excellent breathability, ease of processing and due to its easy stretchability with low forces, not putting tension on the wound area- Medical Tubes Application Data
Details
Arnitel® Care \is also being used for medical wound dressings.Benefits
- Arnitel® TPC allows for reliable solutions in respiratory tubing due to its excellent breathability, preventing condensation
- Arnitel® TPC allows for light weight solutions as compared to silicone alternatives
- Respiratory Tubes Application Data
Details
Respirator tubing is both used in monowall and in spiralized reinforced designs.
Benefits
- Arnitel® has USP class VI and FDA approved grades available
- Arnitel® offers a good combination of flexibility, strength and kink resistance
- Arnitel® has high breathable grades available to prevent condensation inside the tube
Properties
- Flame Rating
- Mechanical Properties
- Thermal Properties
- Electrical Properties
- Rheological Calculation Properties
- Other Properties
- Mechanical Properties (TPE)
- Rheological Properties
| Value | Units | Test Method / Conditions | |
| Yield Stress | 7 | MPa | ISO 527-1/-2 |
| Yield Strain | 77 | % | ISO 527-1/-2 |
| Nominal Strain at Break | >50 | % | ISO 527-1/-2 |
| Charpy Notched Impact Strength (at +23°C) | N | kJ/m² | ISO 179/1eA |
| Charpy Notched Impact Strength (at -30°C) | N | kJ/m² | ISO 179/1eA |
| Izod Notched Impact Strength (at +23°C) | N | kJ/m² | ISO 180/1A |
| Izod Notched Impact Strength (at -20°C) | N | kJ/m² | ISO 180/1A |
| Tensile Notched Impact Strength (at +23°C) | 218 | kJ/m² | ISO 8256/1 |
| Value | Units | Test Method / Conditions | |
| Melting Temperature (10°C/min) | 195 | °C | ISO 11357-1/-3 |
| Glass Transition Temperature (at 10°C/min) | -78 | °C | ISO 11357-1/-2 |
| Coefficient of Linear Thermal Expansion (parallel) | 2.2 | E-4/°C | ISO 11359-1/-2 |
| Coefficient of Linear Thermal Expansion (normal) | 2.2 | E-4/°C | ISO 11359-1/-2 |
| Burning Behaviour (at 1.5 mm Nominal Thickness) | UL HB | class | IEC 60695-11-10 |
| Relative Temperature Index (Electrical, 1.5 mm) | 50 | °C | UL746B |
| Relative Temperature Index (with impact, 1.5 mm) | 50 | °C | UL746B |
| Relative Temperature Index (without impact, 1.5 mm) | 50 | °C | UL746B |
| Value | Units | Test Method / Conditions | |
| Relative Permittivity (100Hz) | 4.1 | — | IEC 62631-2-1 |
| Relative Permittivity (1 MHz) | 4 | — | IEC 62631-2-1 |
| Dissipation Factor (100 Hz) | 10 | E-4 | IEC 62631-2-1 |
| Dissipation Factor (1 MHz) | 170 | E-4 | IEC 62631-2-1 |
| Volume Resistivity | 1E13 | Ohm*m | IEC 62631-3-1 |
| Electric Strength | 20 | kV/mm | IEC 60243-1 |
| Comparative Tracking Index | 600 | V | IEC 60112 |
| Value | Units | Test Method / Conditions | |
| Density of Melt | 896 | kg/m³ | — |
| Thermal Conductivity of Melt | 0.1 | W/(m K) | — |
| Specific Heat Capacity Melt | 1700 | J/(kg K) | — |
| Effective Thermal Diffusivity | 6.56E-8 | m²/s | — |
| Value | Units | Test Method / Conditions | |
| Water Absorption | 0.75 | % | Sim. to ISO 62 |
| Humidity Absorption | 0.3 | % | Sim. to ISO 62 |
| Density | 1110 | kg/m³ | ISO 1183 |
| Apparent Density | 690 | kg/m³ | ISO 60 |
| Value | Units | Test Method / Conditions | |
| Tensile Modulus | 40 | MPa | ISO 527-1/-2 |
| Stress at 5% strain | 2.1 | MPa | ISO 527-1/-2 |
| Stress at 10% strain | 3.5 | MPa | ISO 527-1/-2 |
| Stress at 50% strain | 6.5 | MPa | ISO 527-1/-2 |
| Stress at 100% strain | 7.3 | MPa | ISO 527-1/-2 |
| Stress at Break | 21 | MPa | ISO 527-1/-2 |
| Strain at Break | >300 | % | ISO 527-1/-2 |
| Nominal Strain at Break | 825 | % | ISO 527-1/-2 |
| Shore D Hardness (3s) | 33 | — | ISO 868 |
| Value | Units | Test Method / Conditions | |
| Melt Volume-Flow Rate (at 230 / * °C, 2.16 / * kg) | 33 | cm³/10min | ISO 1133 |
| Molding Shrinkage (parallel) | 1.5 | % | Sim. to ISO 294-4 |
| Molding Shrinkage (normal) | 1.5 | % | Sim. to ISO 294-4 |
Regulatory & Compliance
- Certifications & Compliance
Technical Details & Test Data
- Chemical Resistance
Chemical Type Chemical Name Resistance Other Acetic acid (10% by mass) at 23°C resistant Ketones Acetone at 23°C resistant Other Ammonium hydroxide (10% by mass) at 23°C limited resistant, tests necessary to verify Other ASTM 1 at 23°C resistant Other ASTM 3 at 23°C resistant Other Brake fluids (DOT 3/4) at 23°C not resistant Other Calcium chloride (10% by mass) at 23°C limited resistant, tests necessary to verify Other Chloroform at 23°C not resistant Ethers Diethyl ether at 23°C limited resistant, tests necessary to verify Alcohols Ethanol at 23°C limited resistant, tests necessary to verify Other Ethyl Acetate at 23°C limited resistant, tests necessary to verify Other Fuel; Diesel at 85°C resistant Other Hydrochloric acid (10% by mass) at 23°C resistant Other Hydrogen peroxide (30% by mass) at 23°C limited resistant, tests necessary to verify Other Nitric acid (10% by mass) at 23°C resistant Other Phosphoric acid (10% by mass) at 23°C resistant Other Sodium hydroxide (10% by mass) at 23°C resistant Other Sulfuric acid (30% by mass) at 23°C resistant Other Tetrachloroethylene at 23°C limited resistant, tests necessary to verify Hydrocarbons Toluene at 23°C resistant Other Transformer oil at 23°C not resistant Other Trichloroethylene at 23°C not resistant Other Water at 23°C resistant Other Zinc chloride (10% by mass) at 23°C resistant - Shearstress-Shear Rate
- Stress-Strain
- Stress-Strain (TPE)
- Viscosity-Shear Rate
Packaging & Availability
- Packaging Type