Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Polymer Name
- Plastics & Elastomers Functions
- Technologies
Features & Benefits
- Materials Features
Applications & Uses
- Applications
- Plastics & Elastomers Processing Methods
- Wire and Cable Insulation Application Data
Details
Arnitel® UM551 in use for convoluted tubes or cable protection under-the-bonnet.Benefits
- Arnitel® TPC allows for reliable solutions due its high temperature resistance (class T3 and T4, Class D (150°C) enabling thin and ultra thin wall designs, Class E (175°C) >20 mm2 thick and thin wall)
- Arnitel® TPC allows for cost effective solutions (up to 50% lower system costs versus ETFE/FEP, 40% weight down versus XL PO at similar costs)
- Arnitel® TPC allows for sustainable solutions due to availability of halogen free flameretardant grades
Properties
- Mechanical Properties
- Thermal Properties
- Electrical Properties
- Other Properties
- Mechanical Properties (TPE)
- Rheological Properties
Value | Units | Test Method / Conditions | |
Yield Stress | 16 | MPa | ISO 527-1/-2 |
Yield Strain | 38 | % | ISO 527-1/-2 |
Nominal Strain at Break | >50 | % | ISO 527-1/-2 |
Charpy Notched Impact Strength (at +23°C) | N | kJ/m² | ISO 179/1eA |
Charpy Notched Impact Strength (at -30°C) | 5.6 | kJ/m² | ISO 179/1eA |
Izod Notched Impact Strength (at +23°C) | N | kJ/m² | ISO 180/1A |
Izod Notched Impact Strength (at -20°C) | 9 | kJ/m² | ISO 180/1A |
Izod Notched Impact Strength (at -30°C) | 6.4 | kJ/m² | ISO 180/1A |
Value | Units | Test Method / Conditions | |
Melting Temperature (10°C/min) | 205 | °C | ISO 11357-1/-3 |
Glass Transition Temperature (at 10°C/min) | -10 | °C | ISO 11357-1/-2 |
Vicat Softening Temperature (50°C/h 50N) | 61 | °C | ISO 306 |
Coefficient of Linear Thermal Expansion (normal) | 1.9 | E-4/°C | ISO 11359-1/-2 |
Value | Units | Test Method / Conditions | |
Relative Permittivity (100Hz) | 4.34 | — | IEC 62631-2-1 |
Relative Permittivity (1 MHz) | 3.58 | — | IEC 62631-2-1 |
Dissipation Factor (100 Hz) | 212 | E-4 | IEC 62631-2-1 |
Dissipation Factor (1 MHz) | 460 | E-4 | IEC 62631-2-1 |
Volume Resistivity | >1E13 | Ohm*m | IEC 62631-3-1 |
Electric Strength | 15 | kV/mm | IEC 60243-1 |
Comparative Tracking Index | 600 | V | IEC 60112 |
Value | Units | Test Method / Conditions | |
Water Absorption in Water (at 23°C after 24h) | 0.27 | % | ISO 62 |
Humidity Absorption | 0.11 | % | Sim. to ISO 62 |
Density | 1240 | kg/m³ | ISO 1183 |
Value | Units | Test Method / Conditions | |
Tensile Modulus | 160 | MPa | ISO 527-1/-2 |
Stress at 5% strain | 8.4 | MPa | ISO 527-1/-2 |
Stress at 10% strain | 12 | MPa | ISO 527-1/-2 |
Stress at 50% strain | 17 | MPa | ISO 527-1/-2 |
Stress at 100% strain | 16 | MPa | ISO 527-1/-2 |
Stress at Break | 32 | MPa | ISO 527-1/-2 |
Nominal Strain at Break | 450 | % | ISO 527-1/-2 |
Compression Set Under Constant Strain (at 70°C) | 42 | % | ISO 815 |
Tear Strength | 146 | kN/m | ISO 34-1; Method B |
Shore A Hardness (3s) | 98 | — | ISO 868 |
Shore A Hardness (15s) | 98 | — | ISO 868 |
Shore D Hardness (3s) | 51 | — | ISO 868 |
Shore D Hardness (15s) | 51 | — | ISO 868 |
Value | Units | Test Method / Conditions | |
Melt Volume-Flow Rate (at 230 / * °C, 2.16 / * kg) | 8 | cm³/10min | ISO 1133 |
Regulatory & Compliance
- Certifications & Compliance
Technical Details & Test Data
- Chemical Resistance
Chemical Type Chemical Name Resistance Other Acetic acid (10% by mass) at 23°C resistant Ketones Acetone at 23°C resistant Other Ammonium hydroxide (10% by mass) at 23°C limited resistant, tests necessary to verify Other ASTM 1 at 23°C resistant Other ASTM 3 at 23°C resistant Other Brake fluids (DOT 3/4) at 23°C not resistant Other Calcium chloride (10% by mass) at 23°C limited resistant, tests necessary to verify Other Chloroform at 23°C not resistant Ethers Diethyl ether at 23°C limited resistant, tests necessary to verify Alcohols Ethanol at 23°C limited resistant, tests necessary to verify Other Ethyl Acetate at 23°C limited resistant, tests necessary to verify Other Fuel; Diesel at 85°C resistant Other Hydrochloric acid (10% by mass) at 23°C resistant Other Hydrogen peroxide (30% by mass) at 23°C limited resistant, tests necessary to verify Other Nitric acid (10% by mass) at 23°C resistant Other Phosphoric acid (10% by mass) at 23°C resistant Other Sodium hydroxide (10% by mass) at 23°C resistant Other Sulfuric acid (30% by mass) at 23°C resistant Other Tetrachloroethylene at 23°C limited resistant, tests necessary to verify Hydrocarbons Toluene at 23°C resistant Other Transformer oil at 23°C not resistant Other Trichloroethylene at 23°C not resistant Other Water at 23°C resistant Other Zinc chloride (10% by mass) at 23°C resistant - Dynamic Tensile Modulus (E)-Temperature
- Stress-Strain (TPE)
- Viscosity-Shear Rate
Packaging & Availability
- Packaging Type