Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Polymer Name
- Plastics & Elastomers Functions
- Technologies
Applications & Uses
- Markets
- Plastics & Elastomers End Uses
- Plastics & Elastomers Processing Methods
- Boots and Bellows Application Data
Details
Proven track record at various OEMs for more than 20 years with Arnitel® TPC for inboard and outboard boots, Steering Bellows and Prop Shaft Boots, CVJ and constand velocity joints.Benefits
- Arnitel® TPC allows for 20-40% lighter solutions than rubber and also more cost effective solutions than rubber
- Arnitel® TPC allows for highly reliable solutions due to its high temperature resistance (more temperature resistance than TPV) and its good resistance against chemicals and greases
Properties
- Mechanical Properties
- Thermal Properties
- Other Properties
- Mechanical Properties (Die Cutting)
- Mechanical Properties (TPE)
- Rheological Properties
Value | Units | Test Method / Conditions | |
Charpy Impact Strength (at -30°C) | N | kJ/m² | ISO 179/1eU |
Charpy Notched Impact Strength (at +23°C) | N | kJ/m² | ISO 179/1eA |
Charpy Notched Impact Strength (at -30°C) | N | kJ/m² | ISO 179/1eA |
Izod Notched Impact Strength (at +23°C) | N | kJ/m² | ISO 180/1A |
Izod Notched Impact Strength (at -30°C) | N | kJ/m² | ISO 180/1A |
Value | Units | Test Method / Conditions | |
Melting Temperature (10°C/min) | 212 | °C | ISO 11357-1/-3 |
Glass Transition Temperature (at 10°C/min) | -60 | °C | ISO 11357-1/-2 |
Temperature of Deflection Under Load (0.45 MPa) | 65 | °C | ISO 75-1/-2 |
Value | Units | Test Method / Conditions | |
Density | 1180 | kg/m³ | ISO 1183 |
Value | Units | Test Method / Conditions | |
Stress at Break (normal) | 27 | MPa | ISO 527-1/-2 |
Stress at 5% strain (normal) | 4 | MPa | ISO 527-1/-2 |
Stress at 10% strain (normal) | 6.2 | MPa | ISO 527-1/-2 |
Stress at 50% strain (normal) | 9.3 | MPa | ISO 527-1/-2 |
Stress at 100% strain (normal) | 10.4 | MPa | ISO 527-1/-2 |
Strain at Break (normal) | 760 | % | ISO 527-1/-2 |
Stress at 10% strain (parallel) | 5.5 | MPa | ISO 527-1/-2 |
Stress at 10% strain (parallel) (+100°C) | 3 | MPa | ISO 527-1/-2 |
Tear Strength (normal) | 104 | kN/m | ISO 34-1; Method B |
Tear Strength (parallel) | 91 | kN/m | ISO 34-1; Method B |
Value | Units | Test Method / Conditions | |
Tensile Modulus | 70 | MPa | ISO 527-1/-2 |
Stress at 5% strain | 3.5 | MPa | ISO 527-1/-2 |
Stress at 10% strain | 6 | MPa | ISO 527-1/-2 |
Stress at 50% strain | 11.6 | MPa | ISO 527-1/-2 |
Stress at 100% strain | 15.2 | MPa | ISO 527-1/-2 |
Stress at Break | 16 | MPa | ISO 527-1/-2 |
Nominal Strain at Break | 160 | % | ISO 527-1/-2 |
Shore D Hardness (3s) | 37 | — | ISO 868 |
Value | Units | Test Method / Conditions | |
Melt Volume-Flow Rate (at 230 / * °C, 10 / * kg) | 11 | cm³/10min | ISO 1133 |
Molding Shrinkage (parallel) | 1.5 | % | Sim. to ISO 294-4 |
Molding Shrinkage (normal) | 2.3 | % | Sim. to ISO 294-4 |
Regulatory & Compliance
- Certifications & Compliance
- Quality Standards
Technical Details & Test Data
- Chemical Resistance
Chemical Type Chemical Name Resistance Other Acetic acid (10% by mass) at 23°C resistant Ketones Acetone at 23°C resistant Other Ammonium hydroxide (10% by mass) at 23°C limited resistant, tests necessary to verify Other ASTM 1 at 23°C resistant Other ASTM 3 at 23°C resistant Other Brake fluids (DOT 3/4) at 23°C not resistant Other Calcium chloride (10% by mass) at 23°C limited resistant, tests necessary to verify Other Chloroform at 23°C not resistant Ethers Diethyl ether at 23°C limited resistant, tests necessary to verify Alcohols Ethanol at 23°C limited resistant, tests necessary to verify Other Ethyl Acetate at 23°C limited resistant, tests necessary to verify Other Fuel; Diesel at 85°C resistant Other Hydrochloric acid (10% by mass) at 23°C resistant Other Hydrogen peroxide (30% by mass) at 23°C limited resistant, tests necessary to verify Other Nitric acid (10% by mass) at 23°C resistant Other Phosphoric acid (10% by mass) at 23°C resistant Other Sodium hydroxide (10% by mass) at 23°C resistant Other Sulfuric acid (30% by mass) at 23°C resistant Other Tetrachloroethylene at 23°C limited resistant, tests necessary to verify Hydrocarbons Toluene at 23°C resistant Other Transformer oil at 23°C not resistant Other Trichloroethylene at 23°C not resistant Other Water at 23°C resistant Other Zinc chloride (10% by mass) at 23°C resistant - Stress-Strain (TPE)
Packaging & Availability
- Packaging Type