Products

EB-142HT-1 is unfilled, low viscosity, high temperature resistant epoxy adhesive. It maintains high lap shear strength up to 210°C and has excellent thermal and chemical resistance. It can be used for bonding, coating, and sealing applications where a thin film with high insulating resistance is required, particularly at elevated temperatures. It is recommended for bonding metals, glass, and ceramic substrates.

FLASHBOND™ UV-5402 is a low viscosity, flexible, light curing epoxy adhesive that offers excellent strenth and flexibility for reduced cracking. UV-5402 is low viscosity and high elongation. This product requires direct light exposure during cure. Because of the variability of different UV/LED light sources, it is suggested that the user test and specify intensity and exposure time. This product will cure in the presence of visible light (400-415nm) and can also cure down to 365nm.

EB-155 is an undiluted, unfilled, low viscosity clear epoxy system that exhibits exceptional resistance to impact and thermal shock. This system has low exotherm and long work life. Applications includes, high bond strength adhesive for most similar and dissimilar substrates; LED displays, any fiber optic application. It can also be used for making in-place laminates or for protective coating on metals etc. Also it can be used for semi-rigid, moisture proof, gas tight seals between plastic and metallic or other substrates. This is also recommended for potting devices such as connector shells from which rigid or flexible wires may protrude directly through the epoxy.

EPOXIBOND™ EB-109M-11 is a flexible, two components, low viscosity, clear epoxy adhesive for optical, medical, and semiconductor applications. This long working life adhesive can be cured at room temperature or with moderate heat and provides excellent adhesion to glass, quartz, metals, wood and most plastics.

FLASHBOND™ UV-8300LV is a low viscosity, light curing epoxy adhesive that bonds well to a wide variety of substrates including metals, glass, ceramics and some plastics. This product exhibits good surface wetting and adhesion to glass and many plastics. This product requires direct light exposure during cure. Because of the variability of different UV/LED light sources, it is suggested that the user test and specify intensity and exposure time. This product will cure in the presence of visible light (405nm) as well as down to 365nm. Flashbond UV-8300LV has been tested to and passes ISO-10993-5 for cytotoxicity.

EPOXIBOND™ EB-116 is high strength, structural epoxy adhesive. This tough adhesive has an excellent combination of shear and peel strength. It has also excellent impact and vibration resistance and low temperature flexibility. This high-performance epoxy adhesive exhibits very good physical, thermal, and electrical insulation properties and is excellent for cryogenic applications. It is recommended for bonding glass, metal, ceramics, and engineering thermoplastics. Due to its low viscosity, it can be also used for potting and encapsulating electrical/electronic coponents

FLASHBOND™ UV-8504E is a low viscosity, fast curing, light-curing epoxy adhesive that offers excellent strength wetting properties. UV-8504E cures to a high Tg, rigid polymer with excellent adhesive to metals, ceramics, and glass.This product requires direct light exposure during cure. UV-8504E can cure fully in 30 seconds using optimal cure conditions. Due to the variability of different UV/LED light sources, it is suggested that the user test and specify intensity and exposure time. This product will cures best in the UVA wavelengths (315-365nm). FLASHBOND™ UV-8504E has been tested to and passes ISO-10993-5 standards for cytotoxicity.

EPOXIBOND™ EB-155 is an undiluted, unfilled, low viscosity clear epoxy system that exhibits exceptional resistance to impact and thermal shock. This system has low exotherm and long work life. Applications includes, high bond strength adhesive for most similar and dissimilar substrates; LED displays, any fiber optic application. It can also be used for making in-place laminates or for protective coating on metals etc. Also it can be used for semi-rigid, moisture proof, gas tight seals between plastic and metallic or other substrates. This is also recommended for potting devices such as connector shells from which rigid or flexible wires may protrude directly through the epoxy.

SetWORX 90 is a toughened, high strength, structural epoxy adhesive. This adhesive has an excellent combination of shear and peel strength. It has also excellent impact and vibration resistance and low temperature flexibility. This high performance epoxy adhesive exhibits very good physical, thermal, and electrical insulation properties. It is recommended for bonding engineering thermoplastics, SMC (sheet molding compounds) in aerospace and automotive applications. SetWORX 90 is BPA-Free and non-hazardous for shipping.

FLASHBOND™ UV-3700F is a filled, low shrinkage, light curing epoxy adhesive that offers low CTE and high bonds strength. UV-3700F cures to a high Tg, rigid polymer with excellent adhesive to metals, ceramics, and glass. This filled system is excellent for when low viscosity systems are not ideal. Due to the variability of different UV/LED light sources, it is suggested that the user test and specify intensity and exposure time. This product will cure in the presence of visible light (400- 415nm).

EPOXIBOND™ EB-177 is a low viscosity, high Tg, two part epoxy that can be used for potting, encapsulating, or bonding. It is used highly in the medical, optical, and semiconductor industries.EB-177 has excellent high temperature resistance at 300°C and excellent solvent, chemical, and moisture resistance including gamma rays, autoclave, and ETO. It is an excellent choice for semiconductor applications including capillary under fill or flipchip die attach.

SetWORX™ 411HP is a toughened, high strength, industrial grade structural epoxy adhesive. This adhesive has an excellent combination of shear and peel strength. 411HP is a one component, heat cure, conductive epoxy adhesive. It has also excellent impact and vibration resistance and low temperature flexibility. This high-performance epoxy adhesive exhibits very good physical, thermal, and electrical insulation properties. It is recommended for bonding engineering thermoplastics, SMC (sheet molding compounds) in aerospace and automotive applications.

SetWORX™ 1510 is a fast setting, toughened epoxy adhesive designed for industrial grade applications. This epoxy system has 1:1 mixing ratio by volume & cure fast at room temperature. When cured it is resistant to a wide range of chemicals and solvents, and acts as an excellent electrical insulator. The cured adhesive exhibits high impact resistance and exceptional bond strength. It can be used for bonding glass, metals, woods and some plastics.

SETWORX™ 60 is a toughened, high strength, structural epoxy adhesive. This adhesive has an excellent combination of shear and peel strength. It has also excellent impact and vibration resistance and low temperature flexibility. This high performance epoxy adhesive exhibits very good physical, thermal, and electrical insulation properties.

SetWORX™ 05 is a fast cure, high strength, structural epoxy adhesive. This adhesive has an excellent combination of shear and peel strength. It has also excellent impact and vibration resistance and low temperature flexibility. This high performance epoxy adhesive exhibits very good physical, thermal, and electrical insulation properties. The high performance epoxy provides excellent bond strengths to a wide variety of plastics and metals.