Knowde Enhanced TDS
Identification & Functionality
- Additives Included
- Chemical Family
- Polymer Name
- Plastics & Elastomers Functions
- Technologies
- Product Families
Features & Benefits
- Materials Features
Applications & Uses
- Applications
- Plastics & Elastomers End Uses
- Plastics & Elastomers Processing Methods
Properties
- Color
- Flame Rating
- Mechanical Properties
- Physical Properties
- Thermal Properties
- Electrical Properties
- Rheological Calculation Properties
- Test Specimen Production
- Rheological Properties
- Burn Testing Properties
Value | Units | Test Method / Conditions | |
Tensile Modulus (dry) | 225000 | psi | ISO 527 |
Tensile Modulus (cond.) | 189000 | psi | ISO 527 |
Tensile Strength (dry) | 6530 | psi | ISO 527 |
Yield Stress (dry) | 6530 | psi | ISO 527 |
Yield Stress (cond.) | 5950 | psi | ISO 527 |
Yield Strain (dry) | 4 | % | ISO 527 |
Yield Strain (cond.) | 13 | % | ISO 527 |
Stress at 50% Strain (dry) | 5660 | psi | ISO 527 |
Stress at Break (dry) | 7250 | psi | ISO 527 |
Nominal Strain at Break (ɛtb, dry) | 160 | % | ISO 527 |
Nominal Strain at Break (ɛtb, cond.) | min. 50 | % | ISO 527 |
Charpy Notched Impact Strength (+23°C, dry) | 7.61 | ftlb/in² | ISO 179/1eA |
Charpy Notched Impact Strength (+23°C, cond.) | 5.71 | ftlb/in² | ISO 179/1eA |
Charpy Notched Impact Strength (-30°C, dry) | 4.28 | ftlb/in² | ISO 179/1eA |
Charpy Notched Impact Strength (-30°C, cond.) | 4.76 | ftlb/in² | ISO 179/1eA |
Flexural Modulus (23°C, dry) | 228000 | psi | ISO 178 |
Flexural Modulus (23°C, cond.) | 174000 | psi | ISO 178 |
Flexural Stress at Conv. Deflection (23°C, dry) | 7250 | psi | ISO 178 |
Flexural Stress at Conv. Deflection (23°C, cond.) | 5510 | psi | ISO 178 |
Flexural Strength (23°C, dry) | 8990 | psi | ISO 178 |
Flexural Strength (23°C, cond.) | 7250 | psi | ISO 178 |
Flexural Strain at Flexural Strength (23°C, dry) | 6.5 | % | ISO 178 |
Flexural Strain at Flexural Strength (23°C, cond.) | 8 | % | ISO 178 |
Value | Units | Test Method / Conditions | |
Density (dry) | 1.01 | g/cm³ | 1SO 1183 |
Density (cond.) | 1.01 | g/cm³ | 1SO 1183 |
Water Absorption (dry) | 1.5 | % | Sim. to 1SO 62 |
Humidity Absorption (dry) | 0.7 | % | Sim. to 1SO 62 |
Value | Units | Test Method / Conditions | |
Melting Temperature (dry) | 349 | °F | ISO 11357-1/-3 |
Glass Transition Temperature (dry) | 104 | °F | ISO 11357-1/-2 |
Temperature of Deflection Under Load A (1.80 Mpa, dry) | 122 | °F | ISO 75-1/-2 |
Temperature of Deflection Under Load B (0.45 Mpa, dry) | 230 | °F | ISO 75-1/-2 |
Vicat Softening Temperature A (10 N, 50 K/h, dry) | 352 | °F | ISO 306 |
Vicat Softening Temperature B (50 N, 50 K/h, dry) | 284 | °F | ISO 306 |
Coefficient of Linear Thermal Expansion (23°C to 55 °C, Parallel, dry) | 7.78e-05 | in/in/°F | ISO 11359-1/-2 |
Coefficient of Linear Thermal Expansion (23°C to 55 °C, Normal, dry) | 7.78e-05 | in/in/°F | ISO 11359-1/-2 |
Value | Units | Test Method / Conditions | |
Volume Resistivity (pV, dry) | 10000000000000 | Ohm*m | IEC 62631-3-1 |
Volume Resistivity (pV, cond.) | 3000000000000 | Ohm*m | IEC 62631-3-1 |
Surface Resistivity (σE, cond.) | 1000000000000000 | Ohm | IEC 62631-3-2 |
Relative Permittivity (100Hz, dry) | 3.7 | — | IEC 62631-2-1 |
Relative Permittivity (100Hz, cond.) | 4.8 | — | IEC 62631-2-1 |
Relative Permittivity (1MHz, dry) | 3 | — | IEC 62631-2-1 |
Relative Permittivity (1MHz, cond.) | 33 | — | IEC 62631-2-1 |
Dissipation Factor (100Hz, dry) | 450 | E-4 | IEC 62631-2-1 |
Dissipation Factor (100Hz, cond.) | 700 | E-4 | IEC 62631-2-1 |
Dissipation Factor (1Mhz, dry) | 260 | E-4 | IEC 62631-2-1 |
Dissipation Factor (1Mhz, cond.) | 500 | E-4 | IEC 62631-2-1 |
Electric Strength (AC, S20/S20, t. 1 mm, dry.) | 660 | kV/in | IEC 60243-1 |
Electric Strength (AC, S20/S20, t. 1 mm, cond.) | 914 | kV/in | IEC 60243-1 |
Comparative Tracking Index (Test Solution A, 50 Drops Value, cond.) | 600 | — | — |
Value | Units | Test Method / Conditions | |
Density of Melt | 53.7 | Ib/ft³ | — |
Thermal Conductivity of Melt | 1.39 | BTU in/(hr ft² °F) | — |
Specific Heat Capacity Melt | 1.13 | BTU/(Ib-F) | — |
Ejection Temperature | 338 | °F | — |
Minimum Mold Temperature | 86 | °F | — |
Maximum Mold Temperature | 212 | °F | — |
Minimum Melt Temperature | 428 | °F | — |
Maximum Melt Temperature | 500 | °F | — |
Value | Units | Test Method / Conditions | |
Injection Molding - Melt Temperature | 464 | °F | ISO 294 |
Injection Molding - Mold Temperature | 140 | °F | ISO 294 |
Injection Molding - Injection Velocity | 7.87 | in/s | ISO 294 |
Injection Molding - Pressure at Hold | 10200 | psi | ISO 294 |
Value | Units | Test Method / Conditions | |
Melt Volume Flow Rate (dry, at 446°F, 11lb) | 6 | cm³/10min | ISO 1133 |
Molding Shrinkage (Parallel, dry) | 0.6 | % | ISO 294-4, 2577 |
Molding Shrinkage (Normal, dry) | 1.3 | % | ISO 294-4, 2577 |
Mold Temperature (dry) | 140 | °F | — |
Melt Temperature (dry) | 464 | °F | — |
Value | Units | Test Method / Conditions | |
Burning Behavior (at 1.5 mm Nominal Thickness) (dry) | HB | class | IEC 60695-11-10 |
Burning Behavior (at Thickness 0.1260 in.) (dry) | HB | class | IEC 60695-11-10 |
Storage & Handling
- Shelf Life
- 2 years
- Storage Conditions
Inside the original and undamaged packaging, the product has a shelf life of at least 2 years when stored in dry rooms at temperatures not exceeding 30°C.