Products

ZEOFREE® 5162 is a finely milled, hydrophilic silica. It is primarily used as a free-flow agent in other applications. ZEOFREE® 5162 can also be used in-situ hydrophobized in defoamers. The use of an alkaline catalyst is recommended.

AEROSIL® R 202 is a hydrophobic fumed silica grade, treated with a polydimethylsiloxane. This product can be used in defoamer formulations for sedimentation stabilization and due to its high hydrophobicity as defoaming component.

SIPERNAT® D 10 is a milled hydrophobic (i.e., not wettable by water) silica. It is used in a great variety of defoamers due to its high effectiveness and ease of dispersion.

SIPERNAT® 50 S is a hydrophilic, finely milled silica. Besides its application as flow aid and highly effective anticaking agent it also may serve as carrier of especially high absorptive capacity in case particle fineness is required.

ZEOFREE® 5161 is a hydrophilic, coarse silica combining a high absorptive capacity with a good flowability. It is well suited to transform any type of liquid, including defoamers, into dry, free flowing powder concentrates.

AEROSIL® 200 is a hydrophilic fumed silica with a specific surface area of 200 m²/g.

AEROSIL® R 812 S is hydrophobic fumed silica grade treated with HMDS (Hexamethyldisilazane). It is even more hydrophobic than AEROSIL® R 812 and convenient for stabilizing a defoamer and well suitable as a component of foam control agents.

AEROSIL® R 972 is hydrophobic fumed silica grade treated with DDS (Dichlordimethylsilane). The moderate hydrophobicity of these AEROSIL® products is suited for defoaming properties in the presence of appropriate hydrophobic liquids. They are recomended for improving the sedimentation stability of defoamer dispersions as well.

SIPERNAT® D 13 is a milled, hydrophobic (i.e., not wettable by water) silica, high methanol wettability and low surface. It is used in a great variety of technical defoamers due to its high effectiveness and ease of dispersion.

SIPERNAT® 500 LS is a very finely ground silica with high surface area, low drying loss and particulary high absorbency.

SIPERNAT® 823 is a finely milled, hydrophilic sodium aluminum silicate. It is primarily used as a free-flow agent in other applications.

AEROSIL® R 974 is hydrophobic fumed silica grades treated with DDS (Dichlordimethylsilane). The moderate hydrophobicity of these AEROSIL® products is suited for defoaming properties in the presence of appropriate hydrophobic liquids. They are recommended for improving the sedimentation stability of defoamer dispersions as well.

VERSALINK® P 250 is an oligomeric diamine curative that exists as a waxy solid at room temperature. It can be easily mixed, cast, and cured at ambient temperatures. This product serves as a curative for different diisocyanates and their prepolymers. Furthermore, it can function as a modifier for amine or anhydride-cured epoxies, enhancing their flexibility.

AEROSIL® R 208 is a fumed silica aftertreated with polydimethylsiloxane with excellent thickening properties.

SIPERNAT® 50 is a hydrophilic, coarse silica with the highest absorptive capacity and a high surface area. It is capable of transforming any liquid solution, water- or oil-based systems into dry powder concentrates of up to 75%.

SIPERNAT® 22 S is a finely milled, hydrophilic silica. It is primarily used as a free-flow agent in other applications. SIPERNAT® 22 S can also be used in-situ hydrophobized in defoamers. The use of an alkaline catalyst is recommended.

SIPERNAT® 22 is a hydrophilic, coarse silica combining a high absorptive capacity with a good flowability. It is well suited to transform any type of liquid, including defoamers, into dry, free flowing powder concentrates.

SIPERNAT® 28 is a very finely milled, hydrophilic silica. It is primarily used as a thickening or free-flow agent in other applications.

AEROSIL® 300 is a hydrophilic fumed silica with a specific surface area of 300 m²/g.

ZEOFREE® 80 is a finely milled, hydrophilic silica. It is primarily used as a free-flow agent in other applications. ZEOFREE® 80 can also be used in-situ hydrophobized in defoamers. The use of an alkaline catalyst is recommended.

VERSALINK® P 2000 is an oligomeric diamine that is in the form of a waxy solid at room temperature. It serves as a curative for different diisocyanates and their prepolymers. Additionally, it can be utilized as a modifier for amine- or anhydride-cured epoxies to improve flexibility. Moreover, when blended with other VERSALINK® oligomeric diamines, it can achieve a liquid state at room temperature.

TEGO® Cycle CP 320 is an organo-modified siloxane that is used as a processing additive, compatibilizer, and for permanent modification of polymer properties. It is particularly suitable for recycled polymers, as it can be used to compatibilize PE in PP, PP in PE, and PA in polyolefins. TEGO® Cycle CP 320 is ideal for producing automotive parts, electronic appliances, packaging materials, consumer goods, and oriented packaging straps. Its use provides several advantages for specific applications, including improved mechanical performance, better weld line strength, and prevention of stress cracking and whitening. It also improves mold release properties, reduces manual interventions, and allows for more exact reproduction of surface structure, resulting in shorter cycle times.

TEGO® Sorb PY 88 TQ is a zinc ricinoleate-based odor absorber that operates on the key and locker principle, specifically designed for odor control. This product is not intended to impart flavor. It finds application in the production of masterbatches and compounds, where it excels at absorbing unwanted odors.

SIPERNAT® 340 is a medium sized silica with spherical particles and high oil absorption capacity (DBP). Is less dusty than small particle size flow agents, yet still gives good free flow improvement performance.

SIPERNAT® 22 LS is a very finely milled, hydrophilic silica. It is primarily used as a free-flow agent in other applications.

TEGO® CYCLE CP 310 is an organo-modified siloxane that is used as a processing additive, compatibilizer, and for permanent modification of polymer properties. Its use provides several advantages for specific applications. It reduces gelling, resulting in lower failure rates, reduces pressure, increases throughput, and prevents melt fracture and shark skin effect. It also reduces surface roughness. TEGO® CYCLE CP 310 shortens cycle times, prevents cut propagation in oriented tapes and films, and improves mechanical performance, including notched impact strength and elongation at break. It also prevents stress cracking and whitening.