Products

Exolon® Multi UV IQ-Relax are opal white sheets, which dramatically reduce the heat of the sunlight, allowing the visible light to pass through. They have a built-in intelligence system that automatically adjusts to ambient conditions. Exolon® multi IQ-Relax gives comfort and enables you to lean back in your conservatory with a pleasant and unique relax feeling.

Exolon® AR sheet is an abrasion and enhanced UV resistant polycarbonate sheet that offers glasslike hardness coupled with the impact strength of standard polycarbonate. Exolon® AR has a 10-years warranty against breakage and 7-years warranty against delamination and weathering.

Exolon® Multi UV 2/4-8 is a range of heat-insulating multiwall sheets. Their insulating characteristic can be increased, doubled, tripled or quadrupled by the number of ribs. Single surface protection offers the advantage of making the Exolon® multi UV sheets UV and weathering-resistant. Even hail has no impact on this resistant material. The sheets can be cold-bent.

Exolon® Med sheets are clear, polished polycarbonate sheets made out of resin which meets ISO 10993/ USP Class VI biocompatibility requirements. They offer extreme impact strength that exceeds the physical properties of other products of their class. Exolon® Med sheets resist temperatures of -100 to +120 °C, exhibit high optical clarity. Exolon® Med sheets can be thermoformed, cold-curved and machined with ease.

Exolon® multi UV HX/25-32 is a polycarbonate sheet of 25 mm thickness, with a Hybrid-X-structure for enhanced stiffness. It combines good load bearing properties, good thermal insulation, light transmission and excellent weather resistance. The sheet is lightweight, impact resistant and easy to install. The sheets are produced with a coextruded UV-protective layer, which is homogeneously fused with the sheet material. This UV-protected side must be installed facing upwards/outwards. It provides Exolon® multi UV with a highly effective protection against weathering, guaranteed for 10 years.

Exolon® multi UV no drop multiwall sheets offer a no-drop, water-spreading surface on one side. The coating on the inner side of the sheets means that condensation is distributed evenly over the sheet like a film. The water that gathers runs off; there is no annoying formation of drops, and optical refraction is not impeded. The sheets can be cold-bent.

Exolon® multi UV 5X/16-25 is a 5-wall polycarbonate sheet of 16 mm thickness, with an X-structure for enhanced stiffness. It combines high light transmission, good load bearing properties, good thermal insulation and excellent weather resistance. The sheet is lightweight, impact resistant and easy to install. The sheets are produced with a coextruded UV-protective layer, which is homogeneously fused with the sheet material.This UV-protected side must be installed facing upwards/outwards. It provides Exolon® multi UV with a highly effective protection against weathering, guaranteed for 10 years.

Exolon® FR sheets are flame retardant polycarbonate sheets. They offer extreme impact strength that exceeds the physical properties of other products of their class. Exolon® sheets resist temperatures of -100 to +120 °C and exhibit high optical clarity. Exolon® FR sheets have excellent fire ratings. They are UL94-V0 rated as of 2 mm thickness & comply with EN 45545-2 (European fire standard for rail applications) requirement R4, R22, R23 and R24 and meet FAR 25.853 (a)(1)(i). Exolon® FR sheets are the perfect choice for a long service life because of their good material performance.

Exolon® Silent Sound sheets are clear, polished, UVstabilized polycarbonate sheets and available as extended UV and Abrasion-resistant AR (anti graffity like)/ Bird friendly BF version. They offer extreme impact strength that exceeds the physical properties of other products of their class. Exolon® sheets resist temperatures of -100 to +120 °C, exhibit high optical clarity and have a good fire rating. Exolon® Silent Sound sheets meet the sound technical requirements for noise reduction and the demands of road and railway safety, stability such as form and aging stability. Exolon® Silent Sound UV can be bent cold and also manufactured flat. Furthermore Exolon® Silent Sound sheets can be thermoformed, cold-curved and machined with ease.

Exolon® GP stands for solid polycarbonate sheets. Their high transparency and smooth surface make them an attractive material for a wide range of applications. They offer extreme impact resistance, even at temperatures down to -100°C. The polycarbonate sheets can be thermoformed and cold-bent and are easy to process.

Exolon® multi UV 2/16-30 is a twinwall polycarbonate sheet with a thickness of 16 mm. It combines a high level of light transmission with thermal insulation and excellent weather resistance. The sheet is lightweight, impact-resistant and easy to install. The sheets are produced with a coextruded UV-protective layer on both sides, which is homogeneously fused with the sheet material. It provides Exolon® multi UV 2/16-30 with a highly effective protection against weathering, guaranteed for 20 years.

Exolon® UV ClimateControl is a transparent polycarbonate sheet with a protective UV coating on both sides. The sheets substantially reduce high temperatures caused by sunlight as they block out the majority of infrared light. It is extremely resistant to permanent environmental impacts and has a long service life. The maximum permissible temperature for long-term use in the absence of loads is in the region of 120°C. An additional benefit, is that the sheets come with a 10-year warranty on weather resistance, transparency and breaking strength.

Exolon® UV Patterned Polycarbonate Sheet sheets are made from clear-transparent polycarbonate sheets with UV protection on both sides. They are the perfect choice for a long service life owing to their good weathering resistance. These attributes are backed up by our 10-year guarantee on weathering resistance and a 10-year guarantee on retaining their mechanical properties.

Exolon® Multi UV 7-wall is a 7-wall polycarbonate sheet of 16 mm thickness. It combines high light transmission, excellent thermal insulation and excellent weather resistance. The sheet is lightweight, impact resistant and easy to install. The sheets are produced with a coextruded UV-protective layer, which is homogeneously fused with the sheet material.This UV-protected side must be installed facing upwards/outwards. It provides Exolon® multi UV with a highly effective protection against weathering, guaranteed for 10 years.

Exolon® multi UV 7M/20-28 is a polycarbonate sheet of 20 mm thickness, with a M-structure for enhanced stiffness. It combines good load bearing properties, excellent thermal insulation, light transmission and excellent weather resistance. The sheet is lightweight, impact resistant and easy to install. The sheets are produced with a coextruded UV-protective layer, which is homogeneously fused with the sheet material. This UV-protected side must be installed facing upwards/outwards. It provides Exolon® multi UV with a highly effective protection against weathering, guaranteed for 10 years.

Exolon® GP Eco sheets are clear, polished polycarbonate sheets which contain a fixed percentage of own reclaimed content. They offer extreme impact strength that exceeds the physical properties of other products of their class. Exolon® sheets resist temperatures of -100 to +120 °C, exhibit high optical clarity and have a good fire rating.

Exolon® WS - Welding Shield sheets are polycarbonate sheets which comply with requirements for transparent screens in arc welding processes. They protect against the hazardous radiation emitted during arc welding processes and meet the requirements on light transmission, UV-stability and fire resistance specified in EN ISO 25980: 2014. The sheets are available in different colors. Exolon® WS sheets offer extreme impact strength that exceeds the physical properties of other products of their class. They resist to temperatures of -100 to +120°C.

Exolon® Titan sheets are clear, polished polycarbonate sheets. They offer extreme impact strength that exceeds the physical properties of other products of their class. Exolon® sheets resist temperatures of -100 to +120 °C, exhibit high optical clarity and have a good fire rating. The sheets offer protection against involuntary breakage and wilfull destruction. Exolon® Titan sheets can be thermoformed, cold-curved and machined with ease.

Exolon® multi UV 5M/25-20 is a polycarbonate sheet of 25 mm thickness, with a M-structure for enhanced stiffness. It combines good load bearing properties, good thermal insulation, light transmission and excellent weather resistance. The sheet is lightweight, impact resistant and easy to install. The sheets are produced with a coextruded UV-protective layer, which is homogeneously fused with the sheet material. This UV-protected side must be installed facing upwards/outwards. It provides Exolon® multi UV with a highly effective protection against weathering, guaranteed for 10 years.

Exolon® UV sheets are made from clear-transparent polycarbonate sheets with UV protection on both sides. They are the perfect choice for a long service life owing to their good weathering resistance. These attributes are backed up by a 10 year guarantee on weathering resistance and a 10 year guarantee on retaining their mechanical properties.

Exolon® Vista QX sheets are clear, polished polycarbonate sheets with enhanced optical properties. They offer extreme impact strength that exceeds the physical properties of other products of their class. Exolon® Vista QX sheets resist temperatures of -100 to +120 °C, exhibit high optical clarity and have good fire properties. The sheets offer protection against involuntary breakage and willful destruction. Exolon® Vista QX sheets can be thermoformed, cold-curved and machined with ease.