Products

ISO 1040A is a one-part, high-performance binder-adhesive for bonding EPDM/Rubber granules to a variety of substrates including foam, concrete, fiberglass, and wood. Surfaces produce a non-slip, pond-free, soft floor decking.

ISO 800A is a one-part dark brown binder-adhesive for bonding dark rubber granules to a variety of substrates such as foam, concrete, fiberglass, wood, and so on. Surfaces produce a non-slip, pond-free, soft floor decking.

BC 575 is a single component package, elastomer coating designed to be applied directly to mold surfaces as an in-mold coating (IMC) for part enhancement and mold protection in single or multiple coat applications. BC 575 is also recommended for in-mold applications that require rapid release and mold protection from high temperature exotherms. Because of its excellent color stability, BC 575 is ideal for concealing the extremely rapid yellowing characteristics of low-cost polymer systems used in the production of molded goods.

URS 4175 is a high modulus, medium viscosity polyether-based structural spray urethane system with good rigidity and excellent impact resistance at a 1 to 1 by volume mix ratio. URS 4175 is recommended for applications requiring stiffness and impact resistance in a quick set spray system, such as artificial rock formations, ceiling panels, spa walls, foam backing, Styrofoam coatings, and so on.

ADH 1020 is a one-coat primer and adhesive that can be used to bond elastomers to cured urethane or vulcanized rubber. Water, salt spray, many solvents, and other environmental conditions do not affect bonds.

ADH 1001 is a one-coat adhesive designed to bond castable and millable urethane elastomers to metals and other rigid substrates. Water, salt spray, many solvents, and other environmental conditions are not a problem for ADH 1001 bonds.

URS 1560 is a clear, one-component, non-yellowing urethane coating that can be applied directly to surfaces as a sealer / surfacer in single or multiple coat applications. URS 1560 is recommended for applications requiring high abrasion and chemical resistance, such as floor and deck coating, masonry sealer, and so on.

ADH 1200 is a two component, 100% solids urethane adhesive designed for bonding urethane foam or PE foam to each other or to concrete when used in conjunction with PRI 1050. With good flexibility and excellent resistance to most chemicals and water ADH1200 is ideal for water park and dry play articles.