Products

Ottopol SX-30 is a self-crosslinking acrylic emulsion for flexo or gravure printed films. This translucent emulsion polymer exhibits resistance to alkalis and solvents, such as diluted alcohol solutions. It has excellent adhesion to substrates and provides excellent resolubility properties when applied.

Ottopol S-50 is an acrylic emulsion polymer with good adhesion to vinyl and other non-porous surfaces. It provides excellent resolubility properties for flexo and gravure printing applications, and the flow and leveling characteristics provide a high gloss finish. This resin also has non-curling properties.

Ottopol SX-75 is a self-crosslinking acrylic emulsion with good gloss for flexo and gravure printing. This product has alkali resistance and exceptionally good adhesion to vinyl and other non-porous substrates. Due to the internal cross-linking mechanism, it also has improved block and scuff resistance.

Ottopol S-75 is a film-forming acrylic emulsion polymer that is suitable for inks and coatings on paper and board. This product has good adhesion to vinyl and other non-porous substrates that require a hard film. It also provides excellent resolubility properties, a high-gloss finish, and non-curling properties.

Ottopol SX-100 is a self-crosslinking acrylic emulsion for alkali resistance. This product has exceptionally good adhesion to substrates and is non-film-forming for glossy flexo and gravure inks. Due to the internal cross-linking mechanism, it also has improved block and scuff resistance.

Ottopol S-100 is a non-film-forming emulsion polymer for glossy flexo and gravure inks. This product has exceptionally good adhesion to vinyl and other non-porous substrates and provides non-curling properties. It has improved flow and leveling characteristics, which provide a high gloss finish.

Ottopol S-30 is an acrylic emulsion with a low glass transition temperature of -20°C. It is used for adhesion to plastic films, vinyl, and other non-porous substrates that require a hard film. This product is suitable for flexo or gravure printing applications.

Ottopol 25-50E converts into a low-cost solution polymer for pigment grinding and high-gloss flexo and gravure inks. Belonging to the Ottopol 25 Series, it is specifically designed for use as a grinding and letdown vehicle for water-based rotogravure and flexographic inks. It provides high gloss and excellent press stability. Ink and coating makers will benefit from the versatility of this series as a sole binder or component of high-gloss inks and overlay varnishes. These polymers are derived from the same monomer composition, and the dry resin is identical throughout the series.

Ottopol K-23 is a cationic acrylic copolymer emulsion used for alkali resistance and adhesion to non-porous substrates. It is designed for use as a grinding and letdown vehicle for water-based flexographic and rotogravure inks. It is also suitable for use as an overprint varnish.

Ottopol 25-30 is the ammonia-cut version of Ottopol 25-50E. This solution polymer has good adhesion to non-porous surfaces. Belonging to the Ottopol 25 Series, it is specifically designed for use as a grinding and letdown vehicle for water-based rotogravure and flexographic inks. It provides high gloss and excellent press stability. Ink and coating makers will benefit from the versatility of this series as a sole binder or component of high-gloss inks and overlay varnishes. These polymers are derived from the same monomer composition, and the dry resin is identical throughout the series.