Products

Genesee Polymers' GP-670 SILICONE RESIN SOLUTION is an Ethyl Alcohol -based solution of Methyl Silicone Resin. The resin forms a solid release coating when GP-670 SILICONE RESIN SOLUTION is applied to substrates and solvent is allowed to evaporate. Film formation occurs at room temperature and results in a durable, weather resistant, non-stick surface after solvent evaporation, which normally occurs within a few minutes.Best performance is attained when GP-670 is applied to substrates by spraying, making sure that a wet continuous film covers the substrate, followed by allowing the carrier solvent to evaporate. Some additional improvement in durability will occur, in mold release applications when the treated mold is heated to 80 -100C, for one hour prior to beginning molding operation.GP-670 SILICONE RESIN SOLUTION is suggested for use in a variety of applications, including masonry water repellents, leather and fabric treating agents, mold release formulations and as a binder for high temperature application paints and coatings

Genesee Polymers' GP-367 MERCAPTO FUNCTIONAL SILICONE FLUIDisa dimethyl silicone copolymer fluid, containing mercaptopropyl sidechains in addition to the conventional methyl group substituents. The structure of GP-367 is as follows where x= 36 and y = 6:

Genesee Polymers' GP-316 AMINE FUNCTIONAL SILICONE FLUID is an amine functional silicone polymer with the following structure where x= 400 and y = 8. he amine-alkyl functionality of GP-316 AMINE FUNCTIONAL SILICONE FLUID provides a versatile reaction site for the synthesis of a wide variety of silicone -organic copolymers, whichmay be tailored for usein textiles, coatings, car polishes and many other applications. The presenceof polar amine groups also gives greater affinity to many substrates, suggesting uses of GP-316in lubricant, coating and mold release formulations.GP-316 AMINE FUNCTIONAL SILICONE FLUIDiscompatible with dimethyl silicone fluids and with aliphatic, aromaticand chlorinated hydrocarbon solvents.

Genesee Polymers' GP-6 SILICONE FLUID is an amine functional silicone polymer with the following structure where x = 100 and y = 4: The amine-alkyl functionality of GP-6 provides a versatile reaction site for the synthesis of a variety of functional silicone polymers and silicone-organic copolymers. The polar amine groups in GP-6 SILICONE FLUID also demonstrate high affinity for many substrates, suggesting use of GP-6 in textile lubricants, plastic and rubber release and lubrication, and in car polish formulations. GP-6 SILICONE FLUID is compatible with dimethyl silicone fluids, and with aliphatic, aromatic and chlorinated solvents.

Genesee Polymers' GP-422 SILICONE RESIN SOLUTION is a concentrated mixture of a reactive, further curable silicone resin in an octamethylcyclotetrasiloxane carrier. GP-422 forms a continuous solid resin film, when applied to substrates and allowed to air dry. Curing to a solvent resistant coating takes place over a prolonged time period at room temperature, but may be accelerated by heating at 200°C for one hour.GP-422 is suggested for use as a binder in coatings intended for application to substrates exposed to high temperatures, and as a component of masonry water-repellent formulations.

Genesee Polymers' GP-34 SILICONE FLUIDis an amine end-blocked silicone fluid with the following structure where x= 400 –450: The combination of amino-propyl and methoxy functional groups in GP-34provides a rapid cross-linking reaction when the product is GPosed to atmospheric moisture. Suggested uses for GP-34 SILICONE FLUID include applications in room temperature curing sealants, coatings and adhesives. If optimum elastomeric properties are needed, silica or other reinforcing fillers may be required.

Genesee Polymers' GP-533 is a 100% active organic modified silicone polymer. This product is recommended for use as a mold release agent and internal lubricant for plastics.

Genesee Polymers' GP-187 SILICONE RESIN SOLUTION is an Isopropyl Alcohol -based solution of Methyl Silicone Resin. The resin cures to a soft, pliable consistency when GP-187SILICONE RESIN SOLUTION is applied to substrates and solvent is allowed to evaporate. Heating at elevated temperatures (100C or higher) accelerates curing reactions, yielding a clear, hard resin film.GP-187 SILICONE RESIN SOLUTION is suggested for use in a variety of applications, including masonry water repellents, leather and fabric treating agents, mold release formulations and as a binder for high temperature application paints and coatings.

Genesee Polymers' GP-596 is a 28% active epoxy functional silicone polymer in solution. The epoxy functionality in GP-596 allows for rapid cross-linking with standard amine curing agents. Selecting the proper curing agent is dependent on application techniques, pot life requirements, cure conditions and physical properties needed.Cured coatings formed from GP-596exhibit greater elongation, higher impact resistance and more flexibility, than coatings formed from standard bisphenol A type resins. This increased flexibility allows for greater adhesion to coated surfaces, resulting in improved durability.In addition to the tough coating properties of GP-596, the presence of the unique silicone-epoxy copolymer imparts non-stick and rust inhibiting characteristics as well. This strongly suggests applications involving protection of ferrous and nonferrous metals exposed to extreme abrasion conditions, or corrosive atmospheres.GP-596may be formulated with pigments, thickeners, dispersants and other additives as needed to yield finished coatings. The technology of formulating is closely related to standard epoxy resin coatings applications.

Genesee Polymers' GP-4 SILICONE FLUID is an amine functional silicone polymer with the followingstructurewhere x = 58 and y = 4:The amine-alkyl functionality of GP-4 SILICONE FLUID provides a versatile reaction site for the synthesis of a wide variety of silicone/organic copolymers, which may be tailored for use in textiles, coatings, car polishes and many other applications. The presence of polar amine groups also gives greater affinity to many substrates, suggesting use of GP-4in lubricant, coating and mold release formulations.GP-4 SILICONE FLUIDis compatible with dimethyl silicone fluids and with aliphatic, aromatic and chlorinated hydrocarbon solvents.

Genesee Polymers' GP-71-SS SILICONE FLUID is a dimethyl silicone copolymer fluid, containing mercaptopropyl side chains in addition to the conventional methyl group substituents. The structure of GP-71-SS is as follows where x = 83 and y = 2:

Genesee Polymers' GP-581 SILICONE FLUID is an amine functional silicone polymer with the following structure where x = 118.5 and y = 11: The amine-alkyl functionality of GP-581 SILICONE FLUID provides a versatile reaction site for the synthesis of a wide variety of silicone-organic copolymers, which may be tailored for use in textiles, coatings, car polishes and many other applications. The presence of polar amine groups also gives greater affinity to many substrates, suggesting uses of GP-581 in lubricant, coating and mold release formulations.GP-581 SILICONE FLUID is compatible with dimethyl silicone fluids and with aliphatic, aromatic and chlorinated hydrocarbon solvents.

Genesee Polymers' GP-58 is a 100% active organic silicone wax copolymer. This unique product is recommended for use as a lubricant, mold release agent and internal lubricant for plastics. When combined with aliphatic solvents, such as mineral spirits, GP-58 forms a dry, colorless film on substrates. This film is stable and will not break down in the presence of water. The lack of any dimethyl silicone removes the problems of orange peel, fisheyes, or similar effects normally associated with dimethyl silicone.

Genesee Polymers' GP-710 MERCAPTO FUNCTIONAL SILICONE FLUID is a high viscosity dimethyl silicone copolymer fluid, containing mercaptopropyl sidechains in addition to the conventional methyl group substituents.

Product Information GP-344 SILICONE FLUID Genesee Polymers' GP-344 SILICONE FLUID is an amine functional silicone polymer with the following structure where x = 200 and y = 2: The amine-alkyl functionality of GP-344 SILICONE FLUID provides a versatile reaction site for the synthesis of a wide variety of silicone/organic copolymers, which may be tailored for use in textiles, coatings, car polishes and many other applications. The presence of polar amine groups also gives greater affinity to many substrates, suggesting uses of GP-344 in lubricant, coating and mold release formulations. GP-344 SILICONE FLUID is compatible with dimethyl silicone fluids and with aliphatic, aromatic and chlorinated hydrocarbon solvents.

Genesee Polymers' GP-219 SILICONE POLYOL COPOLYMER is a 100% active polyoxyethylene modified dimethylpolysiloxane block copolymer.GP-219 is not water soluble because of the low content of polyoxyethylene in the copolymer. The indicated value of HLB (Hydrophile/Lipophile Balance) of 8.4 suggests use of GP-219 as an emulsifier for water in oil emulsions (w/o), or as a pigment dispersant for thermoplastics or solvent-based coatings.GP-219 SILICONE POLYOL COPOLYMER contains no reactive functional groups and is chemically inert. The silicone and polyoxyethylene block polymer components of GP-219 are joined through Silicon to Carbon bonds, insuring resistance to breakdown through hydrolysis.

Genesee Polymers' GP-654 AMINE FUNCTIONAL SILICONE FLUID is an aminoalkyl terminated dimethyl silicone polymer with the following structure where x = 92: GP-654 is listed on the U.S. E.P.A. Toxic Substances Control Inventory as Aminopropyl Terminated PolyDimethylsiloxane (CAS# 106214-84-0).

Genesee Polymers' GP-532 SILICONE EMULSION is a stable emulsion of an ultra high viscosity hydroxyl terminated dimethyl silicone polymer. GP-532 contains 35% by weight silicone polymer, along with non-ionic and anionic emulsifiers, allowing stable dilutions in both hard and soft water. GP-532 is especially well suited for use as an ingredient in formulations intended for rubber or plastic lubrication. The reactive hydroxyl functionality also provides a method of curing applied coatings, suggesting applications in fiber and textile treatments. GP-532 contains no solvent or volatile organic compounds, containing only water as a carrier.

Genesee Polymers’GP-690 ABA SILICONE POLYOL COPOLYMER is a 100% active non-ionic silicone polyol block copolymer with the following structure: P-690 contains polyoxyethylene blocks and dimethyl silicone polymer blocks, which are joined through non-hydrolyzable silicon to carbon bonds.GP-690 ABA SILICONE POLYOL COPOLYMER is designed to function as an emulsifier, wetting agent and profoaming additive for a variety of applications including: polyurethane foams, hard surface cleaners and polishes, and cosmetic formulations.GP-690 contains a primary hydroxyl group at each end of the molecule, allowing for reaction with isocyanates in polyurethane resin systems. This is expected to improve flow and leveling of polyurethane coatings and impart non-stick characteristics to the cured coatings.In textile applications, GP-690 is suggested as a fiber lubricant where more thermal stability is needed than is provided by organic lubricants such as stearates or mineral oils.GP-690is soluble in lower alcohols (EtOH, IPA) and dispersible in water, along with aliphatic and aromatic hydrocarbons.

Genesee Polymers' GP-179 SILICONE RESIN is a 100% active ethoxy-functional methyl silicone resin, which is suggested for evaluation, as a reactive intermediate, in the synthesis of silicone-organic copolymers for protective coatings.GP-179 will slowly undergo hydrolysis and condensation to a cured resin film when exposed to atmospheric moisture, providing a water repellent protective coating for wood, masonry and metal substrates.When required, GP-179 SILICONE RESIN may be diluted with aliphatic or aromatic hydrocarbon solvents, or with dry alcohols, esters or other solvents.

Genesee Polymers' GP-226 SILICONE POLYOL COPOLYMER is a 100% active polyoxyethylene modified dimethylpolysiloxane block copolymer.GP-226 is water-dispersible and resistantto breakdown by hydrolysis due to the presence of stable ≡ Si –C ≡ bonds between silicone and polyol block sections. GP-226 SILICONE POLYOL COPOLYMER is recommended for use as a wetting agent oremulsifier in water-based coatings, inks, polishes and hard surface cleaners. Additionally, GP-226 may be used as a dispersing agent for the incorporation of clays, pigments and other powders in water.

Genesee Polymers' GP-342 SILICONE FLUID is an amine functional silicone polymer with the following structure where x= 400 and y = 1:The amine-alkyl functionality of GP-342 SILICONE FLUID provides a versatile reaction site for the synthesis of a wide variety of silicone/organic copolymers, which may be tailored for use in textiles, coatings, car polishes and many other applications. The presence of polar amine groups also gives greater affinity to many substrates, suggesting uses of GP-342 in lubricant, coating and mold release formulations.GP-342 SILICONE FLUID is compatible with dimethyl silicone fluids and with aliphatic, aromatic and chlorinated hydrocarbon solvents.

Genesee Polymers' GP-527 SILICONE EMULSION is a stable emulsion of a high viscosity hydroxyl terminated dimethyl silicone polymer. GP-527 contains 35% by weight silicone polymer, along with non-ionic and anionic emulsifiers, allowing stable dilutions in both hard and soft water. GP-527 is especially well suited for use as an ingredient in formulations intended for rubber or plastic lubrication. The reactive hydroxyl functionality also provides a methodof curing applied coatings, suggesting applications in fiber and textile treatments. GP-527 contains no solvent or volatile organic compounds, containing only water as a carrier.