Products

Harcros Chemicals Antifoam 100 Food Grade is a 100% active silicone compound that provides an efficient and economical means of preventing costly and dangerous foaming conditions in aqueous and non-aqueous systems. It can be used in the manufacture of food packaging materials and as a direct food additive. This product exhibits excellent dilution stability when diluted with aliphatic, aromatic, and chlorinated solvents.

T-Det® XH is a polyalkalene glycol monobutyl ether surface active agent primarily used as an emulsifier and dispersing agent in a variety of industrial applications. It can be used as a pigment, paper coating, and polymer dispersant, as well as a binder and surfactant in powdered products due to its high freeze point. Additionally, it is classified as an intermediate in the manufacturing of iodophors for germicidal cleaners.

Harcros Chemicals Antifoam 10 Food Grade is a 10% antifoam emulsion of polydimethylsiloxane designed for defoaming aqueous systems. It is exceptionally easy to dilute and disperse. This product maintains its effectiveness at temperatures up to boiling. Although designed primarily for food applications, it can also be used in many industrial processes. For effective defoaming, concentrations ranging from 10 to 100 ppm are required.

H-Sil® OE is a silicone-based odor eliminator designed for industrial and consumer applications. This product acts as an odor eliminator by neutralizing the nitrogen groups that are present in most odors. It is a concentrate that can be diluted at 5 - 10% by weight in water for most applications. No other additives are needed. Fragrances can be added to the dilution by using common surfactants and fragrance bases. 5% dilutions of H-Sil® OE were successfully compared against leading industrial and consumer products via a test panel, and it consistently outlasted the competitors. At a use level of 5 - 10%, this product was successfully tested against the following odors:

• Smoke
• Butyric acid (body odor)
• Amine odors
• Urine
• Ammonia

T-Det® A 136 is an anhydrous liquid surface-active agent produced by the reaction of tridecyl alcohol with 6 moles of ethylene oxide. Its nonionic structure makes it compatible with anionic surfactants and it is stable in the presence of acids, bases, and salts.

T-Det® A 138 is an anhydrous liquid surface-active agent produced by the reaction of tridecyl alcohol with 8 moles of ethylene oxide. Its nonionic structure makes it compatible with anionic and cationic surfactants, and it is stable in the presence of acids, bases, and salts.

T-Det® N 7 is an anhydrous liquid nonionic surface-active agent produced by the reaction of nonylphenol with 7 moles of ethylene oxide. Non-ionics are stable, non-corrosive products in an anhydrous state. They are used in agricultural chemicals, dry cleaning, emulsifier, leather processing, metal processing, petroleum products, and paper processing.

T-Det® XD is a polyalkalene glycol monobutyl ether surface active agent primarily used as an emulsifier and dispersing agent. It is useful in a variety of industrial applications, such as pigment, paper coating, and polymer dispersant. Additionally, it is a good emulsifying agent for aromatic compounds and similar solvents, making it suitable for agricultural, insecticide, and pesticide formulations, as well as latex resin polymerization and metalworking fluids.

T-Mulz® 734-2 is a blended anionic surfactant designed primarily for making emulsifier systems for agricultural and industrial formulations. This product is an excellent emulsifier for a wide range of solvents. It is particularly good as a solvent emulsifier when hard water is the main problem.

Harcros Chemicals Antifoam 8820 Food Grade is a 20% active emulsion of polydimethylsiloxane formulated to control foam in both food and industrial processing. This defoamer is readily diluted with water or process liquids for easy addition to foam-generating solutions. It efficiently controls foam in nonionic, cationic, and anionic systems over a wide pH range.

T-Det® A 138-9 is an anhydrous liquid surface-active agent produced by the reaction of tridecyl alcohol with 8 moles of ethylene oxide at 90% active. It has a nonionic structure, making it compatible with anionic surfactants and stable in the presence of acids, bases, and salts.

T-Det® N 507 is a 70% active solution of T-Det® N 50, a nonionic surfactant produced by the reaction of nonyl phenol with 50 moles of ethylene oxide. It is compatible with anionic surfactants and is stable in the presence of acids, bases, and salts.

T-Det® N 1.5 is an anhydrous liquid nonionic surface active agent produced by the reaction of nonylphenol with 1.5 moles of ethylene oxide. It is a pale yellow liquid and can be used in chemical processing, emulsifiers, and foam control. It is also effective as a co-emulsifier in nonionic and nonionic-anionic surfactant blends.

T-Det® A 1312 is a non-ionic surfactant that is produced through the reaction of iso-tridecyl alcohol with 12 moles of ethylene oxide. This product can be used in a variety of applications, including textiles, metal degreasing, and household cleaners, due to its ability to penetrate, wet, solubilize, disperse, and emulsify effectively.

T-Det® N 8 is an anhydrous liquid nonionic surface-active agent produced by the reaction of nonylphenol with 8 moles of ethylene oxide. Non-ionics are stable, non-corrosive products in an anhydrous state. They are used in agricultural chemicals, dry cleaning, emulsifier, leather processing, metal processing, petroleum products, and paper processing.

T-Det® N 20 is an anhydrous liquid nonionic surface-active agent produced by the reaction of nonylphenol with 20 moles of ethylene oxide. Its nonionic structure makes it compatible with anionic surfactants and it is stable in the presence of acids, bases, and salts.

T-Det® N 9.5 is an anhydrous liquid nonionic surface-active agent produced by the reaction of nonylphenol with 9.5 moles of ethylene oxide. Non-ionics are stable, non-corrosive products in an anhydrous state and are used in agricultural chemicals, dry cleaning, emulsifier, leather processing, metal processing, petroleum products, and paper processing.

T-Det® N 307 is a 70% active solution of T-Det® N 30, a nonionic surfactant produced by the reaction of nonyl phenol with 30 moles of ethylene oxide. Its nonionic structure makes it compatible with anionic surfactants and it is stable in the presence of acids, bases, and salts.

T-Det® N 407 is a 70% active solution of T-Det® N 40, a nonionic surfactant produced by the reaction of nonyl phenol with 40 moles of ethylene oxide. Its nonionic structure makes it compatible with anionic surfactants and it is stable in the presence of acids, bases, and salts.

Harcros Chemicals Antifoam 100 Industrial Grade is a 100% active silicone compound that provides an efficient and economical means of preventing costly and dangerous foaming conditions in aqueous and non-aqueous systems. It is primarily used in non-aqueous industrial applications where silica fillers can be tolerated.

T-Det® N 6 is an anhydrous liquid nonionic surface active agent produced by the reaction of nonylphenol with 6 moles of ethylene oxide. Non-ionics are stable, non-corrosive products in an anhydrous state and are used in a variety of industries, such as agricultural chemicals, dry cleaning, emulsifier, leather processing, metal processing, petroleum products, and paper processing.

Harcros Chemicals Antifoam 8830 Food Grade is a 30% active emulsion of polydimethylsiloxane formulated to control foam in both food and industrial processing. This defoamer is readily diluted with water or process liquids for easy addition to foam-generating solutions. It efficiently controls foam in nonionic, cationic, and anionic systems over a wide pH range.

Harcros Chemicals Antifoam 8810 Industrial Grade is a 10% active emulsion of polydimethylsiloxane formulated to control foam in industrial processing. This defoamer is readily diluted with water or process liquids for easy addition to foam-generating solutions. It efficiently controls foam in nonionic, cationic, and anionic systems over a wide pH range.

Harcros Chemicals Antifoam 30 Food Grade is a 30% antifoam emulsion of polydimethylsiloxane that is water-dilutable and designed primarily for use in food processing. It is also recommended for many industrial applications, such as textile dyeing and finishing, leather finishing, latex processing, soap and detergent manufacture, and boiler water defoaming. Concentrations of the emulsion required for effective defoaming range from 5 to 100 ppm.

Harcros Chemicals Antifoam AF 100 IND is a 100% active silicone compound that provides an efficient and economical means of preventing costly and dangerous foaming conditions in aqueous and non-aqueous systems. This product is primarily used in non-aqueous industrial applications where silica fillers can be tolerated.

T-Det® EPO 101 is a nonionic surface-active agent produced by the reaction of ethylene oxide and propylene oxide. It is used in the paper, petroleum, textile, detergent and agriculture industries, and is recommended as a dispersing agent, gelling additive, wetting additive and chemical intermediate.

T-Det® A 133 is an anhydrous liquid surface-active agent produced by the reaction of tridecyl alcohol with 3 moles of ethylene oxide. Its nonionic structure makes it compatible with anionic and cationic surfactants and it is stable in the presence of acids, bases, and salts.

T-Det® N 4 is an anhydrous liquid nonionic surface-active agent produced by the reaction of nonylphenol with 4 moles of ethylene oxide. It is used as a gasoline additive to prevent gas line freezing and carburetor. Non-ionics are stable, non-corrosive products in an anhydrous state.

T-Det® A 139 is an anhydrous liquid surface-active agent produced by the reaction of tridecyl alcohol with 9 moles of ethylene oxide. Its nonionic structure makes it compatible with anionic and cationic surfactants, and it is stable in the presence of acids, bases, and salts.

Harcros Chemicals Antifoam 8810 Food Grade is a 10% active emulsion of polydimethylsiloxane formulated to control foam in both food and industrial processing. This defoamer is readily diluted with water or process liquids for easy addition to foam-generating solutions. It efficiently controls foam in nonionic, cationic, and anionic systems over a wide pH range.

T-Det® A 1315 is a surface active agent used in various applications such as textile processing, metal degreasing, clay soils, fire fighting, industrial, institutional, and household cleaners. It is known for its ability to penetrate, wet, solubilize, disperse, and emulsify. This agent is produced by the reaction of iso-tridecyl alcohol with 15 moles of ethylene oxide.

Harcros Chemicals Antifoam 8830 Industrial Grade is a 30% active emulsion of polydimethylsiloxane formulated to control foam in industrial processing. This defoamer is readily diluted with water or process liquids for easy addition to foam-generating solutions. It efficiently controls foam in nonionic, cationic, and anionic systems over a wide pH range.

Venadol® 104 is a 100% active surface-active agent with a unique structure that allows multi-functional properties which include the following: foam control, reduction in surface tension, and viscosity stabilization. These various properties allow Venadol® 104 to be utilized in various application such as, inks, paint, coatings, adhesives, pigment manufacturing, pigment dispersion, dye processing, agricultural, cement, and metalworking lubricants. This product is APE Free.

Venadol® 104BC is a 50% active surface-active agent in 2-Butoxyethanol with a unique structure that allows multi-functional properties which include the following: foam control, reduction in surface tension, and viscosity stabilization. These various properties allow Venadol® 104BC to be utilized in various application such as, inks, paint, coatings, adhesives, pigment manufacturing, pigment dispersion, dye processing, This product is APE Free.

Venadol® 40 is a non-foaming wetting agent with a unique structure that allows multi-functional properties which include the following: foam control, increased wetting and reduction in surface tension. These various properties allow Venadol® 40 to be utilized in various application such as, inks, paint, coatings, adhesives, pigment manufacturing, pigment dispersion, dye processing, agricultural, cement, and metalworking lubricants. This product is APE Free.

Venadol® 20 is an effective weitting agent and molecular deofamer that can be utilized in various application such as, inks, paint, coatings, adhesives, pigment manufacturing, pigment dispersion, dye processing, agricultural, cement, and metalworking lubricants. This product is APE Free.