Products

Harcros Chemicals Antifoam HL 36 is recommended as an effective antifoam in highly alkaline solutions where degradation of conventional antifoams is of concern. Tests have shown that using 1% by weight or less of this product can control foam in caustic solutions.

Harcros Chemicals Antifoam 8820 Food Grade is a 20% active emulsion of polydimethylsiloxane formulated to control foam in both food and industrial processing. This defoamer is readily diluted with water or process liquids for easy addition to foam-generating solutions. It efficiently controls foam in nonionic, cationic, and anionic systems over a wide pH range.

Harcros Chemicals Foamer CD is a high-foaming anionic surfactant developed for use in air mist drilling. It is also suitable as a base for high-foaming liquid detergents, scrub soaps, rug shampoos, and all-purpose cleaners. It is a sulfate-ether surfactant based on a linear hydrophobe that has been proven in the industry to be highly biodegradable. This product is soluble and stable in solutions with high electrolyte concentrations.

Harcros Chemicals Antifoam 8830 Industrial Grade is a 30% active emulsion of polydimethylsiloxane formulated to control foam in industrial processing. This defoamer is readily diluted with water or process liquids for easy addition to foam-generating solutions. It efficiently controls foam in nonionic, cationic, and anionic systems over a wide pH range.

Harcros Chemicals Antifoam 30 Food Grade is a 30% antifoam emulsion of polydimethylsiloxane that is water-dilutable and designed primarily for use in food processing. It is also recommended for many industrial applications, such as textile dyeing and finishing, leather finishing, latex processing, soap and detergent manufacture, and boiler water defoaming. Concentrations of the emulsion required for effective defoaming range from 5 to 100 ppm.

Harcros Chemicals Antifoam 8810 Industrial Grade is a 10% active emulsion of polydimethylsiloxane formulated to control foam in industrial processing. This defoamer is readily diluted with water or process liquids for easy addition to foam-generating solutions. It efficiently controls foam in nonionic, cationic, and anionic systems over a wide pH range.

Harcros Chemicals Antifoam 100 Industrial Grade is a 100% active silicone compound that provides an efficient and economical means of preventing costly and dangerous foaming conditions in aqueous and non-aqueous systems. It is primarily used in non-aqueous industrial applications where silica fillers can be tolerated.

Harcros Chemicals Antifoam 30 Industrial Grade is a 30% antifoam emulsion of polydimethylsiloxane. It is water-dilutable and designed primarily for use in industrial products and processes. This product is not intended for use in food or drug processing. Concentrations of the emulsion required for effective defoaming range from 5 to 100 ppm.

Harcros Chemicals Antifoam 8810 Food Grade is a 10% active emulsion of polydimethylsiloxane formulated to control foam in both food and industrial processing. This defoamer is readily diluted with water or process liquids for easy addition to foam-generating solutions. It efficiently controls foam in nonionic, cationic, and anionic systems over a wide pH range.

Harcros Chemicals Antifoam 100 Food Grade is a 100% active silicone compound that provides an efficient and economical means of preventing costly and dangerous foaming conditions in aqueous and non-aqueous systems. It can be used in the manufacture of food packaging materials and as a direct food additive. This product exhibits excellent dilution stability when diluted with aliphatic, aromatic, and chlorinated solvents.

Harcros Chemicals Antifoam 8830 Food Grade is a 30% active emulsion of polydimethylsiloxane formulated to control foam in both food and industrial processing. This defoamer is readily diluted with water or process liquids for easy addition to foam-generating solutions. It efficiently controls foam in nonionic, cationic, and anionic systems over a wide pH range.

Harcros Chemicals Antifoam 10 Food Grade is a 10% antifoam emulsion of polydimethylsiloxane designed for defoaming aqueous systems. It is exceptionally easy to dilute and disperse. This product maintains its effectiveness at temperatures up to boiling. Although designed primarily for food applications, it can also be used in many industrial processes. For effective defoaming, concentrations ranging from 10 to 100 ppm are required.

Harcros Chemicals Foamer LLF is a non-aqueous ammonium ether sulfate concentrate. It is a viscous liquid that thins readily with warming. This product is typically diluted with water and a co-solvent to make aqueous cutbacks and finished formulations. This anionic surfactant is based on a short-chain alcohol ethoxylate and is able to produce copious amounts of foam in both fresh water and brine. It is stable in both neutral and alkaline aqueous media and is suitable for use as a hard surface cleaner and wetting agent.

T-Det® 1618 DI 302 is a low-foaming, 100% active fatty alcohol alkoxylate that is used in rinse aid, bottle wash, mechanical dishwash formulations, and pulp and paper processing. It functions as a leveling aid in paper coating and is extremely hydrophobic. This product has a low foaming profile across a wide temperature range and can also be used as a defoamer, though a dispersing agent may be required.

H-Sil® EM-60 HG is a proprietary blend of silicone fluids and reactive organo-silicones emulsified into a high-solids emulsion. It is designed to provide premium performance as a tire and vinyl dressing. This product is easily diluted with water to form a stable dispersion for use levels ranging from 10 to 20% actives. A 20% active product gives excellent all-round performance by delivering a high-gloss, durable (several washings) coating to tires and vinyl.

H-Soft® AO-10 is a highly effective 30% active decyl dimethylamine oxide that is widely used for its excellent wetting, detergency, foam boosting, and grease-cutting properties. This product is known for its acid, base, and hypochlorite stability and is compatible with a wide range of surfactants, including anionic, cationic, and nonionic varieties. With its exceptional quality, H-Soft® AO-10 is suitable for use in a wide variety of markets and applications.

T-Det® N 1.5 is an anhydrous liquid nonionic surface active agent produced by the reaction of nonylphenol with 1.5 moles of ethylene oxide. It is a pale yellow liquid and can be used in chemical processing, emulsifiers, and foam control. It is also effective as a co-emulsifier in nonionic and nonionic-anionic surfactant blends.

H-Sil® SDF 12,500 cSt is a linear polymer that is often referred to as "high-viscosity polydimethylsiloxane" or "silicone fluid." Its applications include cosmetic ingredients, lubricants for plastics, insulating fluids, household product ingredients, mold-release agents, surface active agents, and many others.

H Soft® AO-14 formula is a 29% active myristyl dimethylamine oxide in water that is known to build viscosity and increase foaming capabilities. Acid, base, and hypochlorite-stable, AO-14 is compatible with anionic, cationic, and nonionic surfactants. Its exceptional quality allows it to be applied in a wide range of applications and markets, such as in quality dishwashing detergents as a viscosity builder, grease remover, and rinsing agent.

H-Sil® D4 is a volatile cyclic dimethyl silicone fluid that is clear and odorless. This low-toxicity solvent evaporates completely at room temperature and leaves no residue. It is widely used in cosmetics to provide spreading, easy rub-out, and a slick, non-greasy feel to the skin. It is a good cleaning solvent for industrial applications with degreasing properties for dry cleaning and spot treatment applications.

H-Sil® EM-FS-50 is a fluorosilicone-in-water emulsion that uses nonionic emulsifiers. This unique emulsion is specially formulated for hard surface polishes. The fluoro portion of the molecule adds protection from greasy and waterborne soils, and the silicone portion provides gloss and additional protection from outdoor elements. It is an excellent product for formulating spray-on and wipe-off transportation polishes and protectants.

T-Det® 25R2 is a 100% active, high-molecular-weight, di-functional block co-polymer. This product is considered a low-foaming surfactant. It works well as a rinse aid and serves as a lubricant and leveling aid for paper coating. This product is a low-foaming reverse block copolymer.

H Soft® AO-1416 is a 30% active myristyl/cetyl (C14/16) dimethylamine oxide in water that can build viscosity and increase foaming capabilities. It is stable in acid, base, and hypochlorite, and is compatible with anionic, cationic, and nonionic surfactants. Its exceptional quality makes it suitable for a wide range of applications and markets.

Poly Suga®Mulse D9 MB is a PEG-free, nonionic fragrance solubilizer derived from 100% biobased raw materials. It efficiently solubilizes fragrances and oils in water-based systems, compatible with various surfactants and stable in high electrolyte conditions. Certified by the Safer Choice Program and derived from sustainable palm oil, it meets stringent environmental standards and is suitable for use in a wide range of formulations.

H-Sil® SDF 30,000 cSt is a linear polymer that is often referred to as "high-viscosity polydimethylsiloxane" or "silicone fluid." Its applications include cosmetic ingredients, lubricants for plastics, insulating fluids, household product ingredients, mold-release agents, surface active agents, and many others.

H-Sil® EM-HTS Concentrate is a nonionic emulsion of hydroxy functional silicone fluid designed to provide superior performance in a variety of applications, including:

• Tire and vinyl dressings
• Polishes and waxes for hard surfaces
• As a performance booster to standard silicone emulsions
• As a durable release agent

H-Sil® EM-60 Concentrate is a 60% active nonionic emulsion of regular viscosity silicone. This product can be used as-is or diluted with water to form a stable emulsion letdown. It is formulated to provide excellent gloss, lubrication, and protection to a variety of surfaces. This product is an excellent ingredient for formulators to use in automotive tire and vinyl dressings, including polishes and waxes for automobiles and other hard surfaces.

H-Sil® SDF 200 cSt is a regular viscosity linear polymer that is often referred to as "polydimethylsiloxane" or "silicone fluid." Its applications include cosmetic ingredients, lubricants for plastics, insulating fluids, household product ingredients, mold-release agents, surface active agents, and many others.

T-Soft® L60 is an anionic detergent that exhibits excellent emulsification, wetting, and foaming properties. It is used in a wide variety of industrial markets; oil and gas, HI and I, construction, and textiles.

T-Det® PEG 400 Mono Oleate is a polyethylene glycol-based compound that is used as an emulsifier and co-emulsifier for oil-in-water (O/W) emulsions. This polyether compound has a high molecular weight. It can also be used to increase viscosity in detergent formulations.

T-Det® MPEG 3000 is a versatile substance that finds its application in a wide range of industries, including pharmacology, cosmetics, detergent, and household goods production. It is used as a soap bar glue, a soluble agent in detergent pastes, a fixing agent for odors in soaps and detergents, as well as an additive in general cleaners, polishers, air fresheners, and automatic dishwashing detergents.

T-Mulz® D6PE is a phosphate ester designed for use in alkaline formulations and hard surface cleaners. It may also be used in concentrated electrolyte solutions to improve salt tolerance. This product functions as a hydrotrope and is capable of coupling silicates, phosphates, and carbonates into alkaline mixtures. The added benefits of this product are that it provides detergency and improved wetting power to the formulation.

T-Mulz® T9PE is a phosphate ester designed for use in alkaline formulations and hard surface cleaners. It may also be used in concentrated electrolyte solutions to improve salt tolerance. This product also functions as a hydrotrope and is capable of coupling silicates, phosphates, and carbonates into alkaline mixtures. The added benefits of this product are that it provides detergency and improved wetting power to the formulation. It finds application in agricultural tank mix additives as fertilizer-water conditioner formulations.

H Soft® AO-12 is a 30% active lauryl dimethylamine oxide that exhibits excellent wetting and detergency properties, as well as outstanding foam boosting and grease cutting qualities. It is acid and hypochlorite stable, and compatible with anionic, cationic, and nonionic surfactants. The exceptional quality of H Soft® AO-12 makes it suitable for use in a variety of markets and applications.

T-Mulz® 734-2 KS is the potassium salt of an organic phosphate ester that is designed for use in alkaline cleaners and concentrated electrolyte solutions. It improves salt tolerance and functions as a hydrotrope. This product serves as a coupling agent in conjunction with other surfactants to clarify formulations that might otherwise be inhomogeneous. It also has the ability to improve a formula€™s wetting ability and detergency.

T-Mulz® 844 M is a phosphate ester designed for use in alkaline cleaners, yarn lubricants, and wet processing. It demonstrates excellent salt tolerance, especially under alkaline conditions. This product also functions well as a hydrotrope and can couple solvent, electrolyte, and surfactant mixtures. Additional benefits of using T-Mulz® 844 M include improved wetting and detergency. This product also finds application as a primary emulsion polymerization surfactant and is well suited to acrylic latexes.