Products

Imidazolidinyl Urea is a cosmetic preservative.

Tetrasodium EDTA 39% is used in the following applications: cleaning, b, Chelating agent, detergents & soaps, disinfectants, metal remover, metal treatment, oil industry, personal care, polymer processing, potentiator, pulp & paper industry, scale dissolver, Stabilizer, textile industry. Hardness control is a function.

Independent Chemical Corporation Xanthan Gum is an excellent thickener and stabilizer that can be used in a variety of food, cosmetic, and pharmaceutical applications. Salad, mayonnaise, cold drinks, and so on.

ABIOL FORTE G1051 is a product. To avoid heat degradation during the preparation of products requiring hot processing, it is recommended to add ABIOL FORTE during the cool-down phase at a temperature below 60°C.

Tetrasodium EDTA 4 has the following applications: cleaning, Chelating agent, detergents & soaps, disinfectants, metal remover, metal treatment, oil industry, personal care, polymer processing, potentiator, pulp & paper industry, scale dissolver, Stabilizer, textile industry. Hardness control is a function. Available in 40 percent liquid and dry Tetrahydrate forms.

I-PRESERVE PHENO is an active ingredient in cosmetic and personal care applications, as well as a preservative in a variety of personal care formulations such as leave-on and rinse-off formulations. I, Various industrial applications.

Caprylic acid is antibacterial, antiviral, and antifungal.

SYNTHALEN E80 is a synthetic polymer that is well-known and widely used as a thickener and suspending agent in the cosmetic and pharmaceutical industries due to its safety and versatility.

SYNTHALEN CR is a synthetic cationic polymer that can be used as a thickening, suspending, and conditioning agent in cosmetic applications. Synthalen CR is well-tolerated by a wide range of cationic and nonionic surfactants. A cationic thickener.

CONDITIONER P-IO G1096 is Polyquaternium 10 and is an excellent hair conditioner.

DOWICIL 200 is primarily used as a preservative in a wide range of personal-care and cosmetic products. It is intended to provide broad-spectrum antimicrobial activity that is highly effective, particularly in water-based formulations. It is used in both leave-on and rinse-off products such as baby care, hair care, lotions, powders, and creams. This item has been discontinued; please contact us for replacements.

SYNTHALEN® M is a synthetic polymer that is well-known and widely used in the cosmetic and pharmaceutical industries as a thickener and suspending agent due to its safety and versatility. It is virtually solvent-free because it is produced using a proprietary manufacturing technique (50 ppm max of methylene chloride). SYNTHALEN® M dispersions have low viscosity at 0.2 percent or less and high viscosity at higher concentrations (0.5 percent or more) These characteristics enable the production of multiple products from a single polymer. As a result, it is ideal for stabilizing emulsions and suspensions in cosmetic and pharmaceutical applications. Thickening agent.

SYNTHALEN® CH is a thickening agent. SYNTHALEN® CH is a benzene-free synthetic polymer that is well known and widely used in the cosmetic industry as a thickener and suspending agent due to its safety and versatility. SYNTHALEN® CH dispersions have a high viscosity and a high clarity (see Fig. 1 and 2). As a result, it is ideal for creating sparkling and clear gels as well as stabilizing emulsions. If the proper neutralizing agent is used, very clear gels can be obtained in the presence of high amounts of organic solvents (e.g., ethanol). The typical percentage of use ranges between 0.1 and 1.5 percent, depending on the type of formulation and final desired viscosity. SYNTHALEN® CH is a 3V Sigma product.

Synthalen® L is a synthetic polymer that is well-known and widely used as a thickener and suspending agent in the cosmetic and pharmaceutical industries due to its safety and versatility. It is virtually solvent free because it is produced using a proprietary manufacturing technique (50 ppm max methylene chloride). Synthalen® L dispersions have a low viscosity but a higher suspending ability than other carbomers. As a result, Synthalen® L is the polymer of choice for fluid emulsion and suspension stabilisation. Agent of thickening.

CONDITIONER P7 G1336 is Polyquaternium 7, an excellent cationic skin conditioner that is a 1% solution in anionic systems.

RAPIDGEL EZ1 ( A novel fast dispersing polymer with multiple rheological benefits) PROPERTIES • Pre-neutralized cross-linked acrylic polymer in preferred vehicle for improved rheological and sensorial properties. Shear-thinning liquid that is simple to use.

Polygel CA is a substance synthesis laboratory chemical. A carbomer 940 product that is used to thicken hydro-alcoholic cosmetic products such as hand sanitizers, creams, lotions, and so on. The typical concentration is 0.5 wt percent. The product is first hydrated in the water phase with high shear for 45-60 minutes, then the alcohol is added and the pH is adjusted to 6.0-6.5 to thicken and increase clarity. When done correctly, this will result in a clear, transparent product. 3V Sigma manufactures Polygel CA.

Kaoolin Clay USP is a functional additive. Cosmetics & Personal Care, Pharmaceutical, Nutritional, & Healthcare are the product markets for this product.

Independent Chemical Corporation Skyline F (03.5205) is designed to disperse pigments, insoluble powders, titanium dioxide, zinc oxide, sunscreen powders, lacquers, texturizers agents, iron oxides, and other materials. A ground-breaking new method for dispersing fine particle-sized pigments into a stable solution without the use of a mill or Castor Oil. With twice the loading of a Castor Oil system, this product produces an extremely stable, odorless liquid dispersion.

Sodium gluconate is used as a chelating agent in foods, cleaning solutions, electroplating, concrete admixtures, food additive, cosmetic additive, medical aids, and industrial applications.

Calamide® MC is a white to off-white flake containing 1:1 coconut monoethanolamide. It has a low free amine content and is an excellent substitute for diethanolamides. Calamide® MC increases viscosity in a variety of detergent systems while also acting as a foam stabilizer. This product is made from a renewable vegetable resource. A product with a low free amine content that is an excellent substitute for diethanolamides. Shampoos, body washes, bubble baths, liquid soaps, and hair conditioners all contain it. High pH stability, foam stability, and foam boosting properties are all exceptional. It has excellent viscosity-building properties. It has the advantage of being completely water soluble and having a low free amine content.

I-Preserve CG is a Laboratory Chemicals preservative used in a variety of personal care formulations, including leave-on and rinse-off formulas. I, Use as a food additive and natural preservative, as well as in a variety of industrial applications. Food starch bleaching agent Antimicrobial washes for poultry and fish contain peracetic acid. It is a relatively efficient and selective bleaching agent, effective against a wide range of microorganisms, and is not deactivated by catalase or peroxidase.

Synthalen® K is a synthetic polymer that is well-known and widely used in the cosmetic and pharmaceutical industries as a thickener and suspending agent due to its safety and versatility. It is virtually solvent-free because it is produced using a proprietary manufacturing technique (50 ppm max of methylene chloride). Synthalen® K dispersions are distinguished by their high viscosity and clarity. It is ideal for creating sparkling and clear gels as well as stabilising emulsions for cosmetic and pharmaceutical applications. Synthalen K is a 3V Sigma product.