Products

URE-SEAL H2O™ – Gloss has excellent abrasion and chemical resistance with a gloss, mid gloss, or natural finish (Keep in mind that the ‘Gloss’ blend will appear as semi-gloss when applied on brick pavers). The mild odor makes it ideal for interior applications. Ure-Seal H2O will not yellow and will form a very hard protective coating for high traffic areas, counter tops, restaurants, decorative concrete & brick pavers. Ure-Seal H2O can be used over epoxy flooring, garage floors, anywhere that high durability and superior chemical resistance is required

Fast Set liquid accelerator is used to speed up the set time of Portland cement mixes. Fast Set provides and early hydration od Portland cement and aids in the attain-ment of the required strength and durability of cured concrete. Fast Set can also be used as a waterproofing plug or slush when substituted for the water normally used in Portland cement and sand mix. It can be used under adverse conditions even under water.

Crystal Clear Epoxy Seal is a 100% solids, two component epoxy binder. Crystal Clear Epoxy Seal can be applied over most ICT products.

WET!™ Color Enhancer & Sealer has excellent resistance to abrasion and chemicals, including salt. The penetrating nano particles of ICT WET! (157) Allows the product to soak into the surfaces of porous substrates, such as brick pavers, to stabilize joints and loose sand within, while also enhancing the color of the surface being sealed. ICT WET! (157) Is non-yellowing, once cured, and will form a very hard protective coating for brick pavers, porous concrete & masonry surfaces. The durability and resistance to chemicals and salt of ICT WET! (157) makes it great for application on sidewalks, pool decks, and driveways. Exterior use only.

ICT Texture-EEZ 3500 is a water-based Acrylic, non-cementitious, quartz, slip resistant texture coating designed for concrete and masonry surfaces. Texture-EEZ 3500 is a hard durable high strength finish available in 1- & 5-gallon pails and is factory blended to insure color consistency. H2COOL Technology is a groundbreaking pigmentation process that reflects IR rays resulting in a lower surface temperature as well as less deterioration that would cause color loss, fading, and other issues caused by absorption of IR rays.

URE-SEAL H2O™ – Mid-Gloss has excellent abrasion and chemical resistance with a gloss, mid gloss, or natural finish (Keep in mind that the ‘Gloss’ blend will appear as semi-gloss when applied on brick pavers). The mild odor makes it ideal for interior applications. Ure-Seal H2O will not yellow and will form a very hard protective coating for high traffic areas, counter tops, restaurants, decorative concrete & brick pavers. Ure-Seal H2O can be used over epoxy flooring, garage floors, anywhere that high durability and superior chemical resistance is required

Sure Grip H2O is a self cross-linking epoxy formulation to aide in bonding a coating to a substrate. Sure Grip H2O is ideal for use on dense, bare, smooth, broom-finished, and painted concrete.

URE-SEAL H2O™ – Natural has excellent abrasion and chemical resistance with a gloss, mid gloss, or natural finish (Keep in mind that the ‘Gloss’ blend will appear as semi-gloss when applied on brick pavers). The mild odor makes it ideal for interior applications. Ure-Seal H2O will not yellow and will form a very hard protective coating for high traffic areas, counter tops, restaurants, decorative concrete & brick pavers. Ure-Seal H2O can be used over epoxy flooring, garage floors, anywhere that high durability and superior chemical resistance is required

7:1 Ure-Seal H2O™ has excellent abrasion and chemical resistance with a gloss / semi-gloss finish. The mild odor makes it ideal for interior applications. 7:1 Ure-Seal H2O will not yellow and will form a very hard protective coating for brick pavers and for the use on commercial & residential applications. 7:1 Ure-Seal H2O can be applied anywhere that high durability and superior chemical resistance is required.