Products

K-FLEX® A307 is a low viscosity, 100% solids linear, saturated, aliphatic polyester diol. This product is designed as a flexibility modifier for acrylic/isocyanate and acrylic/melamine systems.

K-FLEX® A308 is a low-viscosity polyester diol designed as a flexibility modifier for acrylic/isocyanate and acrylic/melamine systems. K-FLEX® A308 provides good hardness and adhesion while allowing lower VOC levels.

DISPARLON® UVX-188 is an excellent defoaming additive based on special vinyl polymers. Specially designed for defoaming of epoxy UV coatings imparting excellent air-release at any stage from coating manufacturing to film forming.

DISPARLON® OX-70 is a silicone-free, acrylic surface control additive that provided strong defoaming and leveling properties Particularly effective in high-viscosity paints which require a strong defoaming agent, such as epoxies, floor coatings and multi-component systems.

DISPARLON® 6650 is a powder polyamide which, through heat activation, develops a strong thixotropic network, providing excellent anti-sag properties and improved recoatability to coatings while being cost effective.

K-SPERSE® 152 is a highly effective wetting and dispersing agent for all types of pigments. It is a zinc salt of an alkyl aryl sulfonic acid dissolved in an oxygenated solvent and is recommended for use in all solventborne coatings and inks.

DISPARLON® 6250 is a cost effective powdered thixotropic agent based on amide wax. Low activation temperature required to build a strong thixotropic network which prevents slumping of sealants and adhesives. Especially suited for MS sealant and silicone systems.

K-FLEX® XM-332 is an ultra low-viscosity polyester polyol modifier resin designed to provide improved flexibility in solvent-based, high solids and solventless systems. Compared to other K-FLEX® polyester diols, XM-332 produces the softest films. K-FLEX® XM-332 is recommended for use in air dry/force dry 2-component polyurethanes and blocked isocyanate systems.

DISPARLON® UVX-189 is an excellent defoaming additive based on special vinyl polymers. It is specially designed for defoaming of epoxy and acrylic UV coatings imparting excellent air-release at any stage from coating manufacturing to film forming.

DISPARLON® L-1984N is a silicone-free, acrylic polymer surface control agent for leveling properties in medium polarity systems. Recommended for acrylic coatings including high solids melamine and 2K urethanes. L-1984N has lower surface tension than L-1980N and can be used where greater wetting is required.

DISPARLON® NSH-8430HF is a surface control additive based on specially prepared acrylic/silicone copolymers designed for baking paints such as acrylic/melamine, alkyd/melamine, polyester/melamine and acid/epoxy paint for automotive and appliance applications. This product strongly prevents cratering caused by dirt/stain contamination, and gives excellent wetting over low surface tension coatings such as some of the new high-polarity automotive OEM coatings.

DISPARLON® 4200-20 is an oxidized polyolefin based thixotropic agent designed to prevent pigment settling and hard caking, with little effect on viscosity. It works synergistically with other rheological additives.

DISPARLON® DA-325 is a solvent-free wetting and dispersing agent based on an amine salt of polyether phosphate, designed for dispersing pigments in Solvent-free coating systems. Effective with filler, organic, and inorganic pigments.

K-KAT® 4205 is a zirconium chelate catalyst that provides extended pot life and selectivity to NCO/OH reactions for reduced gassing in 2K PU systems. It is efficient for ambient and low temperature cure coatings.

K-KAT® 682LV is a unique bismuth-amine complex with an excellent balance of high efficiency and hydrolytic stability due to metal-amine synergy. It exhibits great compatibility with HFO-blown PU foam and is efficient in low temperature cure PU systems.

DISPARLON® 4200-10 is a flowable paste of polyolefin wax in xylene consisting of fine particles of 5 μ or less. This thixotropic agent can be post added to prevent pigment settling and hard-caking during storage or during coating application with little effect on viscosity.

DISPARLON® 6300 is a hybrid powdered thixotropic agent based on amide wax. Low activation temperature is required to build a strong thixotropic network which provides excellent anti-sag properties along with good recoatability and minimal viscosity increase. It is especially effective in epoxy coatings and adhesives.

DISPARLON® LHP-96 is a silicone modified surface control agents based on specially prepared acrylic and vinyl polymers. These products have unique properties that allow them to eliminate cratering caused by various kinds of surface contaminants and spray mists, and promote leveling of the coating.

DISPARLON® 6500 is a unique non-reactive polyamide thixotrope supplied as a powder. Through heat activation a strong thixotropic network provides strong anti-sagging and Anti-slumping without seeding or loss of effectiveness on aging. It is effective in caotings, sealants and adhesives formulations.

DISPARLON® L-1980N is silicone-free acrylic polymer surface control agent for high polarity solventborne systems. Recommended for use in polyester/melamine and urethane coatings and in unsaturated polyester applications for leveling and defoaming properties.

K-SPERSE® 131 is a highly effective wetting and dispersing agent for all types of pigments. It is a calcium salt of an alkyl aryl sulfonic acid dissolved in an aliphatic solvent and is recommended for use in solventborne coatings and inks.

DISPARLON® OX-60 is a surface control additive based on an acrylic polymer. Works both as a defoamner and anti-pop additive in a variety of solvent-based industrial coatings particularly with ambient cure or bake systems. These properties make it possible to obtain a thicker film in one application improving coating operations.

DISPARLON® PFA-231 is a thixotropic agent in paste form consisting of a specially prepared amide wax activated in aromatic free solvent. Develops an exceptionally strong thixotropic structure for anti-settling and anti-sag properties in a wide variety of applications and resin systems.

K-STAY® 511 is a liquid thixotrope for pigmented solventborne applications. It is a pourable liquid which makes for ease of use in production.

K-KAT® 6212 is a selective, non-persistent catalyst for solventborne and waterborne 2K PU coatings. It is recommended that the catalyst is stored in the isocyanate component or added as 3rd component. Recommended applications for K-KAT® 6212 include PU coatings, adhesives, RIM and resin synthesis.

K-POL® 8211 is a unique, aliphatic diol recommended for 2K PU general purpose coatings and elastomers. It provides chemical and stain resistant, scratch resistances and hard films with good flexibility.

K-KAT® 348 is a versatile, efficient bismuth carboxylate catalyst that can be used as an alternative to DBTDL in 2K and 1K polyurethane systems. It provides similar properties to organotin catalysts without environmental drawbacks. It is also a non-persistent catalyst that is effective for resin synthesis.

DISPARLON® 6100 is a powdered thixotropic agent based on amide wax. Lowest activation temperature required to build a strong thixotropic network which prevents slumping of sealants and adhesives. Especially suited for MMA/MS polymer sealants.

K-POL® 9437 is a cost effective, low molecular weight urethane diol. It is recommended as a modifier for waterborne and water reducible amino crosslinked systems. K-POL® 9437 provides increased film hardness, improved acid etch and excellent corrosion resistance.

DISPARLON® 1970 is a silicone-free, high molecular weight surface control agent. The product acts as a leveling agent with a defoaming effect in high polarity solventborne systems such as polyester bake applications, high build urethanes and high solids.

DISPARLON® EZ-777 is an easily dispersible paste of specially activated synthetic amide wax. It is easily incorporated into many solventborne systems to develop an exceptionally strong and long retained thixotropic structure.

DISPARLON® LHP-91 is a silicone modified surface control agents based on specially prepared acrylic and vinyl polymers. These products have unique properties that allow them to eliminate cratering caused by various kinds of surface contaminants and spray mists, and promote leveling of the coating.

K-FLEX® XM-359 is designed to provide long pot life in 2K polyurethanes and to prevent yellowing resulting from interaction with benzotriazole (BZT) UV absorbers in clearcoat systems. K-FLEX® XM-359 is a saturated, aliphatic resin modifier.

K-KAT® XK-661 is a novel Zinc-amine complex catalyst with excellent hydrolytic stability, making it useful for waterborne 2K PU coatings as well as 1K moisture cure polyurethane adhesives. K-KAT® XK-661 is supplied 80% active in butyl acetate for easier incorporation into waterborne systems.

K-KAT® XK-618 is a mixed organometallic complex catalyst designed to be an alternative to mercury and tin in urethane cast elastomers. It has excellent compatibility with 1,4-BDO and is recommended for aliphatic systems.

DISPARLON® UVX-36 is an excellent leveling additive based on proprietary acrylic co-polymer technology. It is specially designed for acrylic UV coatings to improve leveling and anti-cratering, providing excellent sharpness and smoothness to the coatings. It does not lower the surface tension of coating film and impart very good recoatability avoiding any silicone-caused recoat problems.