Products

KM-017IB is an impact copolymer polypropylene for injection molding. It exhibits a high rigidity as well as excellent impact strength due to the ideal combination of highly crystalline homo matrix and the well designed rubber morphology.

KM-Polycarb 2031-50 resin is designed for extrusion and injection molding products. It exhibits an excellent physical property balance of heat resistance, transparency and impact strength.

KM840-K6M50 is a clarified polypropylene random copolymer.

KM-PP-253H is a high flow rate, nucleated and antistated homopolymer designed for injection molding applications. Typical applications include consumer products, housewares, medical components and thin-walled rigid packaging. Benefits include high flow rate, fast cycle times, good molding performance in thin-wall parts, low static charge and improved toughness. This material meets the requirements of the U.S. Food and Drug Administration as specified in 21 CFR 177.1520.

KM-U-143sMR is an octane copolymer MDPE Rotational Molding Resin that contains processing antioxidant and a UV stabilizer. This grade shows exceptional low temperature impact properties, low viscosity, and easy mold release.

KM-4112 is a Butene Copolymer LLDPE resin used in injection molding. Applications include thin wall lids, caps and closures, and compounding. This grade features excellent processability, cold temperature impact resistance, outstanding flexibility and warpage resistance, good organoleptic properties and high surface gloss. KM-4112 also contains a processing antioxidant.

KM-0051M is a polypropylene block copolymer for injection molding applications. It exhibits a good balance of stiffness and impact strength.

KM 0246 HIPS applications are deep draw thermoforming, extrusion processes, and sheets for Point of Purchase displays. It can be blended with GPPS for cups and plates and disposable packaging.

KMI-Nylux6 L3B is an impact-modified, easy flowing injection molding PA6 grade for fast processing.

PE 293-TR Polyethylene MEDIUM DENSITY POLYETHYLENE (MDPE) This high performance medium density polyethylene is an ethylene-hexene copolymer that is tailored for demanding pressure pipe applications that require: Good long-term hoop strength UV stabilizer for good outdoor storage life Outstanding resistance to slow crack growth

KM PC 3031UV-80 resin is designed for extrusion and injection molding products. It exhibits an excellent physical property balance of heat resistance, transparency and impact strength.

KM U-542sMR HDPE Octene Copolymer sHDPE Rotational Molding Resin It has good low temperature impact properties, high stiffness, and a broad processing window. It is very white and enhances part appearance. It is resistant to gas fading.

PC VLC-1000 is for lens of glasses, UV cut off <380 nm (3mm), High Viscosity, Correcting glasses.

KM-ZM0274 is a nucleated impact copolymer with a melt flow of 25 g/10 min.

KMI 1624-GA is a high-density polyethylene with outstanding ESCR, high impact resistance and good chemical resistance. It is delivered in pellet form and contains antioxidants and a UV-stabilizer. Typical customer applications include Intermediate Bulk Containers (IBC) for the packaging of dangerous goods and heating oil tanks.

PBAT KM801 is applied for blow film, blow molding, flexible hose and spinning products.

KM-0093XB is a high crystalline propylene impact copolymer designed for injection molding applications. It has excellent properties in stiffness, flow, mechanical properties, heat resistance and impact strength, which make this grade suitable for auto parts, electric appliances, large size containers, thin wall and very high speed injection applications. This is not a chemical cracked grade so it is free from surface gas mark. It can also reduce various injection problems such as surface trouble, shrink, warpage, etc. and reduce the cycle time of injection molding due to rapid crystallization

Nylux66-NAT is a general purpose PA66 grade well suited for injection molding and extrusion applications.

KM4291-HSBCS is a clear, linear triblock copolymer based on styrene and ethylene/butylene with a polystyrene content of 13%. It is supplied from North America in the physical form identified below. KM4291-HSBCS - supplied as a dusted pellet KM4291-HSBCS is used as a modifier of bitumen or thermoplastics and in compound formulations. It may also find use as an ingredient in formulating adhesives, sealants and coatings.

KM093-JM is a high impact block copolymer which has high ethylene-propylene rubber content. This grade is designed to be processed in huge injections molding equipment by improvement in mold release and anti-static. This grade is used in general household goods, thin wall applications, and home appliances.