Brands

724 JET-SET™ FLOOR is a profoundly crosslinked thermosetting polymer concrete system that forms a dense hard impermeable surface upon curing that is resistant to a very wide range of aggressive chemicals.

polyFIBRO® is a scientifically formulated coating devised to tackle the issues of gelcoat finishes traditionally used on fiberglass. Our thermo-polymer coating is long lasting and does not chip, peel or crack like traditional gelcoat and paint finishes. polyFIBRO® is easier to apply than gel coating, gives the appearance of a higher end finish and requires minimal maintenance.

STAT-A-FLEX® Loop Sealants are designed for maximum protection of signal systems in both asphalt and concrete aggregate roadways. It has outstanding adhesion, flexural and tensile strength to ensure the longest possible life of the signal system.

SURFA-TEX is a textured, water based acrylic wall and ceiling coating for exterior or interior use. It is durable, hard and available in a wide range of textures and colors.

E20™is a chromium tungsten nitride based proprietary coating.

CPP™ is a two-component moisture insensitive, 100% solids, high strength and reinforced structural-grade epoxy. CPP is truly versatile and can be used as an adhesive, patching filler, and as a high-build, stand-alone protective liner. The material can be applied as thin as a skim-coat and up to 1/2" per pass (vertical/overhead). Blended with reinforcing agents and various fibers, the Epoxytec CPP when cured acts as a fiber-reinforced- polymer (FRP) with high strength mechanical properties. Contains no solvents (no VOCs). CPP bonds to concrete, steel, wood, brick, some plastics and most construction materials.

When Thomas Edison founded General Electric, he insisted the company have the highest capability in fundamental material research. For over sixty years, Glyptal generated the robust, protective coatings necessitated by G.E. The company would look to Glyptal to formulate and manufacture its specialty needs when no existing product satisfied the requirements. We always got the tough ones.

ACRYCOTE is an isocyanate free alternative to urethane. It is a two component, cross linked acrylic coating designed to incorporate all the desirable characteristics that have made urethane popular: gloss retention, excellent exterior durability, and good chemical and solvent resistance.

Protal 7300™ is a VOC free, 100% solids epoxy coating specially formulated to coat dry, damp or wet surfaces. It is a high build liquid coating that can be applied by applicator pad or brush.

pHreeCOAT™ is a new patent pending anti-encrustation coating in the LubriLAST™ family. It prevents mineral deposition on indwelling medical devices.

E18™ is a titanium nitride based proprietary coating.

ProCure product line includes aqueous, UV, EB and specialty coatings as well as overprint varnishes all manufactured in our state-of-art Homewood, Illinois and Edwardsville, Kansas facilities.

Aqua-Shield Temp-Alert® 350 is the one and only clear coating for aluminum medical & industrial cylinders that changes from glossy clear coatings to dark green and then black color when exposed to temperatures in excess of 350°F.

VF 280 is a fast set, rapid curing, pure elastomeric polyurea protective coating for industrial applications requiring a flexible coating or lining for waterproofing or secondary containment. This protective membrane can be applied to geotextile fabric, concrete and steel substrates. VF 280 is a volatile free, odorless system proportioned at a 1:1 mix ratio with plural component spray equipment. VF 280 may be applied at varying thicknesses in a single application using a multi-pass spray technique.

Protal 7125™ is specifically formulated to be applied to colder substrates at colder ambient temperatures. It is a high build liquid coating that is brush or spray applied in one coat to many areas of in-service pipelines or during pipeline construction in the field. It cures fast to allow quick handling and backfilling, even down to -4°F (-20°C). Protal 7125™ is intended for use where a quick cure is required at lower substrate and/or ambient conditions such as during winter applications or on colder operating temperature pipelines.

Thurmalox® is industrial high-temperature protective coatings.

Xylan® coatings are a family of fluoropolymer and fluoropolymer hybrid coatings. Xylan® coatings provide dry lubrication, controlled friction, wear resistance, heat resistance, non-stick and release properties and, at the same time, can also give corrosion and chemical resistance.

GymShoe® is an exceptionally durable sport floor finish that keeps floors looking better longer. GymShoe is perfect for large sport complexes, higher education, dance floors, retail and commercial space or any high traffic sports facilities. With superior two-component performance you can be confident that GymShoe will hold up to even the busiest of gyms.

PPS OneCoat™ is a high performance single-component coating that can be used on most painted metal surfaces. Its high weather resistance and E2C (Easy 2 Clean) properties result in the reduction of maintenance costs.

Protal 7900HT™ is a VOC free, 100% solids epoxy coating for pipelines operating at higher temperatures. It is a high build liquid coating that can be hand or spray applied in one coat in the field or shop. It cures fast to allow quick backfill when applied to hot pipe.

DK 500™ 100% Solids Epoxy Clear Coat is a 2 component 100% solids, zero VOC floor coating system that is used in a wide variety of applications such as, thick-build clear coat for a host of decorative concrete systems, Dura-Kote Flake, Dura-Kote Metallic systems, and in certain applications as a primer coat and/or binder coat.

VersaFlex VF-380 is a 100% solids, fast setting, plural component, ultra-low shrink, polyurea elastomer and high performance coating. VF-380 is primarily designed for foam, geotextile and other non-reinforced substrates due to its specially designed low shrink formulation, but has excellent bond to steel, concrete, masonry and other properly prepared substrates. VF-380 is an excellent coatings solution for industrial applications requiring a resilient liner for waterproofing or secondary containment.