Products results

POWERSIL® N 553 DarkGrey is a one-component silicone dispersion that cures to form a tough, high-voltage insulator coating with excellent electrical properties. It offers very good resistance to weathering and outstanding tracking resistance. Additionally, POWERSIL® N 553 DarkGrey creates a long-term hydrophobic surface, preventing the formation of wet conductive films and reducing the risk of pollution flashovers.

ELASTOSIL® LR 6200 A/B is a liquid silicone rubber (LSR) that is solvent-free and free-flowing. It utilizes additive curing and consists of two components. This grade is specifically designed for textile coatings. ELASTOSIL® LR 6200 A/B has a very low viscosity, allowing for good penetration into the substrate and a dry surface touch. It is particularly well suited for textile coating applications that require enhanced flame retardancy.

POWERSIL® N 552 White is a one-component silicone dispersion that cures to form a tough high-voltage insulator coating with excellent electrical properties. It offers very good resistance to weathering and outstanding tracking resistance, ensuring its performance in various environmental conditions. Additionally, POWERSIL® N 552 White forms a long-term hydrophobic surface, effectively preventing the formation of wet conductive films and minimizing the risk of pollution flashovers.

WACKER® Silicone Paste P 12 is a pure white, soft-consistency heat sink paste with marked thermal conductivity. It is electrically insulating. WACKER® PASTE P 12 is used especially in semiconductor technology as a heat sink paste. When there is a need for good heat transfer from a semiconductor to a cooling element, applying a thin coating of WACKER® PASTE P 12 is advisable. In the assembly of semiconductors such as diodes, transistors, and thyristors, microscopic irregularities may exist on the mating surfaces of the semiconductor and the cooling surface. These surface irregularities can hinder firm metal-to-metal contact when assembled.

ELASTOSIL® LR 6294 A/B is a two-component, solventless liquid silicone rubber (LSR) system that cures rapidly upon heating to a tough silicone rubber. This product provides good adhesion and has been formulated primarily as a high-strength, moderate-viscosity liquid rubber for fabric coating applications.

SEMICOSIL® 988 TIC is a non-slump, thermally curable, one-part silicone rubber with excellent insulation properties. This product is optimized for insulation coating applications in disk power semiconductors. It is a ready-to-use system that exhibits thixotropic behavior, ensuring easy application and positioning. SEMICOSIL® 988 TIC is transparent, has a medium hardness, and offers high flexibility as a low-stress adhesive.

SEMICOSIL® 942 UV A/B is a sprayable, addition-curing, two-part silicone rubber with low viscosity. This product cures extremely fast when exposed to UV light, resulting in a soft conformal coating. SEMICOSIL® 942 UV A/B exhibits low viscosity and shear-thinning properties, making it suitable for spray applications. It offers the advantage of extremely fast curing at room temperature after UV activation, as well as the ability for shadow curing. Additionally, it contains a UV tracer, providing process control options during application.

SEMICOSIL® 949 UV A/B is a pourable, addition-curing, two-part silicone rubber with low viscosity. This product cures extremely fast when exposed to UV light, resulting in a soft silicone elastomer. SEMICOSIL® 949 UV A has a mixing ratio of 10:1 for its two parts and exhibits low viscosity, making it easy to handle and process. It offers the advantage of extremely fast curing at room temperature after UV activation. The cured elastomer has low hardness (Shore 00). Additionally, SEMICOSIL® 949 UV A contains a UV tracer, providing process control options during application.

SILRES® BS 720 A is a clear coating specifically designed to create a dry erase surface on various construction material substrates. It is formulated as a neat, solvent-free, one-part (1K) product with a silicone hybrid chemistry. SILRES® BS 720 A offers several advantages, including a very low odor and low VOC (volatile organic compound) content. When applied to compatible surfaces, SILRES® BS 720 A forms a dry erase surface, allowing users to write and erase with ease. This coating is suitable for use on a wide range of construction materials, providing versatility in application. Its clear formulation maintains the esthetic appearance of the substrate while offering the functionality of a dry-erase surface.

Circa 1850® Wood Conditioner is formulated to penetrate into the wood fibers to provide a uniform surface for staining. Circa 1850® Wood Conditioner prevents the blotching and spotting that results from inconsistent stain absorption in areas of loose and tight grain density. Uneven staining is most common on soft woods, such as pine, birch,and spruce. Always use Circa 1850® Wood Conditioner prior to staining end grains.

Super Shield™ Nickel Conductive Paint 841AR is a conductive paint that consists of a 1-part, solvent-based acrylic lacquer, pigmented with a highly conductive nickel flake. It is smooth, hard, and abrasion resistant. It can be easily applied by brush or spray. It has a quick dry time, with no heat cure necessary. It adheres strongly to most injection molded plastics, such as ABS, PBT, PVA and ABS/PC blend. It also provides strong corrosion resistance and is suitable for use in marine environments. 841AR provides a conductive coating for the interior of plastic electronic enclosures that

ClearClad DV-755 is engineered to meet lowest VOC limits. It is a latest generation e-coat with high performance& low VOC.

HeBoCoat® EL-W 300 is a highly-concentrated, water-based, boron nitride suspension which was developed especially as an additive for galvanic baths. The extremely fine boron nitride particles ensure good suspension stability and a high storage rate during the electroplating process.

HeBoCoat® PL-W 130 is a pure, water-based and ready-to-use Boron Nitride coating with inorganic binders for high temperature processes. It is particulary suited for use in aluminum casting processes.

HeBoCoat® SL-E 200 is a Boron Nitride spray supplied in a practical aerosol can. Its ethanol base enables quick drying and good substrate wetting. The organic binder ensures excellent adhesion. The use of fine Boron Nitride powder particles provides good lubricating and release properties, also at high temperatures.

HeBoCoat® PL-W 200 is a pure, water-based Boron Nitride coating with organic binder, resulting in excellent surface wetting and adhesion.

HeBoCoat®EL-W 250 is a highly concentrated water-based Boron Nitride coating for use in the aluminum casting industry and in the finishing of fiber glass.

HeBoCoat ® SL-E 125* is a boron nitride spray supplied in an easy-to-use aerosol can. The use of an ethanol base ensures good surface wetting of the coated substrate as well as quick drying. The inorganic binders ensure very good adhesion to metals, glass, ceramics and graphite, especially at high temperatures. The proportion of fine boron nitride particles endow the resultant coating with good release and lubricating properties. HeBoCoat® SL-E 125 is a Boron Nitride spray supplied in a practical aerosol can. Its ethanol base enables good substrate wetting and quick drying. The high temperature adhesive properties of the coating to metallic substrates, glass, ceramics and graphite are excellent.

HeBoCoat® PL-E 125 is a Boron Nitride coating in an ethanol base with the addition of an inorganic binder. The high temperature adhesive properties of the coating to metallic substrates, glass, ceramics and graphite are excellent.

HeBoCoat® EL-W 100 is a water-based, ready-to-use boron nitride suspension that has been developed especially as a high-temperature release layer for forming processes. Thanks to the inorganic binder system, the product offers the optimum compromise between good substrate adhesion and a very good lubricating and release effect.

HeBoCoat® PL-E 200 is a Boron Nitride coating in an ethanol base with the addition of organic binders. Because of its excellent release and lubricating properties it is frequently used in the sintering of diamond tools.

Total Ground Carbon Conductive Paint 838AR is an economical conductive paint that consists of a 1-part, solvent-based acrylic lacquer, pigmented with highly conductive carbon powder. It is smooth, durable, and abrasion resistant. It can be easily applied by brush or spray. It has a quick dry time, with no heat cure necessary. 838AR adheres strongly to most injection-molded plastics, such as ABS, PBT and PVA. It provides strong corrosion resistance and is suitable for use in marine environments. 838AR is excellent for creating grounded surfaces and in low frequency RFI shielding applications, such as pickup cavities on electric guitars. It is also perfect for shielding metal detectors and other devices where a metal-filled conductive paint would cause malfunction.

Super Shield™ Silver Coated Copper Epoxy Conductive Paint 843ER is a 2-part epoxy-based conductive paint, pigmented with highly conductive silvercoated copper flake. The cured paint is smooth and extremely hard. It is abrasion, scratch, and mar resistant. It adheres very strongly to plastics, including chemically resistant and low energy plastics, as well as metal, glass, ceramic and wood. 843ER is generally used to provide extremely durable EMI/RFI shielding for applications in harsh environments.

Super ShieldTM Nickel Conductive Spray Paint 841AR is a conductive paint that consists of a 1-part, solvent-based acrylic lacquer, pigmented with a highly conductive nickel flake. It is smooth, hard, and abrasion resistant. It has a quick dry time, with no heat cure necessary. It adheres strongly to most injection-molded plastics, such as ABS, PBT, PVA and ABS/PC blend. It also provides strong corrosion resistance and is suitable for use in marine environments. 841AR provides a conductive coating for the interior of plastic electronic enclosures that suppresses EMI/RFI emissions. It excels when corrosion resistance is a concern.

Super Shield™ Silver Epoxy Conductive Paint 842ER is a 2-part silver epoxy conductive paint. It is a smooth, flexible coating that provides excellent electrical conductivity at a low film thickness. It maintains flexibility at low temperatures, provides exceptional adhesion to a wide variety of substrates, and provides excellent environmental stability. 842ER is designed for large volume board-level or package-level EMI shielding applications. It can replace traditional metal lid, which reduces cost, board thickness, and mass.

Super Shield™ Silver Conductive Paint 842AR is a conductive paint that consists of a 1-part, solvent-based acrylic lacquer, pigmented with an extremely conductive silver flake. It is smooth, hard, and abrasion resistant. It can be easily applied by brush or spray. It has a quick dry time, with no heat cure necessary. It adheres strongly to most injection-molded plastics, such as ABS, PBT and PVA. It provides superior high frequency shielding. It also provides strong corrosion resistance, and is suitable for use in marine environments. 842AR is designed to provide a conductive coating for the interior of plastic electronic enclosures that suppresses EMI/RFI emissions. It excels when the highest level of shielding is required. Also, its thin minimum layer height makes it suitable for board level applications.

Silver Conductive Pen 842AR-P pen dispenses an acrylic lacquer pigmented with highly conductive silver flakes. The cured traces are durable and corrosion resistant. They adhere well to plastics and most electronic substrates. The traces are flexible, but the product works best on a smooth, flat, hard surface. The valve tip opens when pressed against the surface, and the flow is controlled by squeezing the barrel. This pen repairs damaged traces on keyboards, game controllers, remote controls, mixing boards, and PCBs. It also creates conductive traces for prototyping, hobbies, or maker projects. It is great for making small connections in or between circuits, such as jumpers, through-holes, bridges, and links. It can also be used to increase the surface area of contacts by painting the area around them. For applications where high conductivity is not required, the 838AR-P Carbon Conductive Pen and the 841AR-P Nickel Conductive Pen provide economical alternatives.

838AR-P pen dispenses an acrylic lacquer pigmented with conductive carbon. The cured traces are durable and corrosion resistant. They adhere well to plastics and most electronic substrates. The traces are flexible, but the product works best on a smooth, flat, hard surface. The valve tip opens when pressed against the surface, and the flow is controlled by squeezing the barrel. This pen repairs traces on keyboards, game controllers or remote controls. It is also good for making small connections, such as jumpers, through-holes, bridges, and links. It is great for drawing resistors too, and it can be used to increase the surface area of contacts by painting the area around them. Use this pen when high conductivity is not required. For applications requiring lower resistance, use the 841AR-P Nickel Conductive Pen or the 842AR-P Silver Conductive Pen.

Circa 1850® NU-LUSTRE-CR is a thick, high gloss epoxy Clear Casting Resin. One coat of NU-LUSTRE-CR equals up to 70 coats of varnish. NU-LUSTRE-CR is HEAT-Stable, remaining clear when other epoxies will haze or deform when hot objects are placed upon the surface. It can be applied over newspaper or magazine clippings, photographs, leather, wood, ceramic, rocks, dried flowers, shells and many other items. NU-LUSTRE-CR is the ideal coating for molds, tables, decorated serving trays, coasters and bar tops, and more.

Nickel Conductive Pen 841AR-P pen dispenses an acrylic lacquer pigmented with conductive nickel flakes. The cured traces are durable and corrosion resistant. They adhere well to plastics and most electronic substrates. The traces are flexible, but the product works best on a smooth, flat, hard surface. The valve tip opens when pressed against the surface, and the flow is controlled by squeezing the barrel. This pen repairs damaged traces on keyboards, game controllers, remote controls, mixing boards, and PCBs. It also creates conductive traces for prototyping, hobbies, or maker projects. It is great for making small connections in or between circuits, such as jumpers, through-holes, bridges, and links. It can also be used to increase the surface area of contacts by painting the area around them. For applications requiring lower resistance, use the 842AR-P Silver Conductive Pen. For a more economical alternative, use the 838AR-P Carbon Conductive Pen.

Super Shield™ Silver Coated Copper Conductive Paint 843AR is a conductive paint that consists of a 1-part, solvent-based acrylic lacquer, pigmented with a highly conductive silver-coated copper flake. It is smooth, hard, and abrasion resistant. It is a ready-to-spray system, with no let down necessary. It has a quick dry time, with no heat cure necessary. 843AR adheres strongly to most injection- molded plastics, such as ABS, PBT, PVA and ABS/PC blend. It provides excellent shielding levels at high frequencies. 843AR is designed to provide a conductive coating for the interior of plastic electronic enclosures that suppresses EMI/RFI emissions. It excels when higher levels of shielding are required.

Total Ground™ Carbon Conductive Spray Paint 838AR is an economical conductive paint that consists of a 1-part, solvent-based acrylic lacquer, pigmented with highly conductive carbon powder. It is smooth, durable, and abrasion resistant. It has a quick dry time, with no heat cure necessary. It adheres strongly to most injection-molded plastics, such as ABS, PBT and PVA. It provides strong corrosion resistance and is suitable for use in marine environments. 838AR is excellent for creating grounded surfaces and in low frequency RFI shielding applications, such as pickup cavities on electric guitars. It is also perfect for shielding metal detectors and other devices where a metalfilled conductive paint would cause malfunction.

Mavcoat® CRW releases hardened concrete from all forms and formliners that yields clean, easy stripping without bugholes and stains. CRW is a concentrated product used in applications that require a stronger release agent in hard to demold situations. CRW meets California, OTC, and all other Federal VOC regulations. Mavcoat CRW will not separate, so there is no need to mix before use.

Screamin' SRX Fluorescent Paint is a premium, low odor, water-based fluorescent latex paint. Maximum lightfastness and film integrity are dependent upon the use of DayGlo FILTERAY® Type "W" (clear overcoat). DayGlo® Screamin' SRX paints appear to glow in the dark when exposed to black light.

The WAW Tempera Paint is suitable for application on posters, show-cards, layouts, and displays. It is especially useful for short-term exterior displays such as signs on glass windows and automobiles. It has excellent adhesion to display materials such as paper, cardboard, glass, and many plastic foams.