Knowde Enhanced TDS
Identification & Functionality
- Base Chemicals Functions
- CASE Ingredients Functions
- Technologies
- Product Families
Features & Benefits
- Labeling Claims
- CASE Ingredients Features
- Key Attributes
- Low VOC
- Fast evaporation rate
- Enhances adhesion to plastic substrates
- Highly miscible with other common organic solvents
- Compatible with most substrates used in electronic parts and enclosures
Attention !
For industrial or laboratory use only. Not for retail sale in california, utah, and new hampshire.
Applications & Uses
- Applications
- Application Method
- Compatible Substrates & Surfaces
- Coating Type
- Applications & Usages
This fast drying time of the 435 makes is a good choice for spray application of EMI/RFI shielding and conformal coatings that require low VOC and need quick drying times.
- Thinning Instructions
Make necessary adjustments according to your paint and spray gun equipment usage instructions. A 1.0 (paint):1.0 (thinner) dilution is a common starting point. If sagging is observed, reduce the thinner ratio.
Attention !
It is preferable to use this thinner system in a temperature controlled environment. Avoid high temperatures or humidity, which can lead to dry spray and blushing respectively.
Properties
- Color
- Physical Form
- Odor
- Ketone, nail polish remover
- Physical Properties
Value | Units | Test Method / Conditions | |
Color | Clear | — | — |
Density (at 25 °C, 77 °F) | 0.8 | g/mL | — |
Viscosity (at 25 °C, 77 °F) | 0.5 (0.0005) | cP (Pa·s) | Brookfield SP1 |
Flash Point | -17 (-1.4) | °C (°F) | Closed Cup |
Freezing Point | -94 (-70) | °C (°F) | — |
Boiling Point | min. 56 (min. 133) | °C (°F) | — |
Vapor Pressure (at 25 °C [77 °F] | min. 220 (163) | hPa (mmHg) | — |
Relative Evaporation Rate (BuAc = 1) | 3.77 | — | — |
Volatile Organic Compound (VOC) | 8 (64] | % (g/mL) | — |
MIR Value (g O3/g of product) | 0.52 | — | — |
Regulatory & Compliance
- Certifications & Compliance
- Grade
Technical Details & Test Data
- Compatibility
Substrate Compatibility : The 435 Thinner is compatible with most substrate materials found on printed circuit assemblies. Its etching action can remove the need for surface preparation steps for plastics. The high solvent power can also cut through residual contaminants.
Attention !
Use with care on thin plastics or parts that are chemically sensitive. If this diluent is too active, dilute or substitute it with a diluent with less solvent power.
Solvent Miscibility : The 435 is highly miscible with other common organic solvent. It can be mixed with
- Water
- Alcohols
- Aldehydes
- Aromatic and Aliphatic Hydrocarbons
- Ethers
- Glycols
- Glycol Ethers
- Ketone
- Solvation Parameters
Solvation Parameters Values Solubility in water Highly soluble Hansen Solubility Parameters a)
(cal/cm3)½ ; [MPa]½Total
Non-Polar
Polar
Hydrogen Bonding9.7 [19.8] 7.3 [14.9] 5.1 [10.3] 3.3 [6.8] - a) Hansen parameters calculate using component literature values and volume fraction composition.
Safety & Health
- Health, Safety, and Environmental Awareness
Health and Safety : This liquid is highly flammable and should be kept away from flames and other ignition sources. Avoid breathing in fumes or direct contact with the material.
Environmental Impact : The 435 has volatile organic content of 8% [64 g/L]. It is RoHS compliant.HMIS® RATING
NFPA® 704 CODES
Approximate HMIS and NFPA Risk Ratings Legend : 0 (Low or none); 1 (Slight); 2 (Moderate); 3 (Serious); 4 (Severe)
Packaging & Availability
- Packaging Type
- Packaging and Supporting Products
Cat. No. Packaging Net Volume Net Weight Packaging Weight
435-1L Can 945 mL/ 31.9 fl oz 758 g/ 1.67 lb 5.5 kg a)/ 11.5 lb a)
435-4L Can 3.78 L/ 1 gal 3.03 kg/ 6.69 lb 3.8 kg/ 8.3 lb
- a) Pack of five bottles