Brands

jER™ is an epoxy resin brand with the longest history in Japan. Based on decades of research and accumulated technology, we are offering a wide range of epoxy resin grades with characteristic properties, such as low chlorine, low viscosity, transparency, flexibility, photo-curability, high molecular weight type, and specialized molecular structure type, to meet diverse needs of our customers.   *jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group

METABLEN™ is the trade name of modifiers, which have been developed originally by Mitsubishi chemical, a world prominent manufacture of methyl methacrylate resins. Adding a small quantity of METABLEN™ to various resins improves and increases their impact strength and processability, and further improves the characteristics, the appearance and the productivity of their final products. *METABLEN™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

SHIKOH™ is a UV curable urethane acrylate oligomer. It is used for inks, coatings, and adhesives to add various functions such as toughness, elongation and elasticity. SHIKOH™ is suitable for Ultraviolet beam (UV) and Electron beam (EB) cure system as well as thermal cure. We have wide range of grades based on properties.Bio-based grade is also available.*SHIKOH™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group

DIACRON™ are saturated copolymerized polyester resins used for coatings, inks, and adhesive applications. They have good adhesion to metals, polyester film, polycarbonate, and can be cross-linked with isocyanates, melamine, and epoxies. *DIACRON™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

Ertalyte® PET grades have the following features: Good for both wet and dry environments High strength and rigidity - ideal for close tolerance parts Excellent stain resistance Good wear resistance and excellent dimensional stability Better resistance to acids than nylon or acetal

The Semitron® Semiconductor Grade products were developed to help designers and users optimize the performance of device manufacturing equipment.  In addition to device manufacture, many of these materials are ideal for specific environments where wear-resistance, chemical-resistance and the management of static electricity are required. Two groups of products have been developed. One, well suited for device handling and test applications, and a second for next-generation CMP use.

Ketron® PEEK grades offer chemical and hydrolysis resistance similar to PPS, but can operate at higher temperature range. PEEK 1000 offers steam and wear resistance, while carbon-reinforced PEEK provides excellent wear capabilities. Our latest grade, PEEK HPV, offers outstanding bearing performance. PEEK can be used continuously to 480°F (250°C) and in hot water or steam without permanent loss in physical properties. For hostile environments, PEEK is a high strength alternative to fluoropolymers. PEEK carries a V-O flammability rating and exhibits very low smoke and toxic gas emission when exposed to flame. Excellent chemical resistance Very low moisture absorption Inherently good wear and abrasion resistance Unaffected by continuous exposure to hot water or steam

KyronMAX®, the unmatched carbon fiber-based technology platform. These compounds use a broad range of base polymers (Nylon/PA66, PEEK and PPA) that excel in demanding temperature and chemical environments.Property ComparisonMuch higher mechanical strength vs conventional glass and carbon filled systems, at same fiber percentage loadings. This increased mechanical performance, allows usage of lower filler loadings, increasing the material’s strain, which allows the part to yield and not to fracture.Standard Dynamic Mechanical Analysis (DMA) summary compares material stiffness over an elevated temperature range. Conventional glass and carbon filled Nylon compounds loose mechanical performance very quickly when exposed to even low elevated temperatures. In comparison, KyronMAX products demonstrate excellent property retention, even in the harshest of temperature regions.

SymaLITE is the name given to its special lightweight composites. These Low Weight Reinforced Thermoplastics (LWRT) make up a product group of special lightweight plastic composites with low thermal expansion and excellent mechanical and physical properties. The mixed glass and polymer fiber fleeces produced in special textile processes are supplied as rolls and boards and can be cost-efficient further-converted into three-dimensional components by low-pressure molding. The ultra-light, freely shapeable SymaLITE thermoplastic is noise-absorbent and can be faced directly with functional and decorative cover layers without adhesives having to be used. This eliminates an entire production step.

The Kyron® high performance compounds portfolio contains a broad range of base resins for stiffness, heat resistance, or dimensional tolerances. Kyron® materials that are based on high temperature resins excel in demanding high heat and chemical environments.

Fluorosint® PTFE’s unique properties are the result of a proprietary process in which synthetically manufactured mica is chemically linked to virgin PTFE. This bonding results in properties not normally attainable in reinforced PTFE. Fluorosint grades offer an excellent combination of low frictional properties and dimensional stability. Chemical resistance parallels PTFE Continuous use temperatures to 500°F (260°C) Compared to PTFE higher load carrying capability 1/9 of the deformation under load lower coefficient of thermal expansion

Sultron® products have the following features: Broad temperature range capability Good thermal and electrical insulation characteristics Hydrolysis resistant Radiation stability

Please Note: Mitsubishi Chemical does not sell NMP for skin contact applications. Mitsubishi Chemical does not sell GBL for use in contact with water.