Knowde Enhanced TDS
Identification & Functionality
- Plastics & Elastomers Functions
- Technologies
Features & Benefits
- Labeling Claims
- Materials Features
- Product Features
- Lower WVTR (water vapor transmission rate) compared to other general biodegradable plastics.
- Superior heat resistance compared to other general biodegradable plastics.
Applications & Uses
- Markets
- Plastics & Elastomers End Uses
- Plastics & Elastomers Processing Methods
Properties
- Typical Properties
- Recommended Operating Conditions
- Note
The conditions are examples for sheet molding.
Value | Units | Test Method / Conditions | |
Melt Flow Rate (at 160°C, 21.2 N) | 3.0 | g/10 min | ISO 1133 |
Melt Flow Rate (at 190°C, 21.2 N) | 16.0 | g/10 min | ISO 1133 |
Density | 1.39 | g/cm³ | ISO 1183 |
Young Modulus (Machine Direction) | 1680.0 | MPa | ISO 527-3 |
Young Modulus (Transverse Direction) | 1740.0 | MPa | ISO 527-3 |
Yield Stress (Machine Direction) | 34.0 | MPa | ISO 527-3 |
Yield Stress (Transverse Direction) | 33.0 | MPa | ISO 527-3 |
Tensile Strength (Machine Direction) | 30.0 | MPa | ISO 527-3 |
Tensile Strength (Transverse Direction) | 29.0 | MPa | ISO 527-3 |
Elongation (at Break, Machine Direction) | 9.0 | % | ISO 527-3 |
Elongation (at Break, Transverse Direction) | 9.0 | % | ISO 527-3 |
Water Vapor Transition Rate (at 40°C, 90% RH, 100 μm) | 30.0 | g/(m².day) | JIS Z 0208 |
Heat Deflection Temperature (at 0.45 MPa) | 106.0 | °C | ISO 75 |
Value | Units | Test Method / Conditions | |
Melt Temperature | 150 - 160 | °C | — |
Feed Throat | 20 - 40 | °C | — |
Feed Temperature | 150 - 160 | °C | — |
Barrel Temperature | 150 - 160 | °C | — |
Adapter Temperature | 150 - 160 | °C | — |
Die Temperature | 150 - 160 | °C | — |
Chill Roll Temperature | 40 - 50 | °C | — |
Regulatory & Compliance
- Certifications & Compliance
Packaging & Availability
- Packaging Type
- Packaging Information
Forzeas™ pellets are dried and packed in aluminum-lined packaging before delivering to customers.
Storage & Handling
- Storage and Handling Conditions
- Do not store outdoors. Keep dry at ambient temperature. Avoid humid environment, heat and direct sunlight.
- Use material as soon as possible after the delivery, in order to prevent possible material quality deterioration.
- Pre-dry of the unopened Forzeas™ is not necessary.
- It is recommended to keep packages sealed until ready to process and using up the whole 25-kg bag.
- Unused material should be tightly sealed, kept away from open air, and pre-dried (at 60 °C for over 5 hours).