Products

MOCOM Compounds TEDUR® L 9214-1 is a base polymer of polyphenylene sulfide with a filler/additive system of 45% glass fibers and 20% mineral. It is designed for highly stressed parts in the automotive and machinery market segments, and has special features of high stiffness. Pre-drying conditions include a dry air (dessiccant) dryer at 130-140°C for 2-4 hours depending on moisture content. Processing includes injection molding with a melt temperature of 320-340°C and a mold temperature greater than 140°C.

MOCOM Compounds TEDUR® L 9510-5 is a pre-drying injection molding grade polymer with a base polymer of polyphenylene sulfide. It contains 40% glass fibers, offering high stiffness and easy flow, and is used in various market segments with typical applications such as pump components and housings. The pre-drying conditions involve a dry air (dessiccant) dryer at a temperature of 130-140°C for 2-4 hours depending on the moisture content. The injection molding process requires a melt temperature of 320-340°C and a mold temperature of more than 140°C. Finally, the product should be stored in a cool, dry place and protected from light, at temperatures not exceeding 30°C.

MOCOM Compounds ALCOM® MED PS 1000 AS 14115 has a minimum shelf life of 24 months. It is based on a polystyrene impact polymer and contains an antistatic and permanent filler/additive system. It is designed for medical and personal care applications such as housings and is processed by injection molding with a melt temperature of 180-260°C and a mold temperature of 10-70°C. To ensure optimal performance, pre-drying conditions should be conducted in an air circulating dryer at 60-80°C for 2-3 h or in a dry air (dessiccant) dryer at 60-80°C for 2-3 h, depending on moisture content.

MOCOM Compounds Alcom® TCD PA66 5050 14016 is a thermal conductive and electrically insulating polyamide 66 material that is heat stabilized. It is used in a variety of market segments including automotive, machinery, electrical and electronic, and lighting. Typical applications include radiator systems, cooling systems, housings, functional components, plugs/connectors, and lamp sockets.

MOCOM Compounds ALTECH® PP-B A 4920/500 MR20 is a polypropylene heterophasic copolymer with a filler/additive system of 20% talcum. It is heat and processing stabilized and has easy flow, release, and molding properties. It is suitable for automotive, sport and leisure, and building and construction applications such as gardening tools, exterior parts, interior decoration/finishing, clothing/fasteners, and sports equipment. Processing injection molding should be done with a melt temperature of 200-250°C and a mold temperature of 20-70°C. It should be stored in a dry, light-protected environment not exceeding 30°C.

MOCOM Compounds ALCOM® MS PP 4920 GY1233-20 is a polypropylene heterophasic copolymer with 20% talcum as a filler/additive system. It is heat stabilized, scratch resistant, UV stabilized, and impact modified, making it suitable for automotive applications such as housings and fasteners. For optimal results, it should be pre-dried before processing. Injection molding should be used to process it, with a melt temperature of 200-270°C and a mold temperature of 20-70°C.

MOCOM Compounds ALTECH® PP-B A 4915/500 MR15 is a polypropylene heterophasic copolymer with 15% talcum as a filler/additive system. It has high heat stabilization, processing stabilization, and easy release (demolding) characteristics. The melting temperature for injection molding is 200-250°C and the mold temperature is 20-70°C. This material is suitable for automotive, building and construction market segments with typical applications such as housings, fixing elements, functional components and interior decoration/finishing, gardening tools, clothing/fasteners and exterior parts. To ensure optimum performance, it should be stored in a dry, light-protected environment not exceeding 30°C.

MOCOM Compounds ALTECH® PA6 A 1000/518 IM is a Polyamide 6 impact modified base polymer designed for easy release (demolding). Pre-drying should be done at 80°C in a dry air (dessiccant) dryer for 2-12 h depending on moisture content, with a maximum moisture content of 0.15%. It is suitable for automotive, machinery, and injection molded parts applications. The processing injection molding melt temperature should be between 250-270°C and the mold temperature should be between 40-80°C.

MOCOM Compounds ALCOM® ASA/PC 540/5 UV GY81-714MCF is a UV stabilized polycarbonate + Acrylonitrile Styrene Acrylate Blend with a metallic color and low tendency to flow lines. It is typically used for housings and is suitable for electrical and electronic, building and construction, and sport and leisure market segments. Pre-drying Conditions for this material are in a dry air (dessiccant) dryer 90-110°C for 2-4 hours, in an air circulating dryer 90-110°C for 4-8 hours depending on moisture content. Processing Injection molding involves using a melt temperature of 260-300°C and a mold temperature of 60-90°C. It is important to note that the material should be dried prior to molding to ensure optimal performance.

MOCOM Compounds ALTECH® PS-HI A 1000/901 BK1261-20 is a polystyrene-based injection-molding grade with easy-release (demolding) and impact properties, making it suitable for use in the automotive, electrical and electronic, and building and construction markets for injection-molded parts such as bezels and housings. Pre-drying conditions involve a dry-air (dessiccant) dryer at 60-80°C for 2-3 hours, or an air-circulating dryer at 60-80°C for 2-3 hours. Processing injection-molding requires melt temperatures of 180-260°C and mold temperatures of 10-70°C. This material should be stored in a cool, dark place to protect it from light.

MOCOM Compounds ALTECH® ABS A 1000/227 UV is a special UV-stabilized Acrylonitrile/Butadiene/Styrene/Copolymer base polymer that is suitable for injection molding with melt temperatures between 200-240°C and mold temperatures between 50-80°C. This polymer is ideal for applications such as housings, clothing/fasteners, and building and construction. It is essential to pre-dry the polymer under conditions of 80°C in a dry air (dessiccant) dryer for 2-4 hours and 80°C in an air circulating dryer for 3-6 hours, depending on moisture content, with a maximum moisture content of 0.20%. Furthermore, it should be stored in a dry environment that is protected from light and not above 30°C.

MOCOM Compounds ALCOM® PP 620/2 SV1246-04MCO is a pre-drying condition polypropylene homopolymer with a metallic effect and optimized flow line for easy flow. It is used for applications such as housings in the household goods industry and is processed through injection molding with a melt temperature of 200-270°C and a mold temperature of 20-70°C.

MOCOM Compounds ALTECH® ABS A 1000/170 is a copolymer of Acrylonitrile/Butadiene/Styrene with good flow and processing stability, suitable for injection molding at melt temperatures of 200-240°C and mold temperatures of 50-80°C. It is used in a variety of applications such as electrical and electronic, building and construction, Medical/Personal Care, ducting/piping systems, domestic appliances, valve components, housings, printer housings, paper dispensers, and operating elements.

MOCOM Compounds ALCOM® HM PA6 1000 AG UV 15046 WT1077-15 is a pre-dried polyamide 6-based material with an additive system containing a hygienic material and light stabilizer. It is white in color, similar to RAL 9003 and RAL 9016, and has antibacterial properties according to ISO 22196. This material is suitable for use in personal care, household goods, furniture, building and construction, and sport and leisure applications. When processing with injection molding, the recommended melt temperature should be between 250-270°C and the mold temperature should be between 40-80°C.

MOCOM Compounds ALTECH® PP-H A 4920/508 MR20 is a Polypropylene Homopolymer with a filler/additive system of talcum that has special features of being detectable, processing stabilized, easy release (demolding), and heat stabilized. It is mainly used in the building and construction and automotive market segments for applications such as injection molded parts, interior decoration/finishing, and functional components and housings. For optimal performance, this material should be stored in dark places and not exposed to temperatures above 30°C.

MOCOM Compounds ALTECH® PA6 A 3050/100 GB50 is a polyamide 6 base polymer with a 50% glass bead filler/additive system designed for low warpage, easy flow, easy release (demolding), and high heat stabilization. This product is used in the automotive and machinery industries to create injection molded parts, interior decoration/finishing, and exterior parts such as housings, handles, and functional components. For long-term storage, it should be kept dry in a protected area away from light, not exceeding 30°C.

MOCOM Compounds ALCOM® ABS 530/29 UV SV1269-05MCS is a UV-stabilized acrylonitrile/butadiene/styrene/copolymer with good flow and a metallic color. It is used in building and construction and sport and leisure markets for domestic appliance housings. For injection molding, it should be melted at a temperature of 220-260°C and molded at a temperature of 50-80°C.

MOCOM Compounds ALTECH® PP-B A 1000/310 IM is a polypropylene heterophasic copolymer that has been specially modified with elastomer, impact, processing, and heat stabilizers. This material is ideal for automotive applications such as exterior parts, interior decoration/finishing, and transport systems, and is commonly used for housings, functional components, and fixing elements.

MOCOM Compounds ALCOM® CFX ASA 1000 UV 15116 SV1163-15MC is a pre-drying conditions acrylonitrile/styrene/acrylate/copolymer with UV stabilized metallic effect, which has low tendency to flow lines and is easy to flow. It is used in electrical and electronic, building and construction, and sport and leisure applications and is an injection molding grade. The melt temperature for processing injection molding is 240-280°C and the mold temperature is 40-80°C.

MOCOM Compounds TEDUR® L 9511-2 is a Polyphenylene Sulfide (PPS) base polymer filled with 45% glass fibers that offers high stiffness. It is typically used in the automotive, machinery, and injection molded parts markets for applications such as pump components, pump impellers, housings, and high pressure vessels. Pre-drying conditions for TEDUR® L 9511-2 involve drying in a dry air (dessiccant) dryer at 130-140°C for 2-4 hours depending on the moisture content. Processing injection molding requires a melt temperature of 320-340°C and a mold temperature of less than 140°C.

MOCOM Compounds ALTECH® PP-B A 4430/100 MR30 is a polypropylene heterophasic copolymer with 20% chalk and 10% talcum. It is heat stabilized and has easy release (demolding) and processing stabilized characteristics. For injection molding, the melt temperature should be 200-250°C and the mold temperature should be 20-70°C. This material is applicable in the building and construction, sport and leisure markets and is typically used for housings and functional components. It should be stored in a dry, light-protected environment, not above 30°C, for optimal results.

MOCOM Compounds ALTECH® ECO PA6 4230/100 GF10 MR20 is a heat-stabilized polyamide 6 blend with 10% glass fibers and 20% mineral. Pre-drying is recommended at 80°C in a dry air (dessiccant) dryer for 2-12 hours, depending on moisture content, with a maximum moisture content of 0.15%. It is suitable for injection molding with a melt temperature of 270-290°C and a mold temperature of 80-100°C. It is typically used in the automotive market for engine covers and housings, and should be stored in a dry and light-protected environment not exceeding 30°C to ensure optimal properties.

MOCOM Compounds ALTECH® PP-H A 2030/156 GF30 CP is a polypropylene homopolymer with 30% glass fibers and a filler/additive system that is chemically coupled, heat stabilized, easy release (demolding), and contains a slip agent. It is suitable for various market segments and typical applications such as housings and injection molded parts. For optimal processing, injection molding should be done with a melt temperature of 200-250°C and a mold temperature of 20-70°C.

MOCOM Compounds ALTECH® PP-B A 2030/150 GF30 CP is a heterophasic copolymer made of polypropylene and 30% glass fibers, coupled together chemically and easy to remove. It is heat and processing stable, and is suitable for injection molding with melt temperatures of 200-250°C and mold temperatures of 20-70°C. It is most commonly used for automotive purposes such as functional components, powertrain parts, housings, fixing elements, interior and exterior decoration and finishing. To ensure optimal results, it should be pre-dried in a dry air (dessiccant) dryer or air circulating dryer at temperatures of 80-120°C for 2-4 hours.

MOCOM Compounds ALCOM® MED PS 1000 14113 is a polystyrene with a minimum shelf life of 24 months and is suitable for injection molded parts such as housings. The melt temperature for injection molding should be 180-260°C, and the mold temperature should be 10-70°C.

MOCOM Compounds ALCOM® PP 620/10 GY1464-04MCF is a polypropylene heterophasic copolymer with a gray, metallic color. It features flow line optimization, low tendency to produce flow lines, slip agent, and heat stabilization. This product is suitable for applications such as household items and housings, and can be processed using injection molding with a melt temperature of 200-270°C and mold temperature 20-70°C.

MOCOM Compounds ALTECH® PA6 B 2030/500 GF30 is a polyamide 6-based polymer with a 30% glass fiber filler/additive system. It is glycol, hot oil, and chemically resistant, has good flow, easy release properties, and is highly heat stabilized. This polymer is suitable for automotive, building and construction, and machinery applications, and can be used in the manufacturing of engine and drive systems, injection molded parts, clothing/fasteners, and exterior parts. Typical applications include different automotive powertrain parts, oil pans/sumps, and functional components, as well as housings.

MOCOM Compounds ALTECH® ECO PC 1000/542 FR UV is a polycarbonate base polymer with special features including UV stabilization, easy release (demolding), and flame retardant. It contains recycled material and is suitable for electrical and electronic applications, such as housings, plugs/connectors, and functional components.

MOCOM Compounds ALTECH® ECO PC 1000/521 IM UV is a polycarbonate base polymer with UV stabilization, easy release (demolding) and impact modification. It is suitable for pre-drying conditions at 120°C in a dry air (dessiccant) dryer for 2-4 hours or in an air circulating dryer at 100-120°C for 4-12 hours depending on moisture content (max. moisture content <0.02%). It has multiple market segments, including electrical and electronic, lighting, and various, and is suitable for exterior fixtures/fittings and various garden equipment and housings. To ensure optimal performance, it should be kept out of direct sunlight.

MOCOM Compounds ALCOM® MED PS 1000 19041 is a polystyrene injection molding grade suitable for medical and personal care applications, with a minimum shelf life of 24 months. Processing injection molding requires a melt temperature of 180-260°C and a mold temperature of 10-70°C. It is typically used for manufacturing housings and other medical devices.

MOCOM Compounds ALTECH® PP-H A 4940/506 MR40 is a polypropylene homopolymer suitable for processing injection molding. It contains a filler/additive system of 40% talcum which provides processing stabilization, easy release (demolding), slip agent, and heat stabilization. Typical applications include housings and functional components for the automotive, building and construction markets, such as pump components, filter systems, and fixtures/fittings. For optimal results, this product should be stored in a dry, light-protected environment not exceeding 30°C.

MOCOM Compounds ALCOM® ABS 530/22 SV1287-04MCS is a Base Polymer of Acrylonitrile/Butadiene/Styrene/Copolymer with a metallic effect color. It has good flow and is typically used to make housings for domestic appliances. Pre-drying Conditions include 80°C in an air circulating dryer for 3-6 hours and 80°C in a dry air (dessiccant) dryer for 2-4 hours depending on moisture content. For processing Injection molding, the melt temperature should be between 220-260°C and the mold temperature should be between 50-80°C.

MOCOM Compounds ALTECH® PP-H A 2030/156.01 GF30 CP is a Polypropylene Homopolymer suitable for injection molding with a melt temperature of 200-250°C and a mold temperature of 20-70°C, containing a 30% glass fiber filler/additive system which is chemically coupled, heat stabilized, and contains a slip agent for easy release (demolding). This material is suitable for a variety of automotive and other market segments and can be used for applications such as housings and injection molded parts. To ensure optimal performance, it should be stored in a dry environment, away from light, and at a temperature not exceeding 30°C. It is also recommended to handle this material with care as it can be sensitive to pressure and heat.

MOCOM Compounds ALTECH® ECO PC 1000/141 FR is a polycarbonate base polymer with special features such as UV stabilization, easy release (demolding), and flame retardant impact modification. It is suitable for pre-drying conditions in an air circulating dryer at 100-120°C for 4-12 hours, or 120°C in a dry air (dessiccant) dryer for 2-3 hours, dependent on the moisture content with a maximum moisture content of 0.02%. It can be used for applications in the electrical and electronic, lighting, and various markets such as housings, security engineering parts, sockets, plugs/connectors, and various others.

MOCOM Compounds ALCOM® CFX ABS 1000 18037 SV1035-18MC is a pre-dried acrylonitrile/butadiene/styrene/copolymer with a metallic effect that is used for injection molded parts such as housings and bezels. It is suitable for electrical and electronic, building and construction, and sport and leisure applications. Pre-drying conditions are 80°C in a dry air dessiccant dryer for 2-4 hours and 80°C in an air circulating dryer for 3-6 hours depending on moisture content. For processing injection molding, the melt temperature should be between 220-260°C and the mold temperature should be between 50-80°C. It is important to protect the material from light and store it in a dark, dry place.

MOCOM Compounds ALCOM® MS PP 4920 BK1248-20 is a Polypropylene Heterophasic Copolymer containing 20% talcum, which is heat stabilized, scratch resistant, UV stabilized, and impact modified. It is suitable for use in Automotive applications such as housings and clothing/fasteners. Pre-drying should be done in an air circulating dryer at 60-90°C for 2-4 hours, or in a dry air (dessiccant) dryer at 60-90°C for 2-4 hours depending on moisture content. For injection molding, the melt temperature should be set at 200-270°C and mold temperature at 20-70°C.