Enhanced TDS
Knowde-enriched technical product data sheet
Identification & Functionality
- Chemical Family
- Polymer Name
- Plastics & Elastomers Functions
- Technologies
- Product Families
Features & Benefits
Applications & Uses
- Markets
- Applications
- Plastics & Elastomers End Uses
- Plastics & Elastomers Processing Methods
Properties
- Mechanical Properties
Value Units Test Method / Conditions Flexural Modulus 2250.0 MPa ISO 178 Flexural Stress (3.5% Strain) 39.0 MPa ISO 178 Tensile Modulus 2200.0 MPa ISO 527 Tensile Stress at Yield 25.0 MPa ISO 527 Tensile Elongation at Yield 1.2 % ISO 527 Tensile Elongation at Break 16.0 % ISO 527 Impact Strength (Charpy, at 23°C) 30.0 kJ/m² ISO 179/1eU Impact Strength (Charpy, at -40°C) 25.0 kJ/m² ISO 179/1eU Notched Impact Strength (Charpy, at 23°C) 6.0 kJ/m² ISO 179/1eA - Physical Properties
Value Units Test Method / Conditions Density 1030.0 kg/m³ ISO 1183 - Thermal Properties
Value Units Test Method / Conditions Vicat B50 81.0 °C ISO 306 HDT / A (1.8 MPa) 76.0 °C ISO 75-1/-2 - Flammability
Value Units Test Method / Conditions Flammability (1.5 mm) HB class UL 94 Glow Wire (GWFI, 650°C, 1mm) Passed - DIN EN 60695 Glow Wire (GWFI, 650°C, 2mm) Passed - DIN EN 60695 - Processing Information (Injection Molding)
Value Units Test Method / Conditions Mould Temperature 10 - 70 °C - Melt Temperature 180 - 260 °C - - Rheological Properties
Value Units Test Method / Conditions Melt Index (MVR) 14.0 cm³/10min ISO 1133 MVR Temperature 200.0 °C - MVR Load 5.0 kg - Shrinkage (24h) 0.3 - 0.6 % ISO 294-4
Regulatory & Compliance
Technical Details & Test Data
- Pre-Drying Conditions
- In a dry air (dessiccant) dryer 60-80 °C for 2-3 h
- In an air circulatIng dryer 60-80 °C for 2-3 h
- Dependant on moisture content
Storage & Handling
- Shelf Life
- Minimum 24 months
- Storage Conditions
Store in dry, protected from light not above 30°C.