Knowde Enhanced TDS
Identification & Functionality
- Metalworking Fluid Type
- Product Type
- Technologies
- Product Families
Features & Benefits
- Labeling Claims
- Ready-to-Use Product Features
- Product Highlights
- Excellent Corrosion Inhibition
- Nitrite-Free
- Chlorine-Free
- Phenol-Free
- Very Low Foam – Excellent on High Pressure or High Speed Machining
- Excellent Cooling for Ability to Maintain Close Tolerances
- Tolerant of Hard Water
- Resistant to Damage from Tramp Oil
- Water Extendable- Economical
- Long Tank Life
Applications & Uses
- Markets
- Application Area
- Compatible Substrates & Surfaces
- Applications
ASTRO-CUT SYN G has been designed for machining most metals except magnesium. Excellent on cast iron. This product may also be used for grinding: blanchard, diamond wheel, belt, disk, etc. NOTE: Since this product is completely oil-free, it may be used in most coolant mist units for machining and grinding operations.
- Recommended Concentration
Application Concentration Ratio Refractometer Milling, Drilling, Turning 5%-10% 1:10-1:20 1.4-2.7 Centerless, ID, OD, Surface Grinding 4% 1:25 1.1 Tapping, Sawing, Reaming 10% 1:10 2.7 - Mixing
Concentration, % 4% 5% 6% 7% 8% 9% 10% Ratio 1:25 1:20 1:17 1:14 1:12 1:11 1:10 Refractometer 1.1 1.4 1.6 1.9 2.2 2.4 2.7
Properties
- Physical Form
- Appearance
- Blue liquid, Transparent blue (Dilution)
- Typical Properties
| Value | Units | Test Method / Conditions | |
| Residual Film | Soft, soluble | - | - |
| pH (at 20:1) | 9.3 - 9.7 | - | - |
| Specific Gravity (at 60°F) | 1 - 1.06 | - | - |
| Density | 8.5 - 8.7 | lbs/gal | - |
| Flash Point | Nil | - | PMCC |
Regulatory & Compliance
- Certifications & Compliance
- Chemical Inventories