Products

Redicote E-11E is a emulsifier for cationic slow set bitumen emulsions for tack, prime, slurry seal and cold mix applications. Emulsifier for oils and resins sed for dust control and rejuvenating. Break retarder for slurry.

Armeen 18D Flake is a distilled primary amine, octadecyl supplied in the flake form.

Akucell AF 2405 carboxymethyl cellulose is an odorless and tasteless powder typically used as thickener, stabilizer or water retention aid. It has a viscosity range of 800-1200 mPa.s.

Ethylan DA-4 is Ethoxylated Iso-Decyl Alcohol.

Berol ENV226 Plus is an optimized surfactant blend intended for use in water based alkaline and acid cleaners.

Redicote C-450-S is a emulsifier for cationic quick set bitumen emulsions for slurry and micro surfacing. Break retarder for quick set slurry surfacing and micro surfacing.

Akucell AF 2785 carboxymethyl cellulose is an odorless and tasteless powder typically used as thickener, stabilizer or water retention aid. It is used in animal feed and food applications.

DRY-FLO TS PURE is an irradiated version of Dry-Flo TS starch that is an aluminum-free, non-GMO modified tapioca starch ideal for reducing greasiness, gloss, and tack in the most oily formulations. Its low-protein content is ideal for formulations for sensitive skin and reduced allergy concerns compared to corn-base starches. Patent pending.

Alcosperse LV-71 is a 80% VOC hair sprays containing approximately 15% water, AMPHOMER LV-71 polymer can provide fine atomization as well as the superior features and benefits expected from AMPHOMER polymer, including excellent stiffness and high humidity curl retention properties. AMPHOMER LV-71 polymer’s composition is also covered under US Patent 9,119,972 B2, and can act as a hair shield for hot heating implements such as flat irons and curling wands, helping to protect the hair cuticle from hair damage caused by heat.

Witconate P-1460EH is a linear anionic emulsifier.

Morwet IP Powder is a sodium isopropyl naphthalene sulfonate.

DRY-FLO ELITE BN is surface treated with boron nitride. Its platelet particle shape provides a high degree of slip and lubricity to cosmetic formulations. DRY-FLO ELITE BN starch exhibits a very lubricious feel, better coverage, and improved adhesion.

Witconate P-1220EH is a calcium dodecylbenzene sulfonate (branched) in 2-ethylhexanol and propyleneglycol.

Redicote E-620 is a nonionic co-emulsifier and wetting agent for prime emulsion, dust control and rejuvenating oil emulsions.

Triameen Y12D is a distilled dodecyl dipropylene triamine.

Redicote E-47 NPF is a nonionic emulsifier for the production of slow-setting emulsions from bitumen, tall oil pitch, dust oils and resins.

Ethylan CDP 1480 is a nonionic dispersant and wetting agent. It can be used to replace nonylphenols (NP) in waterborne paints to improve color acceptance when adding a colorant to the white base. Benefits Cost-effective wetting agent Easy to handle Good foam control Increased gloss Features Very low VOC content Compatible with all other surfactant types, i.e. nonionic, anionic and cationic Stable under alkaline and acidic conditions

Duomeen HT is an active adhesion promoter in solid (pellet) form for hot bitumen, cut back bitumen or soft bitumen for use in surface dressing (chipseal), and cold and warm mixes.

Redicote E-5 HF is a emulsifier and co-emulsifier for cationic bitumen emulsions used for tack, prime, and cold mix applications.

Sponto EC-336 is an APE-free hydrophilic anionic/nonionic emulsifier blend (amind DDBS and castor oil ethoxylate) in A-150 solvent, designed for IOE @, 4-D in aliphatic or aromatic solvent.

Balance® 47, a unique, hydrophobically modified acrylic resin, has been specially designed to produce superior performance in low volatile organic compound (VOC) aerosol and pump hair sprays that contain water. In such systems, the negative effects of water are well known. Water contributes to both increased viscosity and increased surface tension resulting in wetter sprays with a larger particle size. These sprays are inefficient in coating the hair. Water also affects initial curl droop, drying time, polymer holding properties, and stiffness of the hair. Furthermore, the increased viscosity due to the water can limit the polymer solids of the spray and can result in actuator blockage. Due to its unique composition and molecular weight distribution, Balance® 47 polymer hair fixative overcomes the effects of water over abroad range of hair spray VOC content.

Redicote E-16 is a liquid emulsifier for cationic rapid- and medium-setting bitumen emulsions suitable for chip seal, tack coat and open graded cold mix. Active adhesion promoter for pre-coated chips, cutback or soft bitumen.

Amadol CMA 8 is a ethoxylated cocoamide mainly used as wetting and dispersing agent in several applications.

Morwet D-500 Powder is a sodium salt of naphtalene sulfonate condensatie (NSC) with block copolymer.

Redicote EM24 is a liquid emulsifier for cationic rapid and medium-setting bitumen emulsions suitable for chipseal and open graded cold mix.

Bermocoll CST 818 is a non-ionic, water soluble cellulose ether with enhanced enzyme resistance. It improves the consistency, the stability, and the water retention of water based products.

Nouryon C-6330 is a typical blending non-ionic surfactant which is widely used in pesticides as adjuvant.

Berol 904 is a non ionic surfactant of castor oil ethylene oxide adduct type, compatible with anionic and nonionic products and possesses high HLB.

Amaze SP 100% natural polymer provides humidity-resistant style retention, volume and anti-frizz performance for hair products. Its exceptional sensory and look makes it the ideal choice for natural and nude styling products that deliver touchable hold. Amaze SP polymer is a new entry into the hair styling market designed to offer consumers a more natural hold in use. It can be formulated into a variety of hair styling products ranging from mousses to creams and even sprays. The polymer itself is 100% natural and derived from plants only. It is manufactured using an extremely eco-conscious process to deliver a sustainable styling polymer. Amaze SP is soluble in water and water/ethanol solutions.

Dissolvine GL-47-S is a Glutamic acid, N,N-diacetic acid, tetrasodium salt (GLDA) Dissolvine GL is a bio-based, readily biodegradable, cruelty free, globally acceptable and effective chelating agent for Personal Care. With an outstanding environmental profile and friendly INCI name, it’s an ideal choice to bring enhanced preservation, stability, and performance to your formulations. Dissolvine GL is available as a 47% solution in water, Dissolvine GL-47-S in solid form.

Bermocoll Prime 3500 is a non-ionic, water soluble cellulose ether with enhanced enzymatic resistance and superior color stability. It improves the consistency, the stability, and the water retention of water based paints.

Amadol CMA 12 is a Ethoxylated cocoamide mainly used as dispersing and wetting agent in several applications.

GABROSA M 100 is a non-ionic, water soluble cellulose ether intended as a water retaining and consistency improving additive to cement based mortars.

Bermocoll ML 11 is a modified non-ionic, water soluble cellulose ether, intended as a water retaining and consistency improving additive to cement based mortars. Bermocoll ML 11 contains methyl, ethyl and hydroxyethyl substituents giving a unique Balance between workability and strength.

Adsee C-70A is a Coco Amidoamine-based surfactant designed to be a cost effective alternative for in-can and tank-mix herbicide and fungicide applications. It is a readily biodegradable and sustainable alternative to tallow amines and other synthetic adjuvants. It has excellent bio-efficacy and is cost-effective, offering high compatibility with herbicide salts.

DERMACRYL 79 is a hydrophobic, high molecular weight carboxylated acrylic copolymer. DERMACRYL 79 is inherently moisture resistant — the polymer can be used in waterproof sunscreens as well as a variety of creams and lotions. It forms an excellent low-shine film for resistance to abrasion or rub-off and helps maintain active ingredients at the application site. It meets the Credo Clean Standard and the requirements for Ulta Beauty's Conscious Beauty.