LNP LUBRICOMP™ Compound - JD4901 - SABIC's Specialty

Identification & Functionality

Additives Included: Lubricant (PTFE)
Chemical Family: Polyetherimide (PEI),
Polyimides (PI)
Fillers Included: Glass Fiber,
PTFE
Polymer Name: Polyether Imide (PEI)
Plastics & Elastomers Functions: Resin
Technologies: Plastics
Product Families: Plastics — Engineering & Specialty Polymers
High Performance Thermoplastics

Features & Benefits

Materials Features: Friction Resistant,
High Temperature Resistance,
Very Good Heat Resistance,
Wear Resistant

Applications & Uses

Markets: Building & Construction,
Consumer Goods,
Electrical & Electronics,
Personal Care,
Printing & Packaging
Applications: Consumer Goods — Appliances & Electronics
Building & Construction — Decorative Materials & Finishes
Artificial Turf
Electrical & Electronics — Devices & Assemblies
Consumer Electronics,
Displays
Consumer Goods — Lawn & Garden
Printing & Packaging — Packaging
Non-Food Consumer Packaging
Personal Care — Packaging & Accessories
Applicators & Accessories
Electrical & Electronics — Parts & Components
Connectors,
Housings & Enclosures,
Semiconductor Manufacturing,
Switches & Relays,
Terminal Blocks, Plugs & Sockets
Consumer Goods — Sports & Recreation
Plastics & Elastomers End Uses: Amusement Machine,
Appliances,
Building Materials,
Burn-In Socket,
Cell Phones,
Circuit Protection,
Commercial Appliance,
Computer Components,
Consumer Applications,
Containers,
Covers,
Displays,
Doors,
Electrical Components,
Electrical/Electronic Applications,
Electronic Components,
Enclosure,
Home Appliances,
Housings,
Personal Accessories,
Pool Covers,
Semiconductor Applications,
Sporting Goods,
Tablets,
Tarpaulins,
Test socket,
Turf Applications,
Windows
Plastics & Elastomers Processing Methods: Injection Molding

Properties

Flame Rating: UL 94 V0
Mechanical Properties
Physical Properties
Thermal Properties
Electrical Properties
Impact Properties
Injection Molding
Flame Characteristics
Note: ᵍ Measurements made from Laboratory test Coupon. Actual shrinkage may vary outside of range due to differences in processing conditions, equipment, part geometry and tool design. It is recommended that mold shrinkage studies be performed with surrogate or legacy tooling prior to cutting tools for new molded article.

ᵖ UL ratings shown on the technical datasheet might not cover the full range of thicknesses and colors. For details, please see the UL Yellow Card.

⁷ Injection Molding parameters are only mentioned as general guidelines. These may not apply or may need adjustment in specific situations such as low shot sizes, large part molding, thin wall molding and gas-assist molding.

¹¹ The information stated on Technical Datasheets should be used as indicative only for material selection purposes and not be utilized as specification or used for part or tool design.

	Value	Units	Test Method / Conditions
Heat Deflection Temperature (at 0.45 MPa, 3.2 mm, Unannealed) ¹¹	213	°C	ASTM D648
Relative Temperature Index (Electrical) ᵖ ¹¹	105	°C	UL 746B
Relative Temperature Index (Mechanical with impact) ᵖ ¹¹	105	°C	UL 746B
Relative Temperature Index (Mechanical without impact) ᵖ ¹¹	105	°C	UL 746B

	Value	Units	Test Method / Conditions
Surface Resistivity ¹¹	1.00E+16	Ω	ASTM D257

	Value	Units	Test Method / Conditions
Izod Impact (Notched, at 23°C) ¹¹	78	J/m	ASTM D256

	Value	Units	Test Method / Conditions
Back Pressure (Plastic Pressure) ⁷	5 - 10	MPa	—
Drying Temperature ⁷	150	°C	—
Drying Time ⁷	4 - 6	Hrs	—
Front - Zone 3 Temperature ⁷	380 - 410	°C	—
Maximum Moisture Content ⁷	0.02	%	—
Melt Temperature ⁷	380 - 410	°C	—
Middle - Zone 2 Temperature ⁷	370 - 400	°C	—
Mold Temperature ⁷	140 - 170	°C	—
Nozzle Temperature ⁷	380 - 405	°C	—
Rear - Zone 1 Temperature ⁷	360 - 390	°C	—
Screw Speed (Circumferential speed) ⁷	0.1 - 0.2	m/s	—
Shot to Cylinder Size ⁷	40 - 70	%	—

	Value	Units	Test Method / Conditions
UL Recognized (94V-0 Flame Class Rating) ᵖ	min. 0.75	mm	UL 94

Regulatory & Compliance

Packaging & Availability

LNP™ LUBRICOMP™ Compound JD4901