LNP LUBRICOMP™ Compound - KCL34A - SABIC's Specialty

Identification & Functionality

Features & Benefits

Materials Features: Electrically Conductive,
Friction Resistant,
High Stiffness,
High Strength,
Light Weight,
Wear Resistant

Applications & Uses

Markets: Building & Construction,
Consumer Goods,
Electrical & Electronics,
Healthcare & Pharma,
Personal Care,
Printing & Packaging
Applications: Consumer Goods — Appliances & Electronics
Building & Construction — Decorative Materials & Finishes
Artificial Turf
Electrical & Electronics — Devices & Assemblies
Consumer Electronics,
Displays
Consumer Goods — Lawn & Garden
Healthcare & Pharma — Medical
Tubing & Fluids Handling
Printing & Packaging — Packaging
Non-Food Consumer Packaging
Personal Care — Packaging & Accessories
Applicators & Accessories
Electrical & Electronics — Parts & Components
Connectors,
Switches & Relays
Consumer Goods — Sports & Recreation
Plastics & Elastomers End Uses: Appliances,
Building Materials,
Cell Phones,
Commercial Appliance,
Computer Components,
Consumer Applications,
Containers,
Displays,
Doors,
Electrical Components,
Electrical/Electronic Applications,
Home Appliances,
Personal Accessories,
Pool Covers,
Sporting Goods,
Tablets,
Tarpaulins,
Turf Applications,
Windows
Plastics & Elastomers Processing Methods: Injection Molding

Properties

Mechanical Properties
Physical Properties
Thermal Properties
Electrical Properties
Impact Properties
Injection Molding
Note: ᵍ Measurements made from Laboratory test Coupon. Actual shrinkage may vary outside of range due to differences in processing conditions, equipment, part geometry and tool design. It is recommended that mold shrinkage studies be performed with surrogate or legacy tooling prior to cutting tools for new molded article.

⁷ Injection Molding parameters are only mentioned as general guidelines. These may not apply or may need adjustment in specific situations such as low shot sizes, large part molding, thin wall molding and gas-assist molding.

¹¹ The information stated on Technical Datasheets should be used as indicative only for material selection purposes and not be utilized as specification or used for part or tool design.

	Value	Units	Test Method / Conditions
Density ¹¹	1.55	g/cm³	ISO 1183
Density ¹¹	1.56	g/cm³	ASTM D792
Moisture Absorption (at 23°C, 50% RH, 24hrs) ¹¹	0.3	%	ASTM D570
Mold Shrinkage (flow, 24 hrs) ᵍ ¹¹	0.7	%	ASTM D955
Mold Shrinkage (flow, 24 hrs) ᵍ ¹¹	0.73	%	ISO 294
Mold Shrinkage (xflow, 24 hrs) ᵍ ¹¹	1.3	%	ASTM D955
Mold Shrinkage (xflow, 24 hrs) ᵍ ¹¹	1.3	%	ISO 294
Wear Factor Washer ¹¹	69	10^-10 in^5-min/ft-lb-hr	ASTM D3702 Modified: Manual
Dynamic COF ¹¹	0.35	—	ASTM D3702 Modified: Manual
Static COF ¹¹	0.32	—	ASTM D3702 Modified: Manual

	Value	Units	Test Method / Conditions
Heat Deflection Temperature (at 0.45 MPa, 3.2 mm, Unannealed) ¹¹	175	°C	ASTM D648
Heat Deflection Temperature (at 1.82 MPa, 3.2mm, Unannealed) ¹¹	171	°C	ASTM D648
Coefficient of Thermal Expansion (at -40°C to 40°C, flow) ¹¹	0.000027	1/°C	ISO 11359-2
Coefficient of Thermal Expansion (at -40°C to 40°C, flow) ¹¹	0.000027	1/°C	ASTM E831
Coefficient of Thermal Expansion (at -40°C to 40°C, xflow) ¹¹	0.0000666	1/°C	ASTM E831
Coefficient of Thermal Expansion (at -40°C to 40°C, xflow) ¹¹	0.000066	1/°C	ISO 11359-2
Heat Deflection Temperature/Bf (at 0.45 Mpa, Flatw 80104, sp=64mm) ¹¹	175	°C	ISO 75/Bf
Heat Deflection Temperature/Af (at 1.8 Mpa, Flatw 80104, sp=64mm) ¹¹	170	°C	ISO 75/Af

	Value	Units	Test Method / Conditions
Surface Resistivity ¹¹	1000000	Ω	ASTM D257

	Value	Units	Test Method / Conditions
Izod Impact (Unnotched, at 23°C) ¹¹	267	J/m	ASTM D4812
Izod Impact (Notched, at 23°C) ¹¹	53	J/m	ASTM D256
Instrumented Dart Impact Energy (Peak, at 23°C) ¹¹	4	J	ASTM D3763
Multi-Axial Impact ¹¹	1	J	ISO 6603
Izod Impact (Unnotched, 80104, at 23°C) ¹¹	16	kJ/m²	ISO 180/1U
Izod Impact (Notched, 80104, at 23°C) ¹¹	3	kJ/m²	ISO 180/1A

Packaging & Availability

LNP™ LUBRICOMP™ Compound KCL34A