LNP™ LUBRICOMP™ Compound NL001

Identification & Functionality

Additives Included

Heat Stabilizer,

Impact Modifier,

Lubricant (PTFE),

Mold Release Agent

Fillers Included

PTFE

Polymer Name

PC/ABS Alloy

Plastics & Elastomers Functions

Resin

Technologies

Plastics

Product Families

Plastics — Engineering & Specialty Polymers

Blends & Alloys

Features & Benefits

Materials Features

Friction Resistant,

Good Mold Release,

Heat Stabilized,

Impact Modified,

Unreinforced,

Wear Resistant

Applications & Uses

Markets

Building & Construction,

Consumer Goods,

Electrical & Electronics,

Personal Care,

Printing & Packaging

Applications

Consumer Goods — Appliances & Electronics

Building & Construction — Decorative Materials & Finishes

Artificial Turf

Electrical & Electronics — Devices & Assemblies

Consumer Electronics,

Displays

Consumer Goods — Lawn & Garden

Printing & Packaging — Packaging

Healthcare Packaging,

Non-Food Consumer Packaging

Personal Care — Packaging & Accessories

Applicators & Accessories

Electrical & Electronics — Parts & Components

Connectors,

Housings & Enclosures,

Switches & Relays

Consumer Goods — Sports & Recreation

Plastics & Elastomers End Uses

Appliances,

Building Materials,

Cell Phones,

Commercial Appliance,

Computer Components,

Consumer Applications,

Containers,

Displays,

Door Components,

Door Trim,

Doors,

Electrical Components,

Electrical/Electronic Applications,

Enclosure,

Home Appliances,

Personal Accessories,

Pharmaceutical Packaging,

Pool Covers,

Sporting Goods,

Tablets,

Tarpaulins,

Turf Applications,

Windows,

Wireless Communication

Plastics & Elastomers Processing Methods

Injection Molding,

Thin Wall Injection Molding

Properties

Flame Rating

UL 94 HB

Mechanical Properties

	Value	Units	Test Method / Conditions
Tensile Stress (Yield, Type I, 50 mm/min) ¹¹	53	MPa	ASTM D638
Tensile Stress (Break, Type I, 50 mm/min) ¹¹	43	MPa	ASTM D638
Tensile Strain (Yield, Type I, 50 mm/min) ¹¹	3.6	%	ASTM D638
Tensile Strain (Break, Type I, 50 mm/min) ¹¹	24.3	%	ASTM D638
Tensile Modulus (at 50 mm/min) ¹¹	2400	MPa	ASTM D638
Flexural Stress (Yield, 1.3 mm/min, 50 mm span) ¹¹	86	MPa	ASTM D790
Flexural Modulus (at 1.3 mm/min, 50 mm span) ¹¹	2440	MPa	ASTM D790
Tensile Stress (Yield, 5 mm/min) ¹¹	45	MPa	ISO 527
Tensile Stress (Break, 5 mm/min) ¹¹	40	MPa	ISO 527
Tensile Stress (Yield, 50 mm/min) ¹¹	50	MPa	ISO 527
Tensile Stress (Break, 50 mm/min) ¹¹	40	MPa	ISO 527
Tensile Strain (Yield, 5 mm/min) ¹¹	4	%	ISO 527
Tensile Strain (Break, 5 mm/min) ¹¹	45	%	ISO 527
Tensile Strain (Yield, 50 mm/min) ¹¹	4	%	ISO 527
Tensile Strain (Break, 50 mm/min) ¹¹	20	%	ISO 527
Tensile Modulus (at 1 mm/min) ¹¹	2300	MPa	ISO 527
Flexural Stress (Yield, at 2 mm/min) ¹¹	80	MPa	ISO 178
Flexural Modulus (at 2 mm/min) ¹¹	2500	MPa	ISO 178

Physical Properties

	Value	Units	Test Method / Conditions
Specific Gravity ¹¹	1.14	—	ASTM D792
Mold Shrinkage (flow, 3.2 mm) ᵍ ¹¹	0.5 - 0.7	%	SABIC method
Mold Shrinkage (on Tensile Bar, flow) ᵍ ¹¹	0.5 - 0.7	%	SABIC method
Density ¹¹	1.1	g/cm³	ISO 1183
Melt Volume Rate (at 260°C, 5.0 kg) ¹¹	26	cm³/10 min	ISO 1133

Thermal Properties

	Value	Units	Test Method / Conditions
Heat Deflection Temperature (at 0.45 MPa, 3.2 mm, Unannealed) ¹¹	116	°C	ASTM D648
Heat Deflection Temperature (at 1.82 MPa, 3.2mm, Unannealed) ¹¹	99	°C	ASTM D648
Coefficient of Thermal Expansion (at 23°C to 80°C, flow) ¹¹	0.00007	1/°C	ISO 11359-2
Coefficient of Thermal Expansion (at 23°C to 80°C, xflow) ¹¹	0.000087	1/°C	ISO 11359-2
Ball Pressure Test (at 73°C to 77°C) ¹¹	Pass	—	IEC 60695-10-2
Ball Pressure Test (approximate maximum) ¹¹	100	°C	IEC 60695-10-2
Vicat Softening Temperature (Rate B/50) ¹¹	113	°C	ISO 306
Vicat Softening Temperature (Rate B/120) ¹¹	115	°C	ISO 306
Heat Deflection Temperature/Ae (at 1.8 Mpa, Edgew 120*10*4, sp=100mm) ¹¹	95	°C	ISO 75/Ae
Heat Deflection Temperature/Bf (at 0.45 Mpa, Flatw 80*10*4, sp=64mm) ¹¹	114	°C	ISO 75/Bf
Relative Temperature Index (Electrical) ᵖ ¹¹	60	°C	UL 746B
Relative Temperature Index (Mechanical with impact) ᵖ ¹¹	60	°C	UL 746B
Relative Temperature Index (Mechanical without impact) ᵖ ¹¹	60	°C	UL 746B

Electrical Properties

	Value	Units	Test Method / Conditions
Volume Resistivity ¹¹	min. 1.E+15	Ω.cm	IEC 60093
Surface Resistivity (ROA) ¹¹	min. 1.E+15	Ω	IEC 60093

Impact Properties

	Value	Units	Test Method / Conditions
Izod Impact (Notched, 80*10*4, at 23°C) ¹¹	10	kJ/m²	ISO 180/1A
Izod Impact (Notched, at 23°C) ¹¹	160	J/m	ASTM D256
Instrumented Dart Impact Total Energy (at 23°C) ¹¹	42	J	ASTM D3763
Izod Impact (Notched, 80*10*4, at -30°C) ¹¹	8	kJ/m²	ISO 180/1A
Charpy Impact (at 23°C, V-notch Edgew 80*10*4 sp=62mm) ¹¹	13	kJ/m²	ISO 179/1eA
Charpy Impact (at -30°C, V-notch Edgew 80*10*4 sp=62mm) ¹¹	10	kJ/m²	ISO 179/1eA

Injection Molding

	Value	Units	Test Method / Conditions
Drying Temperature ⁷	90 - 100	°C	—
Drying Temperature ⁷	80	°C	—
Drying Time ⁷	4	Hrs	—
Drying Time ⁷	2 - 4	Hrs	—
Maximum Moisture Content ⁷	0.02	%	—
Melt Temperature ⁷	240 - 270	°C	—
Melt Temperature ⁷	250 - 270	°C	—
Front - Zone 3 Temperature ⁷	230 - 270	°C	—
Front - Zone 3 Temperature ⁷	260 - 270	°C	—
Nozzle Temperature ⁷	220 - 260	°C	—
Middle - Zone 2 Temperature ⁷	250 - 260	°C	—
Middle - Zone 2 Temperature ⁷	230 - 270	°C	—
Rear - Zone 1 Temperature ⁷	230 - 245	°C	—
Rear - Zone 1 Temperature ⁷	210 - 240	°C	—
Mold Temperature ⁷	60 - 90	°C	—
Mold Temperature ⁷	40 - 80	°C	—
Back Pressure ⁷	0.2 - 0.3	MPa	—
Hopper Temperature ⁷	60 - 80	°C	—
Screw Speed ⁷	30 - 60	rpm	—

Flame Characteristics

	Value	Units	Test Method / Conditions
UL Recognized (94HB Flame Class Rating) ᵖ	min. 0.75	mm	UL 94
Oxygen Index (LOI) ᵖ	21	%	ISO 4589

Note

• ᵍ Measurements made from Laboratory test Coupon. Actual shrinkage may vary outside of range due to differences in processing conditions, equipment, part geometry and tool design. It is recommended that mold shrinkage studies be performed with surrogate or legacy tooling prior to cutting tools for new molded article.
• ᵖ UL ratings shown on the technical datasheet might not cover the full range of thicknesses and colors. For details, please see the UL Yellow Card.
• ⁷ Injection Molding parameters are only mentioned as general guidelines. These may not apply or may need adjustment in specific situations such as low shot sizes, large part molding, thin wall molding and gas-assist molding.
• ¹¹ The information stated on Technical Datasheets should be used as indicative only for material selection purposes and not be utilized as specification or used for part or tool design.

 

Regulatory & Compliance

Certifications & Compliance

UL 94

Packaging & Availability

Regional Availability

• Americas
• Europe
• North America