LNP THERMOCOMP™ Compound - DZ004 - SABIC's Specialty

Identification & Functionality

Additives Included: Mold Release Agent
Chemical Family: Polycarbonate (PC)
Fillers Included: Glass Fiber,
Milled Glass Fiber
Polymer Name: Polycarbonate (PC)
Plastics & Elastomers Functions: Resin
Technologies: Plastics
Product Families: Plastics — Engineering & Specialty Polymers
High Performance Thermoplastics,
Polycarbonates

Features & Benefits

Materials Features: Cost Effective,
Good Mold Release,
High Stiffness,
Low Warpage

Applications & Uses

Markets: Building & Construction,
Consumer Goods,
Electrical & Electronics,
Healthcare & Pharma,
Personal Care,
Printing & Packaging
Applications: Consumer Goods — Appliances & Electronics
Building & Construction — Decorative Materials & Finishes
Artificial Turf
Electrical & Electronics — Devices & Assemblies
Consumer Electronics,
Displays
Consumer Goods — Lawn & Garden
Healthcare & Pharma — Medical
Medical Devices & Assemblies
Printing & Packaging — Packaging
Non-Food Consumer Packaging
Personal Care — Packaging & Accessories
Applicators & Accessories
Electrical & Electronics — Parts & Components
Connectors,
Switches & Relays
Plastics & Elastomers End Uses: Building Materials,
Cell Phones,
Computer Components,
Consumer Applications,
Containers,
Displays,
Doors,
Electrical Components,
Electrical/Electronic Applications,
Garden Equipment,
Lawn Equipment,
Medical Devices,
Personal Accessories,
Pool Covers,
Tablets,
Tarpaulins,
Turf Applications,
Windows
Plastics & Elastomers Processing Methods: Injection Molding

Properties

Flame Rating: UL 94 V1,
UL 94 V2
Mechanical Properties
Physical Properties
Thermal Properties
Electrical Properties
Impact Properties
Injection Molding
Flame Characteristics
Note: ᵍ Measurements made from Laboratory test Coupon. Actual shrinkage may vary outside of range due to differences in processing conditions, equipment, part geometry and tool design. It is recommended that mold shrinkage studies be performed with surrogate or legacy tooling prior to cutting tools for new molded article.

ᵖ UL ratings shown on the technical datasheet might not cover the full range of thicknesses and colors. For details, please see the UL Yellow Card.

⁷ Injection Molding parameters are only mentioned as general guidelines. These may not apply or may need adjustment in specific situations such as low shot sizes, large part molding, thin wall molding and gas-assist molding.

¹¹ The information stated on Technical Datasheets should be used as indicative only for material selection purposes and not be utilized as specification or used for part or tool design.

	Value	Units	Test Method / Conditions
Density ¹¹	1.41	g/cm³	ASTM D792
Mold Shrinkage (flow, 24 hrs) ᵍ ¹¹	0.3	%	ASTM D955

	Value	Units	Test Method / Conditions
Heat Deflection Temperature (at 1.82 MPa, 3.2mm, Unannealed) ¹¹	136	°C	ASTM D648
Relative Temperature Index (Electrical) ᵖ ¹¹	125	°C	UL 746B
Relative Temperature Index (Mechanical with impact) ᵖ ¹¹	115	°C	UL 746B
Relative Temperature Index (Mechanical without impact) ᵖ ¹¹	125	°C	UL 746B

	Value	Units	Test Method / Conditions
Hot Wire Ignition (PLC 0) ¹¹	min. 1.5	mm	UL 746A
High Ampere Arc Ignition (PLC 2) ¹¹	min. 3	mm	UL 746A
Volume Resistivity ¹¹	40000000000000000 - 59000000000000000	Ω.cm	ASTM D257
High Ampere Arc Ignition (PLC 4) ¹¹	min. 1.5	mm	UL 746A
Surface Resistivity ¹¹	30900000000000 - 38700000000000	Ω	ASTM D257
Dielectric Strength (in air, at 1.6mm) ¹¹	24.3	kV/mm	ASTM D149
High Voltage Arc Track Rate (PLC) ¹¹	4	PLC Code	UL 746A
Dissipation Factor (at at 1 MHz) ¹¹	0.0083	—	ASTM D150

	Value	Units	Test Method / Conditions
Izod Impact (Unnotched, at 23°C) ¹¹	1142	J/m	ASTM D4812
Izod Impact (Notched, at 23°C) ¹¹	58	J/m	ASTM D256

	Value	Units	Test Method / Conditions
UL Recognized (94V-1 Flame Class Rating) ᵖ	min. 3	mm	UL 94
UL Recognized (94V-2 Flame Class Rating) ᵖ	min. 1.5	mm	UL 94

Regulatory & Compliance

Packaging & Availability

LNP™ THERMOCOMP™ Compound DZ004