LNP™ THERMOCOMP™ Compound JF003E

Identification & Functionality

Additives Included

Flame Retardant

Chemical Family

Polysulfones

Fillers Included

Glass Fiber

Polymer Name

Polyethersulfone (PES)

Plastics & Elastomers Functions

Resin

Technologies

Plastics

Product Families

Plastics — Engineering & Specialty Polymers

High Performance Thermoplastics

Features & Benefits

Labeling Claims

No Added PFAS

Materials Features

Cost Effective,

Easy To Mold,

Flame Retardant,

Good Moldability,

Good Processability,

High Modulus,

High Stiffness,

High Temperature Resistance,

No Added PFAS,

Very Good Heat Resistance

Applications & Uses

Markets

Building & Construction,

Consumer Goods,

Electrical & Electronics,

Personal Care,

Printing & Packaging

Applications

Consumer Goods — Appliances & Electronics

Building & Construction — Decorative Materials & Finishes

Artificial Turf

Electrical & Electronics — Devices & Assemblies

Consumer Electronics,

Displays

Consumer Goods — Lawn & Garden

Printing & Packaging — Packaging

Non-Food Consumer Packaging

Personal Care — Packaging & Accessories

Applicators & Accessories

Electrical & Electronics — Parts & Components

Connectors,

Switches & Relays

Consumer Goods — Sports & Recreation

Plastics & Elastomers End Uses

Appliances,

Building Materials,

Cell Phones,

Commercial Appliance,

Computer Components,

Consumer Applications,

Containers,

Displays,

Doors,

Electrical Components,

Electrical/Electronic Applications,

Garden Equipment,

Home Appliances,

Lawn Equipment,

Personal Accessories,

Pool Covers,

Sporting Goods,

Tablets,

Tarpaulins,

Turf Applications,

Windows

Plastics & Elastomers Processing Methods

Injection Molding

Properties

Mechanical Properties

	Value	Units	Test Method / Conditions
Tensile Stress (Break, 5 mm/min) ¹¹	101	MPa	ISO 527
Tensile Strain (Break, 5 mm/min) ¹¹	2.3	%	ISO 527
Tensile Modulus (at 1 mm/min) ¹¹	5660	MPa	ISO 527
Flexural Stress ¹¹	174	MPa	ISO 178
Flexural Modulus (at 2 mm/min) ¹¹	5330	MPa	ISO 178
Tensile Strain (Break, Type I, 5 mm/min) ¹¹	2.8	%	ASTM D638
Tensile Stress (Break, Type I, 5 mm/min) ¹¹	107	MPa	ASTM D638
Tensile Modulus (at 5 mm/min) ¹¹	5660	MPa	ASTM D638
Flexural Strength (at 1.3 mm/min, 50 mm span) ¹¹	174	MPa	ASTM D790
Flexural Modulus (at 1.3 mm/min, 50 mm span) ¹¹	5680	MPa	ASTM D790

Physical Properties

	Value	Units	Test Method / Conditions
Moisture Absorption (at 23°C, 50% RH) ¹¹	0.9	%	ISO 62
Specific Gravity ¹¹	1.49	—	ASTM D792
Density ¹¹	1.48	g/cm³	ASTM D792
Moisture Absorption (at 23°C, 50% RH, 24hrs) ¹¹	0.45	%	ASTM D570
Mold Shrinkage (flow, 24 hrs) ᵍ ¹¹	0.4 - 0.6	%	ASTM D955
Mold Shrinkage (xflow, 24 hrs) ᵍ ¹¹	0.6 - 0.8	%	ASTM D955

Thermal Properties

	Value	Units	Test Method / Conditions
Heat Deflection Temperature/Bf (at 0.45 Mpa, Flatw 80*10*4, sp=64mm) ¹¹	218	°C	ISO 75/Bf
Heat Deflection Temperature/Af (at 1.8 Mpa, Flatw 80*10*4, sp=64mm) ¹¹	211	°C	ISO 75/Af
Heat Deflection Temperature (at 0.45 MPa, 3.2 mm, Unannealed) ¹¹	218	°C	ASTM D648
Heat Deflection Temperature (at 1.82 MPa, 3.2mm, Unannealed) ¹¹	210	°C	ASTM D648
Coefficient of Thermal Expansion (at -30°C to 30°C, flow) ¹¹	0.000042	1/°C	ASTM D696
Coefficient of Thermal Expansion (at -30°C to 30°C, xflow) ¹¹	0.000047	1/°C	ASTM D696

Impact Properties

	Value	Units	Test Method / Conditions
Izod Impact (Notched, 80*10*4, at 23°C) ¹¹	5	kJ/m²	ISO 180/1A
Izod Impact (Unnotched, 80*10*4, at 23°C) ¹¹	33	kJ/m²	ISO 180/1U
Multi-Axial Impact ¹¹	1	J	ISO 6603
Izod Impact (Notched, at 23°C) ¹¹	43	J/m	ASTM D256
Izod Impact (Unnotched, at 23°C) ¹¹	500	J/m	ASTM D4812
Instrumented Dart Impact Total Energy (at 23°C) ¹¹	7	J	ASTM D3763

Injection Molding

	Value	Units	Test Method / Conditions
Drying Temperature ⁷	120 - 150	°C	—
Drying Time ⁷	4	Hrs	—
Maximum Moisture Content ⁷	0.05	%	—
Melt Temperature ⁷	355 - 370	°C	—
Front - Zone 3 Temperature ⁷	370 - 380	°C	—
Middle - Zone 2 Temperature ⁷	360 - 370	°C	—
Rear - Zone 1 Temperature ⁷	345 - 355	°C	—
Mold Temperature ⁷	140 - 150	°C	—
Back Pressure ⁷	0.3 - 0.7	MPa	—
Screw Speed ⁷	60 - 100	rpm	—

Note

• ᵍ Measurements made from Laboratory test Coupon. Actual shrinkage may vary outside of range due to differences in processing conditions, equipment, part geometry and tool design. It is recommended that mold shrinkage studies be performed with surrogate or legacy tooling prior to cutting tools for new molded article.
• ⁷ Injection Molding parameters are only mentioned as general guidelines. These may not apply or may need adjustment in specific situations such as low shot sizes, large part molding, thin wall molding and gas-assist molding.
• ¹¹ The information stated on Technical Datasheets should be used as indicative only for material selection purposes and not be utilized as specification or used for part or tool design.

 

Packaging & Availability

Country Availability

Canada,

China (Mainland),

Mexico,

USA

Regional Availability

• Americas
• Asia
• Europe
• North America