LNP™ THERMOCOMP™ Compound PCAF04FRHH

Identification & Functionality

Additives Included

Flame Retardant,

Heat Stabilizer,

Mold Release Agent

Fillers Included

Glass Fiber

Polymer Name

PC/ABS Alloy

Plastics & Elastomers Functions

Resin

Technologies

Plastics

Product Families

Plastics — Engineering & Specialty Polymers

Blends & Alloys

Features & Benefits

Labeling Claims

Bromine-free,

Chlorine-free

Materials Features

Cost Effective,

Flame Retardant,

Good Mold Release,

Heat Stabilized,

High Modulus,

High Stiffness,

Non-brominated,

Non-chlorinated

Applications & Uses

Markets

Building & Construction,

Consumer Goods,

Electrical & Electronics,

Personal Care,

Printing & Packaging

Applications

Consumer Goods — Appliances & Electronics

Building & Construction — Decorative Materials & Finishes

Artificial Turf

Electrical & Electronics — Devices & Assemblies

Consumer Electronics,

Displays

Consumer Goods — Lawn & Garden

Printing & Packaging — Packaging

Non-Food Consumer Packaging

Personal Care — Packaging & Accessories

Applicators & Accessories

Electrical & Electronics — Parts & Components

Connectors,

Housings & Enclosures,

Switches & Relays

Consumer Goods — Sports & Recreation

Plastics & Elastomers End Uses

Appliances,

Building Materials,

Cell Phones,

Commercial Appliance,

Computer Components,

Consumer Applications,

Containers,

Displays,

Electrical Components,

Electrical/Electronic Applications,

Enclosure,

Fishing Lines,

Fishing Nets,

Garden Equipment,

Home Appliances,

Lawn Equipment,

Personal Accessories,

Pool Covers,

Sporting Goods,

Tablets,

Tarpaulins,

Turf Applications

Plastics & Elastomers Processing Methods

Injection Molding

Properties

Flame Rating

UL 94 V0

Mechanical Properties

	Value	Units	Test Method / Conditions
Tensile Stress (Break, 5 mm/min) ¹¹	85	MPa	ISO 527
Tensile Modulus (at 1 mm/min) ¹¹	6.20E+03	MPa	ISO 527
Flexural Stress (Break, 2 mm/min) ¹¹	130	MPa	ISO 178
Flexural Strain (Break, at 2 mm/min) ¹¹	2.5	%	ISO 178
Flexural Modulus (at 2 mm/min) ¹¹	5800	MPa	ISO 178

Physical Properties

	Value	Units	Test Method / Conditions
Mold Shrinkage (flow) ᵍ ¹¹	0.2 - 0.4	%	SABIC method
Mold Shrinkage (xflow) ᵍ ¹¹	0.3 - 0.5	%	SABIC method
Density ¹¹	1.32	g/cm³	ISO 1183
Melt Volume Rate (at 260°C, 5.0 kg) ¹¹	8	cm³/10 min	ISO 1133

Thermal Properties

	Value	Units	Test Method / Conditions
Vicat Softening Temperature (Rate B/120) ¹¹	130	°C	ISO 306
Heat Deflection Temperature/Ae (at 1.8 Mpa, Edgew 120*10*4, sp=100mm) ¹¹	118	°C	ISO 75/Ae
Relative Temperature Index (Electrical) ᵖ ¹¹	80	°C	UL 746B
Relative Temperature Index (Mechanical with impact) ᵖ ¹¹	80	°C	UL 746B
Relative Temperature Index (Mechanical without impact) ᵖ ¹¹	80	°C	UL 746B

Electrical Properties

	Value	Units	Test Method / Conditions
Comparative Tracking Index (UL, PLC) ¹¹	4	PLC Code	UL 746A
Comparative Tracking Index ʳ ¹¹	150	V	IEC 60112

Impact Properties

	Value	Units	Test Method / Conditions
Izod Impact (Notched, 80*10*4, at 23°C) ¹¹	23	kJ/m²	ISO 180/1A

Injection Molding

	Value	Units	Test Method / Conditions
Drying Temperature ⁷	80 - 90	°C	—
Drying Time ⁷	2 - 4	Hrs	—
Maximum Moisture Content ⁷	0.02	%	—
Melt Temperature ⁷	230 - 270	°C	—
Nozzle Temperature ⁷	220 - 260	°C	—
Front - Zone 3 Temperature ⁷	230 - 270	°C	—
Middle - Zone 2 Temperature ⁷	220 - 260	°C	—
Rear - Zone 1 Temperature ⁷	200 - 230	°C	—
Hopper Temperature ⁷	60 - 80	°C	—
Mold Temperature ⁷	50 - 70	°C	—

Flame Characteristics

	Value	Units	Test Method / Conditions
UL Recognized (94V-0 Flame Class Rating) ᵖ	min. 1.5	mm	UL 94
Glow Wire Ignitability Temperature (at 2.0 mm) ᵖ	825	°C	IEC 60695-2-13
Glow Wire Ignitability Temperature (at 1.5 mm) ᵖ	825	°C	IEC 60695-2-13
Glow Wire Flammability Index (at 2 mm) ᵖ	960	°C	IEC 60695-2-12
Glow Wire Flammability Index (at 1.5 mm) ᵖ	960	°C	IEC 60695-2-12

Note

• ᵍ Measurements made from Laboratory test Coupon. Actual shrinkage may vary outside of range due to differences in processing conditions, equipment, part geometry and tool design. It is recommended that mold shrinkage studies be performed with surrogate or legacy tooling prior to cutting tools for new molded article.
• ᵖ UL ratings shown on the technical datasheet might not cover the full range of thicknesses and colors. For details, please see the UL Yellow Card.
• ʳ UL Ratings shown on the technical datasheet might not cover the full range of thicknesses, colors and regions. For details, please see the UL Yellow Card.
• ⁷ Injection Molding parameters are only mentioned as general guidelines. These may not apply or may need adjustment in specific situations such as low shot sizes, large part molding, thin wall molding and gas-assist molding.
• ¹¹ The information stated on Technical Datasheets should be used as indicative only for material selection purposes and not be utilized as specification or used for part or tool design.

 

Regulatory & Compliance

Certifications & Compliance

UL 94

Packaging & Availability

Country Availability

Canada,

China (Mainland),

Mexico,

USA

Regional Availability

• Americas
• Asia
• Europe
• North America