NORYL™ Resin NC212

Identification & Functionality

Additives Included

Flame Retardant

Fillers Included

Carbon Fiber

Polymer Name

PPO/PS Alloy

Plastics & Elastomers Functions

Resin

Technologies

Plastics

Product Families

Plastics — Engineering & Specialty Polymers

Blends & Alloys

Features & Benefits

Materials Features

ESD Protection,

Electrically Conductive,

Flame Retardant,

Good Moldability,

Good Processability,

High Flowability,

High Stiffness,

High Strength,

Light Weight,

Non-Halogenated,

Non-brominated,

Non-chlorinated,

UL Listed

Applications & Uses

Markets

Consumer Goods,

Electrical & Electronics

Applications

Consumer Goods — Appliances & Electronics

Electrical & Electronics — Devices & Assemblies

Consumer Electronics,

Displays

Plastics & Elastomers End Uses

Appliances,

Cash Dispenser (ATM),

Cell Phones,

Commercial Appliance,

Computer Components,

Consumer Applications,

Displays,

Electrical/Electronic Applications,

Tablets,

Ticket Machine

Plastics & Elastomers Processing Methods

Injection Molding

Properties

Flame Rating

UL 94 V1

Mechanical Properties

	Value	Units	Test Method / Conditions
Tensile Stress (Yield) ¹¹	83	MPa	SABIC - Japan Method
Tensile Strain (Break) ¹¹	4 - 6	%	SABIC - Japan Method
Flexural Stress ¹¹	125	MPa	ASTM D790
Flexural Modulus ¹¹	6080	MPa	ASTM D790
Hardness (Rockwell M) ¹¹	88	—	ASTM D785

Physical Properties

	Value	Units	Test Method / Conditions
Specific Gravity ¹¹	1.16	—	ASTM D792
Water Absorption (at 23°C, 24hrs) ¹¹	0.06	%	ASTM D570
Mold Shrinkage (flow, 3.2 mm) ᵍ ¹¹	0.1 - 0.3	%	SABIC method

Thermal Properties

	Value	Units	Test Method / Conditions
Heat Deflection Temperature (at 0.45 MPa, 3.2 mm, Unannealed) ¹¹	134	°C	ASTM D648
Coefficient of Thermal Expansion (at -30°C to 30°C) ¹¹	0.000025 - 0.000045	1/°C	TMA

Electrical Properties

	Value	Units	Test Method / Conditions
Surface Resistivity	1000 - 100000000	Ω	ASTM D257

Impact Properties

	Value	Units	Test Method / Conditions
Izod Impact (Notched, at 23°C) ¹¹	49	J/m	ASTM D256

Flame Characteristics

	Value	Units	Test Method / Conditions
UL Recognized (94V-1 Flame Class Rating) ᵖ	min. 1.5	mm	UL 94

Note

• ᵍ Measurements made from Laboratory test Coupon. Actual shrinkage may vary outside of range due to differences in processing conditions, equipment, part geometry and tool design. It is recommended that mold shrinkage studies be performed with surrogate or legacy tooling prior to cutting tools for new molded article.
• ¹¹ The information stated on Technical Datasheets should be used as indicative only for material selection purposes and not be utilized as specification or used for part or tool design.
• ᵖ UL ratings shown on the technical datasheet might not cover the full range of thicknesses and colors. For details, please see the UL Yellow Card.

 

Regulatory & Compliance

Certifications & Compliance

UL 94

Packaging & Availability

Country Availability

China (Mainland)

Regional Availability

• Asia